RPM 82mm Radial Brake Caliper Kit

Contents

RPM 220mm Disc Motorcycle Rear Brake Calipers Kit

Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your new RPM 220mm Disc Motorcycle Rear Brake Calipers Kit. This kit is designed to enhance the braking performance of compatible motorcycle models, including Yamaha BWS and Honda. Please read this manual thoroughly before attempting any installation or use.

For a visual overview of the product, please watch the following video:

Video: RPM Brake Kit Product Showcase

2. Warning & Safety Information

  • Motorcycle braking systems are critical safety components. Incorrect installation or maintenance can lead to serious injury or death.
  • Always ensure all components are securely installed and torqued to manufacturer specifications.
  • Before riding, perform a thorough functional test of the braking system.
  • If you are unsure about any part of the installation or maintenance process, seek assistance from a qualified motorcycle mechanic.
  • Do not operate the motorcycle with compromised or improperly functioning brakes.

3. Product Overview

The RPM 220mm Disc Motorcycle Rear Brake Calipers Kit includes the following components:

  • 1 x RPM Small Radiator Caliper (4-piston design)
  • 1 x 220mm Brake Disc (with 70mm installation hole-to-hole center)
  • 1 x Rear Bracket Adapter (Transfer Code)
  • Necessary mounting hardware (screws, washers, etc.)
Assortment of colored RPM brake calipers and a 220mm disc

Image: Various color options for RPM brake calipers and the 220mm brake disc.

Assortment of colored RPM brake calipers and rear bracket adapters

Image: Various color options for RPM brake calipers and their corresponding rear bracket adapters.

4. Specifications

4.1. Caliper Specifications

Technical drawing showing dimensions of the RPM 4-piston radial brake caliper

Image: Detailed dimensions of the RPM 4-piston radial brake caliper.

RPM 4-Piston Radial Brake Caliper Dimensions
Feature Measurement
Mounting Distance (Radial) 82mm
Overall Length 112mm
Overall Width 60mm
Overall Height 47mm
Bore Diameter φ10mm
Piston Diameter 25mm x 2

4.2. Brake Disc Specifications

Technical drawing showing dimensions and materials of the 220mm floating brake disc

Image: Detailed dimensions and material composition of the 220mm floating brake disc.

220mm Floating Brake Disc Dimensions & Materials
Feature Measurement/Material
Diameter 220mm
Brake Disc Fixing Hole (Center-to-Center) 70mm
Inner Diameter φ58mm
Offset 35mm
Minimum Thickness 3.0mm
Actual Thickness 4.0mm
Materials Aluminum Alloy, Stainless Steel, High-Carbon Steel

4.3. Rear Bracket Adapter Specifications

Technical drawing showing dimensions of the rear bracket adapter

Image: Detailed dimensions of the rear bracket adapter.

Rear Bracket Adapter Dimensions
Feature Measurement
Length 82mm
Bore Diameter φ20mm
Bushing Inner Diameter φ16mm

5. Installation

Installation of a motorcycle brake system requires mechanical expertise. If you are not confident in your abilities, please consult a professional mechanic.

  1. Preparation: Ensure the motorcycle is securely supported on a stand. Allow the existing braking system to cool down. Gather all necessary tools.
  2. Remove Old Components: Carefully remove the existing rear brake caliper, disc, and any associated brackets. Be mindful of brake fluid if disconnecting hydraulic lines.
  3. Install New Brake Disc: Mount the new 220mm brake disc onto the wheel hub, ensuring proper alignment with the fixing holes. Secure with appropriate fasteners, tightening to the manufacturer's specified torque.
  4. Install Rear Bracket Adapter: Attach the rear bracket adapter to the swingarm or designated mounting points on your motorcycle. Ensure it is correctly oriented and securely fastened.
  5. Mount Caliper: Position the RPM 4-piston caliper onto the rear bracket adapter, aligning it over the brake disc. Secure the caliper with the provided mounting hardware.
  6. Connect Brake Line: Connect the brake line to the new caliper. Ensure a tight, leak-free connection.
  7. Bleed Brake System: Thoroughly bleed the brake system to remove any air. This is a critical step for proper brake function. Follow standard brake bleeding procedures for your motorcycle.
  8. Final Inspection: Double-check all fasteners for tightness. Verify that the brake disc rotates freely without rubbing and that the brake lever/pedal provides firm, consistent pressure.
Red RPM brake caliper and disc installed on a motorcycle rear wheel

Image: Example of an installed RPM brake caliper and disc on a motorcycle.

6. Operation

After successful installation and bleeding, the brake system should operate smoothly. The RPM 4-piston caliper is designed for highly responsive and sensitive braking. Always test the brakes at low speeds in a safe environment before full operation.

  • Brake-in Period: New brake pads and discs require a break-in period. During this time, avoid hard braking. Gradually apply brakes to allow the pads to conform to the disc surface.
  • Brake Feel: The brake lever/pedal should feel firm and consistent. Any sponginess or excessive travel indicates air in the system or other issues that need immediate attention.
  • Regular Checks: Periodically check brake fluid levels, brake pad wear, and disc condition.

7. Maintenance

Proper maintenance ensures the longevity and safety of your braking system.

  • Regular Cleaning: Keep brake components clean from dirt, dust, and road grime. Use appropriate brake cleaner.
  • Fluid Checks: Regularly check brake fluid levels and condition. Replace brake fluid according to your motorcycle manufacturer's recommendations.
  • Pad Wear: Inspect brake pads for wear. Replace pads when they reach their minimum thickness limit.
  • Disc Condition: Check the brake disc for warping, cracks, or excessive wear. Replace if necessary.
  • Fastener Torque: Periodically check the torque of all mounting bolts for the caliper, disc, and bracket.
  • Avoid Contaminants: Prevent oil, grease, or other contaminants from coming into contact with brake pads or disc surfaces.

8. Troubleshooting

Common Brake System Issues
Problem Possible Cause Solution
Spongy Brake Lever/Pedal Air in the hydraulic system Bleed the brake system thoroughly.
Reduced Braking Performance Worn brake pads, contaminated pads/disc, low fluid, warped disc Inspect and replace worn components, clean contaminated parts, check fluid level.
Brake Squeal/Noise Contaminated pads/disc, worn pads, improper installation, loose components Clean brake components, replace pads, ensure proper installation and torque.
Brake Dragging/Sticking Sticking caliper pistons, contaminated fluid, warped disc Clean/rebuild caliper, flush fluid, inspect/replace disc.

9. User Tips

  • Compatibility Check: Always verify the compatibility of this brake kit with your specific motorcycle model (e.g., Yamaha BWS, Honda) before purchase and installation. Pay close attention to mounting points and disc dimensions.
  • Color Matching: The kit components are available in various colors. If you have specific color preferences not met by standard combinations, inquire about custom matching options.

10. Warranty & Support

Defective products may be returned or exchanged within 7 days of receipt. Please contact your seller for specific return and exchange procedures.

For additional information and documents, you may refer to the official user manual PDF:

View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.