coolo ZG-106Z

Contents

Zigbee Smart Light Sensor User Manual

Model: ZG-106Z

1. Introduction

Thank you for choosing the coolo Zigbee Smart Light Sensor. This device provides real-time illuminance (LUX) monitoring, enabling smart home automation based on ambient light levels. It integrates seamlessly with various Zigbee gateways and platforms, offering enhanced control over your home environment.

Zigbee Smart Illuminance Sensor with app showing 318 lux

Figure 1: Zigbee Smart Illuminance Sensor and its app interface.

2. Safety Information

  • Keep the device away from water and high humidity.
  • Do not attempt to disassemble or repair the device yourself.
  • Use only the specified battery type (CR2450).
  • Keep batteries out of reach of children.
  • Operate within the specified temperature and humidity ranges.

3. Package Contents

Please check the package for the following items:

  • Zigbee Smart Light Sensor (ZG-106Z)
  • User Manual
  • Mounting Base/Bracket (included with TYPE 3 and TYPE 4 versions)
Unboxing image showing sensor, manual, and base

Figure 2: Typical package contents.

4. Product Overview

The Zigbee Smart Light Sensor is a compact device designed for easy integration into your smart home system. It features a light-sensing surface, an indicator LED, and a pairing button.

Diagram of sensor components: pairing button, indicator light, light sensing surface

Figure 3: Sensor components (Pairing Button, Indicator Light, Light Sensing Surface).

4.1 Version Comparison

This sensor is available in four versions, each designed for specific smart home ecosystems. Please identify your version for correct setup and operation.

Table comparing 4 versions of the light sensor

Figure 4: Comparison of the four sensor versions.

Table 1: Sensor Version Details
FeatureTYPE 1 (Z2M Light Sensor)TYPE 2 (Tuya Light Sensor)TYPE 3 (Z2M Sensor with Stand)TYPE 4 (Tuya Sensor with Stand)
StyleSensor onlySensor onlySensor with StandSensor with Stand
Sensor TypeLight SensorLight SensorLight SensorLight Sensor
ProtocolZ2M (Zigbee2MQTT)Tuya ZigbeeZ2M (Zigbee2MQTT)Tuya Zigbee
Work WithMQTT only (No Smart Life/Tuya APP)Smart Life / TUYA APPMQTT only (No Smart Life/Tuya APP)Smart Life / TUYA APP
Work With GatewayNeeds Zigbee GatewayRequired Zigbee Tuya GatewayNeeds Zigbee GatewayRequired Zigbee Tuya Gateway
Bracket IncludedNoNoYesYes

Important Notes:

  • All versions require a Zigbee gateway (not included).
  • Z2M versions are NOT compatible with Smart Life / TUYA APP.
  • Tuya Zigbee versions require a Tuya Zigbee Gateway ONLY.

5. Specifications

Back of product box showing specifications

Figure 5: Product specifications as shown on the packaging.

Table 2: Technical Specifications
ParameterValue
Product NameZigbee Ambient Light Sensor
ModelZG-106Z
Wireless ProtocolZigbee 3.0
Detection Range0-157K Lux
Battery TypeCR2450 Button Battery
Working VoltageDC 3.0V
Standby Current<10uA
Working Temperature-10°C to 55°C
Working Humidity0% - 95% RH (non-condensing)
Product SizeΦ33 x 16mm

6. Setup Instructions

6.1 Battery Installation

  1. Gently twist the battery cover counter-clockwise to open it.
  2. Insert the CR2450 battery, ensuring correct polarity.
  3. If present, remove the battery insulation film.
  4. Align the cover and twist clockwise to secure it.

6.2 Mounting the Sensor

The sensor can be placed on a flat surface or mounted. For mounting:

  1. Choose a suitable location where light levels need to be monitored (e.g., wall, ceiling, shelf).
  2. If using the adhesive, clean the surface thoroughly. Remove the protective film from the adhesive on the back of the sensor or its base.
  3. Firmly press the sensor onto the desired location for a few seconds.
  4. If your version includes a stand, attach the sensor to the stand and place it on a flat surface.
Smart Light Sensor with stand on a wooden table

Figure 6: Sensor placed on a table with its stand.

6.3 Pairing with a Zigbee Gateway

Ensure your Zigbee gateway is powered on and in pairing mode before proceeding.

  1. Power on the sensor by installing the battery (if not already done).
  2. Press and hold the pairing button (located on the side/back of the sensor) for approximately 3-5 seconds.
  3. Release the button when the red indicator light starts flashing rapidly. This indicates the sensor is in pairing mode.
  4. Follow the instructions on your Zigbee gateway's app or interface to discover and add the new device.
  5. Once successfully paired, the indicator light will stop flashing, and the sensor will appear in your gateway's device list.

7. Operating Instructions

7.1 Real-time Brightness Monitoring

After successful pairing, you can view the current illuminance (LUX) readings from the sensor via your Zigbee gateway's application (e.g., Smart Life, Tuya Smart, Home Assistant). The sensor provides real-time updates on ambient light levels.

7.2 Smart Home Automation

Leverage the light sensor to create intelligent automation routines:

  • Lighting Control: Automatically turn on lights when the room gets dark (LUX falls below a set threshold) and turn them off when it's bright enough.
  • Curtain/Blind Control: Automatically open curtains at dawn or close them when it gets too bright.
  • Scene Activation: Trigger specific smart home scenes based on light conditions (e.g.,

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.