Introduction
The ANTUSI Q3 Smart Bicycle Taillight is designed to enhance cycling safety with its intelligent sensing capabilities, including automatic brake detection and light adjustment. Featuring a durable aluminum alloy body and IPX6 waterproofing, it is suitable for various riding conditions. This manual provides essential information for the proper installation, operation, and maintenance of your Q3 taillight.
Safety Information
- Always ensure the taillight is securely mounted before riding.
- Do not look directly into the light when it is on, as it may cause temporary vision impairment.
- Keep the device away from children.
- Do not disassemble or modify the taillight, as this may void the warranty and pose a safety risk.
- Ensure the USB charging port cover is properly sealed after charging to maintain waterproof integrity.
Package Contents
Please check the package for the following items:
- ANTUSI Q3 Smart Taillight
- Saddle Bracket
- Seatpost Bracket
- USB Charging Cable (30cm)
- User Manual (this document)
Setup
1. Charging the Taillight
- Locate the USB charging port on the taillight.
- Connect the provided USB charging cable to the taillight and to a 5V USB power source (e.g., computer USB port, mobile USB charger, or 5V adapter).
- The indicator light will show charging status (e.g., blue light for charging, off when fully charged).
- Ensure the charging port cover is securely closed after charging to maintain waterproof performance.
2. Mounting the Taillight
The Q3 taillight offers two mounting options: saddle bracket and seatpost bracket.
Saddle Bracket Installation:
- Attach the saddle bracket to the rails under your bicycle saddle.
- Secure the bracket firmly using the provided fasteners.
- Slide the Q3 taillight onto the saddle bracket until it clicks into place.
Seatpost Bracket Installation:
- Wrap the seatpost bracket around your bicycle's seatpost.
- Secure the bracket tightly with the provided strap or fasteners.
- Slide the Q3 taillight onto the seatpost bracket until it clicks into place.
Ensure the taillight is facing directly backward and is not obstructed by other bicycle components or rider's clothing.
Operating Instructions
Power On/Off
- Power On: Press and hold the power button for approximately 2 seconds until the light illuminates.
- Power Off: Press and hold the power button for approximately 2 seconds until the light turns off.
Changing Lighting Modes
Once powered on, short press the power button to cycle through the available lighting modes. The Q3 supports 2-4 different lighting files/modes, which may include steady, flashing, and intelligent modes. Refer to the specific product packaging for the exact sequence of modes.
Intelligent Sensing Features
- Brake Sensing: The taillight is equipped with an intelligent sensor that detects braking. When braking is detected, the light will automatically brighten significantly to alert following traffic.
- Auto Sensing Light: In certain intelligent modes, the taillight can automatically adjust its brightness or turn on/off based on ambient light conditions and motion.
Waterproof Performance
The ANTUSI Q3 taillight features an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. This allows for reliable operation in rainy and snowy conditions.
Maintenance
- Cleaning: Wipe the taillight with a soft, damp cloth to remove dirt and dust. Do not use abrasive cleaners or solvents.
- Charging: Recharge the battery regularly, especially if the light has not been used for an extended period, to prolong battery life.
- Storage: Store the taillight in a cool, dry place when not in use.
- Waterproof Seal: Periodically check the rubber seal around the charging port to ensure it is intact and free from debris.
Troubleshooting
- Light not turning on: Ensure the battery is charged. Press and hold the power button for 2 seconds to power on.
- Brake sensing not working: Check if the taillight is securely mounted and oriented correctly. Ensure it is in an intelligent mode that supports brake sensing.
- Short battery life: Ensure the battery is fully charged before use. Operating in high-brightness or continuous modes will consume battery faster than flashing modes.
- Water ingress: If water enters the device, immediately power it off and allow it to dry completely. Contact customer support if issues persist.
Specifications
| Feature | Specification |
|---|---|
| Model | Q3 |
| Size | 30*34*34mm |
| Body Material | Aluminum alloy and plastic |
| Weight | 33g (including saddle bracket) |
| Waterproof Level | IPX6 |
| Intelligent Sensing | Yes (Brake sensing, Auto sensing light) |
| Support Dimmer | 2 - 4 Files (Lighting Modes) |
| Use Time | 12-30 hours (depending on mode) |
| Built-in Battery | 3.7V 300 mA polymer battery |
| USB Charging Cable | 30cm 2A |
| Charging Method | 5V adapter, computer USB, mobile USB charger |
| Working Temperature | -10 to 60℃ |
| Origin | Mainland China |
User Tips
- For optimal brake sensing, ensure the taillight is mounted vertically and securely, minimizing vibrations that could trigger false positives.
- If using the auto-sensing mode, be aware that the light may turn off in well-lit areas to conserve battery. Manually switch to a constant mode if continuous visibility is desired regardless of ambient light.
- Regularly check the mounting bracket for tightness, especially after riding on rough terrain, to prevent the light from falling off.
Warranty and Support
For warranty claims or technical support, please contact the retailer or manufacturer directly. Keep your proof of purchase for any warranty-related inquiries.