1. Introduction
Thank you for choosing the HORACO 24 Port Gigabit Ethernet Switch. This unmanaged switch is designed to provide high-speed network connectivity for small to medium-sized enterprises, security video surveillance systems, hotels, and campus environments. Featuring 24 Gigabit RJ45 ports, it supports 10/100/1000Mbps adaptive seamless connection and offers advanced functionalities like VLAN, QoS, and Loop Alarm. This manual will guide you through the installation, setup, and operation of your new switch.
2. Safety Information
- Ensure the power supply voltage matches the device's requirements (AC 100-240V, 50/60Hz).
- Do not open the device casing. Refer all servicing to qualified personnel.
- Avoid placing the device in areas with high humidity, extreme temperatures, or direct sunlight.
- Ensure proper ventilation to prevent overheating. The device features a fanless cooling design.
- Keep the device away from water or other liquids.
- Use only the provided power cord or a compatible replacement.
- The device is designed to operate in temperatures between 0°C and 40°C.
3. Package Contents
Please check the package contents carefully. If any item is missing or damaged, contact your vendor.
- Switch: 1 pcs
- Power Cord: 1 pcs
- User Manual: 1 copy (This document)
- Certificate of Inspection: 1 pcs
- Rack-mounted kit: 1 pair (Rack Ears)
4. Product Overview
The HORACO 24 Port Gigabit Ethernet Switch provides 24 full Gigabit RJ45 ports, each capable of achieving a bidirectional transmission rate of 1000Mbps. It supports MDI/MDIX for automatic cable type detection and 100/1000Mbps rate adaptation, ensuring seamless connectivity.
4.1. Front Panel
The front panel features 24 RJ45 ports (1-22 standard, 23-24 uplink/aggregation) and LED indicators for monitoring status.
4.2. LED Indicators
| LED Name | Status | Description |
|---|---|---|
| PWR LED | Green On | Powered on |
| Green Off | Powered off | |
| Loop LED | Red On | Closed loop detected |
| Red Off | No loop detected | |
| Link LED | Green On | Link normal |
| Green Off | Link blocked | |
| Flashing | Data transmitting | |
| 1000M LED | On | 1G Link normal |
| Off | 10/100M Link normal | |
| Flashing | Data transmitting |
5. Installation
The HORACO 24 Port Gigabit Ethernet Switch supports diversified installation options, including desktop placement and standard 1U rack mounting.
5.1. Desktop Mounting
Simply place the switch on a flat, stable surface such as a desk or shelf. Ensure there is adequate space around the device for proper ventilation.
5.2. Rack Mounting
For rack installation, use the provided rack-mounted kit (rack ears). Attach the rack ears to the sides of the switch using the screws. Then, secure the switch into a standard 1U server rack.
6. Setup
The HORACO 24 Port Gigabit Ethernet Switch is designed for plug-and-play operation, requiring no complex configuration for basic functionality.
6.1. Initial Connection
- Connect the power adapter to the switch's power input and plug it into a power outlet. The PWR LED should illuminate green.
- Connect your network devices (computers, printers, servers, etc.) to any of the 24 RJ45 ports using standard Ethernet cables. The Link LED for each connected port will light up, and flash during data transmission.
6.2. Working Modes (Dial Switch)
The switch features a dial switch on the front panel to select between three working modes:
- Default Mode: All ports communicate with each other. This is the standard operating mode.
- VLAN Mode (Port Isolation): Ports 1-22 are isolated from each other but can communicate with ports 23 and 24 (uplink/aggregation ports). This mode enhances network security and reduces broadcast storms.
- Extend Mode: Ports 1-22 support 100Mbps speed reduction negotiation and can extend transmission distance up to 250 meters in 10Mbps mode. Ports 23-24 function as aggregation ports. This mode is useful for connecting devices over longer distances.
To change the working mode, adjust the dial switch to the desired setting. It is recommended to power cycle the switch after changing modes for the new setting to take full effect.
7. Operating the Switch
Once powered on and connected, the switch operates automatically. It is an unmanaged device, meaning it requires no software configuration for basic network functions. Data packets are forwarded based on MAC addresses using a store-and-forward method.
- Data Transmission: When a device sends data, the switch learns its MAC address and forwards the data to the correct destination port.
- Speed Negotiation: Each port automatically negotiates the optimal speed (10/100/1000Mbps) and duplex mode (Full-Duplex & Half-Duplex) with the connected device.
- QoS (Quality of Service): Ports 1-8 support QoS data priority, ensuring critical network traffic receives preferential treatment.
- Loop Alarm: The switch includes a loop alarm function to detect and alert you to network loops, which can cause network instability. The Loop LED will turn red if a loop is detected.
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the switch. Do not use liquid or aerosol cleaners.
- Ventilation: Ensure that the honeycomb cooling holes on the sides of the switch are not obstructed to maintain optimal heat dissipation.
- Environmental Conditions: Operate the switch within the specified temperature (0-40°C) and humidity (10%-90% non-condensing) ranges to ensure longevity and stable performance.
- Firmware Updates: As an unmanaged switch, firmware updates are generally not required or available.
9. Troubleshooting
9.1. No Power
- Check if the power cord is securely connected to the switch and the power outlet.
- Verify that the power outlet is functional.
- Ensure the PWR LED is illuminated green. If not, try a different power cord or outlet.
9.2. No Link/Connectivity
- Ensure the Ethernet cable is securely connected to both the switch port and the network device.
- Check the Link LED for the corresponding port. If it's off, try a different cable or port.
- Verify that the network device is powered on and functioning correctly.
- If in VLAN mode, ensure devices are connected to ports 23 or 24 if they need to communicate with other isolated ports.
- If in Extend mode, ensure the connected device supports 100Mbps or 10Mbps for extended range.
9.3. Network Performance Issues
- Check for a red Loop LED. If illuminated, a network loop is present. Disconnect devices one by one to identify the loop source.
- Ensure all cables are Cat5e or higher for optimal Gigabit performance.
- Verify that connected devices are capable of Gigabit speeds if 1000M LED is not on.
10. Specifications
| Feature | Specification |
|---|---|
| Product Name | 24-Port Gigabit Intelligent Ethernet Switch |
| Model Number | ZX-SWG10240D |
| Port Definition | 24 * 10/100/1000M RJ45 Ports |
| Switch Type | Fast Switch (Unmanaged) |
| Port Standard | IEEE802.3 (Ethernet), IEEE802.3u (Fast Ethernet), IEEE802.3ab (Gigabit Ethernet), IEEE802.3x (Flow Control) |
| Bandwidth | 48Gbps |
| Packet Forwarding Rate | 35.71Mpps |
| Packet Buffer | 4.1Mbit |
| MAC Address Table | 8K |
| Transmission Method | Store and Forward |
| Communication Mode | Full-Duplex & Half-Duplex |
| Power Supply | AC 100-240V, 50/60Hz; Output: DC 12V 2A |
| Mainboard Power Consumption | 15W |
| Operating Temperature | 0~40°C |
| Storage Temperature | -40~70°C |
| Operating Humidity | 10%~90%, non-condensing |
| Storage Humidity | 5%~95%, non-condensing |
| Surge Protection | Port Surge: Common mode 4KV, differential mode 2KV |
| Electrostatic ESD | Air 8KV, contact mode 6KV |
| Product Dimensions | 268mm x 181mm x 44mm |
| Net Weight | 1.16KG |
| Fan Quantity | 0 (Fanless) |
| Certifications | CE, FCC, RoHS |
11. User Tips
- Power Cable Compatibility: If the provided power cable is a 3-prong type and your outlet is 2-prong, a compatible 2-prong power cable can be used. Ensure proper grounding if modifying the power setup.
- Performance Expectation: Users have noted that this switch can offer improved performance (e.g., better buffering or faster processing) compared to smaller, lower-port-count switches.
- Cost-Effective Solution: This 24-port switch is considered a cost-effective solution for expanding network capacity without compromising on Gigabit speeds.
12. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact your vendor directly. Keep your proof of purchase for any warranty claims.
A digital version of this user manual is available as a PDF: View User Manual (PDF)