Introduction
Thank you for choosing the Redragon K762 Wireless Gasket Gaming Keyboard. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new keyboard. Please read it carefully to ensure optimal performance and longevity of your device.
The Redragon K762 is a 104-key mechanical keyboard featuring a gasket-mounted design, a 1.14-inch TFT LCD smart screen, and versatile tri-mode connectivity (USB-C wired, Bluetooth 3.0/5.0, and 2.4Ghz wireless). It is designed to provide a comfortable and responsive typing experience for both gaming and productivity.
Important Safety Guidelines
- Charging Input: Ensure the charging input is 5V-2A maximum. Using an incompatible charger may damage the device.
- Battery Safety: Do NOT replace the battery with a different model. Do NOT use this product if the battery shows signs of damage (tearing, deformation, leakage, or electrolytic material smell). If material is leaking, seek immediate medical attention if it contacts skin or eyes. Do NOT expose the battery to liquid, heat sources, or non-standard operating conditions. Do NOT remove the battery except for proper disposal and recycling as required by local laws. Do NOT impact, bend, alter, disassemble, or otherwise damage the battery.
- Liquid Spills: In case of a liquid spill, immediately unplug the keyboard's USB cable from the computer. Wipe off excess liquid and place the keyboard in a dry, well-ventilated area. Ensure the keyboard is completely dry before using it again.
- Disassembly: Do not attempt to disassemble or modify the keyboard. Unauthorized disassembly voids the warranty.
Package Contents
The package should contain the following items:
- Redragon K762 Wireless Gasket Gaming Keyboard
- USB-C Cable
- 2.4G Wireless Receiver (USB dongle)
- Keycap Puller
- Switch Puller
- Spare Switches
- User Manual (this document)

Product Overview
The Redragon K762 keyboard features a full 104-key layout with a gasket-mounted design for a softer typing feel and reduced noise. It includes a 1.14-inch TFT LCD smart screen and a multi-function knob for easy control.

Key Features:
- Smart Info-Island Screen: A 1.14-inch TFT screen displaying keyboard information, connection mode, battery level, typing status, and customizable GIF memes.
- Gasket Design: Precision-locked covers with gaskets reduce noise and provide a softer, more consistent typing experience.
- 3-Mode Connection: Supports USB-C wired, Bluetooth 3.0/5.0, and 2.4Ghz wireless connectivity.
- Custom Mint Mambo Switches: Thick-lubed linear switches for a silky, creamy, and comfortable typing feedback. The hot-swap sockets are compatible with most 3/5-pin switches.
- 5-Layer Noise Dampening: Equipped with 3.5mm PO foam, IXPE switch foam, PET sound pad, bottom socket foam, and a silicone bottom pad to significantly reduce hollow noise.
- One-Knob Control: An easy-access knob for adjusting backlight brightness and media controls (volume, play/pause, switch).
- Pro Software Supported: Customizable modes, effects, macros, and key redefinitions via Redragon software.
- 4000mAh Battery: Long-lasting battery for extended wireless use.



Setup Instructions
The Redragon K762 keyboard supports Windows (XP/Vista/7/8/10/11) and Mac operating systems.
1. Wired Connection
To connect via USB-C cable:
- Ensure the 2.4G/OFF/BT switch on the keyboard is set to "OFF".
- Connect the USB-C cable to the keyboard and the other end to a USB port on your computer.
- The computer will automatically recognize and configure the keyboard.
2. 2.4G Wireless Connection
To connect using the 2.4G wireless receiver:
- Set the 2.4G/OFF/BT switch on the keyboard to "2.4G". The RGB light bar will flash yellow, and the screen will show "2.4G Linking".
- Plug the USB receiver into an available USB port on your computer.
- The keyboard will automatically connect with your computer. The RGB light bar will turn to the current lighting mode once paired.
- If auto-connection fails or you wish to connect to a new device, unplug the USB receiver. Press and hold
FN + (4)for 3 seconds. The RGB light bar will flash yellow quickly, and the screen will show "2.4G Pairing". Plug the USB receiver into your computer's USB port. After successful pairing, the RGB light bar will return to the current lighting mode.

3. Bluetooth Connection
To connect via Bluetooth:
- Set the 2.4G/OFF/BT switch on the keyboard to "BT".
- Press
FN + 1,FN + 2, orFN + 3to select a corresponding Bluetooth channel. The light bar will flash blue (BT1), green (BT2), or cyan (BT3) quickly, and the screen will show "BT1/2/3 Pairing". - On your device (computer, tablet, etc.), turn on Bluetooth and search for available devices. Select the device name "BT 5.0 KB" to pair.
- Once paired, the indicator light will turn steady.
- To switch between paired Bluetooth devices (BT1, BT2, BT3), press
FN + 1,FN + 2, orFN + 3. - To re-pair a channel or connect to a new device, press and hold
FN + [1/2/3]for 3 seconds until the RGB light bar flashes quickly, then repeat steps 3-4.
Operating Instructions
FN Key Combinations
The keyboard features various functions accessible via the FN key. Some functions differ between Windows and Mac operating systems.
| Key Combination | Windows Function | Mac Function |
|---|---|---|
FN + F1 | Screen brightness - | Screen brightness - |
FN + F2 | Screen brightness + | Screen brightness + |
FN + F3 | Multiple windows | Multiple tasks |
FN + F4 | Speech recognition (Win10+) | Siri |
FN + F5 | Show desktop | Show desktop |
FN + F6 | Search | Search |
FN + F7 | Previous track | Previous track |
FN + F8 | Play/Pause | Play/Pause |
FN + F9 | Next track | Next track |
FN + F10 | Mute | Mute |
FN + F11 | Volume - | Volume - |
FN + F12 | Volume + | Volume + |
FN + WIN | Lock/Unlock WIN key | Do NOT lock WIN key on MAC OS |
FN + INS | Cycle through 15 default backlight patterns | Cycle through 15 default backlight patterns |
FN + <- | Adjust backlight color (limited patterns) | Adjust backlight color (limited patterns) |
FN + ↑ | Adjust backlight brightness + (6 levels) | Adjust backlight brightness + (6 levels) |
FN + ↓ | Adjust backlight brightness - (6 levels) | Adjust backlight brightness - (6 levels) |
FN + >- | Adjust light rotating speed (5 levels) | Adjust light rotating speed (5 levels) |
FN + HOME | Cycle through 4 RGB light bar modes | Cycle through 4 RGB light bar modes |
FN + PGDN | Adjust RGB light bar color (limited modes) | Adjust RGB light bar color (limited modes) |
Backlight DIY Mode
To customize your backlight:
- Press
FN + BACKSPACEto enter DIY mode. The keysESC,A,S,D,W,I,J,K,L,↑,↓,<-,>-will light up by default. - Press
FN + BACKSPACEagain to enter gaming mode. - Press
FN + BACKSPACEa third time to start recording. Continuously press the desired key to select its color. - Once key light color settings are completed, press
FN + BACKSPACEto save.


Knob & LCD Screen Functions
The multi-function knob and 1.14-inch TFT LCD smart screen provide intuitive control over various settings.


By default, turning the knob adjusts the volume. Press the knob button to enter the LCD screen menu. Rotate the knob to select function options, and press it again to enter the relevant function. If left idle for over 1 minute, the menu will automatically exit.
LCD screen options include:
- Home: Displays current date, time, battery level, and connection status.
- GIF/Image Display: Customize with GIF memes.
- Effect: Backlight pattern.
- Color: Backlight color.
- Brightness: Backlight brightness.
- Speed: Backlight speed.
- Language: CN/EN.
- Time format: 12H/24H.
- Time set: Set date and time on screen.
- Return: Go back to the previous menu.
To set the date and time:
- Enter the time set menu.
- The screen will show the current date and time. Rotate the knob left/right to select numbers. Press the knob to confirm and move to the next position.
- After confirming the time, it will jump to the save step. Press the knob to exit and return to the main interface.
Power Save Mode & Recharging
In wireless/Bluetooth mode, if the keyboard is idle for over 3 minutes, the backlight will turn off to save battery. If idle for over 30 minutes, the keyboard will enter power save mode. Press any key to wake it up.
When connected to a computer or charging adapter in 2.4G wireless/Bluetooth mode, the keyboard will charge. The RGB light bar will light red while charging.
To check the battery level, press and hold FN + ~. The backlight will light up on keys 1-0. Keys 1-3 will display red, and keys above 3 will display green, indicating the current battery level. Release FN + ~ to return to the current light mode. (Battery level query is only supported in wireless mode).
Pro Software Support
Expand your customization options using the Redragon software. This software allows you to design new modes, effects, macros with different keybindings, and shortcuts for more efficient work and gaming. The on-screen time will auto-sync with your PC's system time upon the software's initial launch.

Maintenance
Cleaning
To clean your keyboard:
- Disconnect the keyboard from your computer before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the surface of the keyboard.
- For dust and debris between keycaps, use compressed air or a small brush.
- Do not use harsh chemicals, solvents, or abrasive cleaners, as these may damage the keyboard's finish.
Keycap and Switch Replacement
The K762 features hot-swappable switches, allowing for easy replacement without soldering.
- Use the provided keycap puller to gently remove keycaps.
- Use the provided switch puller to carefully remove switches. Grip the switch firmly and pull straight up.
- When inserting new switches, ensure the pins are aligned with the sockets and press down gently until the switch clicks into place.
- Replace keycaps by aligning them with the switch stem and pressing down.
Troubleshooting
Keyboard Not Responding
- Check if the keyboard's USB cable is correctly inserted into the computer's USB port. Try a different USB port.
- Ensure the keyboard is powered on and in the correct connection mode (Wired, 2.4G, or BT).
- If using 2.4G wireless, ensure the USB receiver is properly plugged in and the keyboard is paired.
- If using Bluetooth, ensure the keyboard is paired to the correct channel (BT1/2/3) and your device's Bluetooth is enabled.
- Try restarting your computer.
Backlight Issues
- If the backlight is off, check the brightness level using
FN + ↑. - Ensure the keyboard is not in power save mode. Press any key to wake it up.
- If the keyboard is charging, the light bar will be red. It will return to normal lighting after charging.
Restoring Factory Settings
To restore the keyboard to its factory default settings, press and hold FN + ESC for 3 seconds.
Specifications
| Feature | Description |
|---|---|
| Model | K762 (HL-K762WP-RGB-PRO/7515) |
| Keyboard Standard | 104 Keys (Full Size) |
| Operation Style | Mechanical (Custom Mint Mambo Linear Switches) |
| Switches Hot Swap | Yes (3/5 Pins Compatible) |
| Interface Type | USB-C (Wired), 2.4Ghz Wireless, Bluetooth 3.0/5.0 |
| Battery | 4000mAh (Included) |
| LCD Screen | 1.14-inch TFT Info-Island Screen |
| Backlight | RGB (18 preset, 10 music-sync, software definable) |
| Noise Dampening | 5-Layer (3.5mm PO foam, IXPE switch foam, PET sound pad, bottom socket foam, silicone bottom pad) |
| Application | Desktop, Laptop, Number, Tablet |
| Language | English |
| Wrist Support | No |
| Dimensions (Keyboard) | Approx. 17.5 inches (Length) x 5.2 inches (Width) |
| Package Dimensions | 45 cm (Length) x 18 cm (Width) x 4 cm (Height) |
| Package Weight | 1.35 kg |
| Origin | Mainland China |
User Tips
- Packaging: While the product itself is well-protected, if you plan to transport or store the keyboard, consider adding extra cushioning to the original box for enhanced protection.
- Initial Impression: Users have noted the keyboard's good build quality and appealing aesthetics upon arrival.
- Protective Film: Remember to remove any protective film from the LCD screen before use for optimal clarity.

Warranty and Support
Warranty Rules
Within the guaranty period, repair is guaranteed for failures due to electrical circuit problems. This warranty does not cover:
- Man-made damages, such as disassembly, hard impacts, submersion into water, plugging into improper current or voltage.
- Damage caused by natural disasters such as fire, flood, or earthquake.
- Consumable parts (e.g., foot sticks) and spare parts replacement.
For further support or warranty claims, please contact Redragon customer service.
A PDF version of this user manual is available for download from the seller's product page or by clicking here.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.