Introduction
Thank you for choosing the SANPKON Multi-Function Massager, Model SPK-912. This device is designed to provide various physiotherapy treatments, including TENS, EMS, and Acupuncture, to help relax muscles and alleviate discomfort across the full body. Please read this manual carefully and thoroughly before using the product to ensure safe and effective operation.
Image: The SANPKON Multi-Function Massager (SPK-912) with electrode pads and wires.
Product Features
- Versatile Therapy: Offers 36 working modes and 30 intensity levels for comprehensive treatment.
- User-Friendly Design: Features silicone controls and a large, clear, eye-friendly display.
- Long-lasting Battery: Equipped with a 1200mAh battery capacity for extended use.
- Durable Electrodes: Utilizes 3.5mm thickened copper electrodes for efficient and durable performance.
- Dual Output Channels: Allows for simultaneous use of multiple electrode pads on different body areas.
Video: Product demonstration highlighting key features and comparison with older models.
Package Contents
The standard package includes:
- 1 x SANPKON Multi-Function Massager (SPK-912)
- 8 x Electrode Pads (4 pairs)
- 2 x Electrode Wires
- 1 x Charging Cable (USB-C)
- 1 x User Manual (this document, also available as PDF: Download PDF)
Image: Contents of the 'No Box' package variant, showing the massager, pads, wires, charging cable, and manual.
Setup
- Charge the Device: Before first use, ensure the massager's battery is fully charged. Connect the provided USB-C charging cable to the device and a suitable power source. The battery capacity is 1200mAh.
- Connect Electrode Wires: The massager has two output ports, labeled 'A' and 'B', at the bottom. Connect the electrode wires to the desired output ports. Each wire can connect to two electrode pads.
Image: Bottom view of the massager showing output ports A and B.
- Attach Electrode Pads: Connect the electrode pads to the ends of the electrode wires. Ensure the pads are clean and firmly attached to the wires.
- Prepare Skin: Clean and dry the skin area where you intend to apply the electrode pads. The skin should be free of oils, lotions, or powders to ensure proper adhesion and conductivity.
- Apply Electrode Pads: Firmly apply the electrode pads to the desired treatment area on your body. Ensure that all electrode pads connected to the same output port are applied to the body of the same person, maintaining a certain distance between them.
Image: Massager connected to four electrode pads, demonstrating dual channel use.
Operating Instructions
- Power On/Off: Press the 'ON/OFF' button located on the side of the device to turn the massager on or off.
- Select Output Port (if applicable): If using multiple channels, ensure the correct output port (A or B) is selected for the pads you wish to activate.
- Select Mode: Press the 'M' button to cycle through the 36 available working modes. The selected mode will be displayed on the screen. The modes include various TENS, EMS, and Acupuncture patterns such as:
- Fast beating light acupuncture
- Slow beating heavy acupuncture
- Acupuncture
- Massage light acupuncture
- Beat, Beat quickly, Beat slowly
- Beat quickly knead, Press, Press + lift
- Knead + lin, Beat press
- Cupping, Scraping + Cupping
- Acupuncture + Cupping, Tapping Cupping
- Gua Sha, Gua Sha + Feel numb
- Beating Gua Sha, Thump Gua Sha
- Light kneading feel numbing, Light tapping light kneading
- Kneading, Heavy kneading
- Foot massage kneading, Foot massage, Foot massage tapping, Foot massage + feel numb
- Massage, Feel numb massage
- Percussion + massage, Acupuncture massage
- Pat, Pat + knead, Light Thump + knead, Hard Thump + knead
- Adjust Intensity: After selecting a mode, use the '+' and '-' buttons to adjust the intensity level. There are 30 intensity levels. Start with a low intensity and gradually increase it to a comfortable level.
- Set Treatment Time: The default treatment duration is 20 minutes. Press the 'T' button to adjust the time. The maximum adjustable time is 10 minutes (this seems to be a typo in the OCR, likely meaning 10-minute increments or a maximum of 60 minutes, but adhering to the OCR).
- During Treatment: If you need to move or reposition the electrode pads during a session, always turn off the massager first before making adjustments.
Image: A user demonstrating the application of electrode pads to the arm.
Image: A user demonstrating the application of electrode pads to the wrist.
Maintenance
- Cleaning: Wipe the massager unit with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
- Electrode Pads: Replace electrode pads immediately if they lose their adhesive quality. Ensure the area where electrodes are applied is clean and free of substances (e.g., powder, oil) to prevent premature detachment and maintain hygiene.
- Storage: Store the device and accessories in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting & Safety Guidelines
If you experience any discomfort during use, immediately turn off the device and consult a healthcare professional.
Usage Precautions & Contraindications:
- Do not use simultaneously with high-frequency surgical equipment, shortwave, or microwave devices.
- Avoid using in environments with strong electromagnetic radiation.
- Do not apply electrode pads to damaged skin or scar tissue.
- Do not use on areas with acute skin anomalies or other acute diseases.
- Do not leave the electrode pads adhering to the same area for more than 3 minutes to prevent skin irritation.
- Do not use the device during sleep, while driving, or while bathing.
- Do not use simultaneously with implanted electronic devices (e.g., pacemakers), artificial hearts, artificial lungs, or other life-supporting medical equipment.
- The device is prohibited for use by pregnant women, women during menstruation, individuals with acute skin anomalies, or other acute medical conditions.
- Ensure no metal objects are in contact with the electrode pads during use.
- Different body parts have varying electrical impedances, which can affect intensity. You may need to adjust intensity when switching treatment areas.
Specifications
| Parameter | Value |
|---|---|
| Product Name | Multi-Function Massager |
| Model | SPK-912 |
| Input Power | 10W |
| Battery Capacity | 1200mAh |
| Rated Current | 180mA |
| Input Voltage | 5V (<50V AC) |
| Working Modes | 36 Modes |
| Intensity Levels | 30 Levels |
| Electrode Line Thickness | 3.5mm (Thickened Copper) |
| Electronic | Yes |
| Batteries Included | No (Internal rechargeable battery) |
Image: Comparison of the SPK-912 with an older model, detailing improved specifications.
User Tips
Based on general user feedback for similar devices, consider the following:
- Start Low, Go Slow: Always begin with the lowest intensity setting and gradually increase it until you find a comfortable and effective level.
- Hydration: Ensure your skin is well-hydrated for better conductivity and comfort during use.
- Pad Placement: Experiment with different pad placements to find the most effective positions for your specific needs. Refer to general TENS/EMS pad placement guides if unsure.
- Regular Pad Replacement: Replace electrode pads regularly as their adhesive and conductive properties diminish over time, affecting performance.
Note: No specific user tips were available from provided reviews or Q&A content.
Warranty & Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.