1. Product Overview
The LIWBET WL-TC series wall toggle switch features a minimalist design with a durable stainless steel panel. It is designed for controlling lighting and various electrical outlets in residential and commercial settings. Available in multiple configurations including 1-gang, 2-gang, 3-gang, 4-gang, 2-way, 3-way, dimmer, and various socket types.

Figure 1: LIWBET WL-TC Wall Toggle Switch (Side View)
2. Safety Instructions
- Before installation, always turn off the main power supply and confirm that the circuit is not live to avoid the risk of electric shock.
- Strictly follow the wiring labels when connecting wires to prevent incorrect wiring, which may cause switch damage or circuit failure.
- If you do not have electrical knowledge, it is recommended to hire a professional electrician to ensure safety and proper operation.
- This device operates at high voltage (above 50Vac or 75Vdc). Exercise extreme caution during installation and maintenance.
3. Installation Guide
3.1. Step-by-Step Installation
- Pry Open Panel: Use a flathead screwdriver to gently pry open the panel from the side slot.
- Remove Front Panel: Carefully remove the front panel to expose the switch mechanism.
- Disconnect Power & Connect Wires: Ensure power is OFF. Connect the electrical wires according to the appropriate wiring diagram for your switch type (refer to Section 3.2).
- Place Switch in Wall Box: Insert the switch mechanism into the standard square wall back box and secure it with screws.
- Install Front Panel: Attach the front panel back onto the switch mechanism and ensure it is level and securely fitted.

Figure 2: Installation Instructions
3.2. Wiring Diagrams
Refer to the following diagrams for correct wiring based on your specific switch or socket configuration. Always ensure power is off before handling wires.

Figure 3: Comprehensive Wiring Diagrams
- 1 Gang 2 Way: Connects one light from two locations.
- 1 Gang 3 Way: Connects one light from three locations.
- 2 Gang 2 Way: Controls two separate lights from two locations each.
- 3 Gang 2 Way: Controls three separate lights from two locations each.
- 4 Gang 2 Way: Controls four separate lights from two locations each.
- Dimmer Switch: For controlling light intensity.
- EU Socket: Standard European power outlet wiring.
- France Socket: Standard French power outlet wiring.
4. Operating Instructions
The LIWBET WL-TC toggle switch operates by a simple up/down motion to control the connected electrical circuit. For dimmer switches, rotate or slide the toggle (depending on design) to adjust light intensity. For socket modules, simply plug in your device.
- On/Off Function: Push the toggle up or down to switch the connected light or appliance on or off.
- Multi-Way Switching: In 2-way or 3-way configurations, the light can be controlled from multiple switch locations.
- Dimming: For dimmer models, adjust the toggle to achieve the desired light level.
5. Maintenance
To ensure the longevity and appearance of your LIWBET WL-TC switch:
- Cleaning: Wipe the stainless steel panel with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Inspection: Periodically check for any loose connections or damage. If any issues are found, consult a qualified electrician.
6. Troubleshooting
If you encounter issues with your switch, consider the following common troubleshooting steps:
- Light/Appliance Not Working:
- Check if the main power supply to the circuit is on.
- Verify that the bulb or appliance connected to the switch is functional.
- Ensure all wiring connections are secure and correctly installed according to the wiring diagrams (refer to Section 3.2).
- If it's a multi-way switch, ensure all switches in the circuit are functioning correctly.
- Switch Feels Loose:
- Ensure the mounting screws securing the switch to the wall box are tightened.
- Ensure the front panel is securely clipped into place.
If the problem persists after these checks, it is recommended to consult a qualified electrician.
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | LIWBET |
| Model Number | WL-TC |
| Switch Type | Toggle Switch |
| Material | Stainless steel |
| Size | 86*86mm |
| EU LVD Voltage | High voltage: Above 50Vac or 75Vdc |
| Is Smart Device | No |
| Certification | RoHS, CE |
| Origin | Mainland China |
| Used for | Lamp (and other compatible electrical loads) |
7.1. Package Dimensions and Weight
- Length: 17 cm
- Width: 9 cm
- Height: 11 cm
- Weight: 0.3 kg
8. User Tips
No specific user tips were available from the provided data (reviews or Q&A content).
9. Warranty and Support
This LIWBET WL-TC Wall Toggle Switch comes with a 10-year warranty from the date of purchase.
For technical support, warranty claims, or further assistance, please contact your retailer or the manufacturer directly. Please have your model number (WL-TC) and purchase details ready when contacting support.
A detailed user manual in PDF format may also be available from the seller or manufacturer.