1. Product Overview
The E-ACE 10-inch 4K Mirror Dash Cam (Model A54) utilizes two wide-angle cameras, installed both inside and outside the vehicle, to capture real-time images of the surrounding area. This system transmits the captured footage to the integrated device, allowing the driver to intuitively view obstacles and pedestrians. This feature significantly reduces the risk of scraping, collision, and other accidents. The product records all driving footage to provide evidence in case of an accident.






2. Package Contents
Please check the box for the following items:

- 1 x DVR Mirror-A54
- 1 x Power charger (Car charger)
- 1 x Aux Cable
- 1 x Instructions (User Manual)
- 2 x Bandages (Fixed bandage)
- 1 x USB Card Reader (Gift)
3. Specifications
| Feature | Specification |
|---|---|
| Model | Carplay (A54) |
| Master Control | High performance SOC |
| Wireless Function | Wireless Apple CarPlay, Wireless Android Auto |
| Screen | IPS material, Built-in Screen, Touch Screen, 16:9 Screen Ratio |
| Storage | SD card support up to 256GB (Class 10 required) |
| Wireless Module | WiFi, Bluetooth, FM launch module |
| Rear Camera | Support |
| Horn | 2 W speaker |
| FM Emission | Supported frequency band: 88MHz-108MHz |
| Reversing Video | Automatic reversing video display |
| Working Voltage | 7V-32V |
| Power | Less than 10W |
| Material | ABS/PC |
| Power Source | Corded Electric |
| Loop-Cycle Recording | Yes |
| Audio Recorded | Yes |
| Maximum Video Frame Rate | 30 FPS |
| NightShot Function | Yes |
| View Angle | 170° |
| Camera Resolution | 3840x2160 (4K) |
| Video Code | H.264 |
| Special Features | G-Sensor, Display Rotate, SD/MMC Card, With Rearview Mirror, Anti Surge Voltage Impact, Anti Fog, Anti Vibration, Real Time Surveillance, Automatic White Balance, Wide Dynamic Range, WiFi Function, Bluetooth, Parking Monitor, External GPS |
| Number Of Lenses | 2 |
| Pixels | 1200Mega |
| OSD Language | Albanian, Arabic, Armenian, Belarusian, Bulgarian, Chinese (Simplified), Danish, English, Finnish, French, Hebrew, Japanese, Latin, Polish, Russian, Spanish, Thai, Turkish, Vietnamese, Welsh |
| GPS Logger | External |
| Battery | Built-In |
| Assembly Mode | Rearview Mirror |
| Chipset Manufacturer | Allwinner |
| Item Type | Car DVR |
4. Setup and Installation
4.1. Wiring Instructions
Follow these steps to properly wire your E-ACE Mirror Dash Cam:
- Connect the power charger (car charger) to the Type-C interface on the monitor.
- Plug the car charger into your vehicle's cigarette lighter socket.

Important Note:
- The product comes with a standard cigarette charger. Using a non-original or non-compliant high-quality cigarette charger may damage the device or cause other issues due to insufficient voltage or heat.
- The FM Transmitter function will not work correctly if the original charger is not used.
4.2. Camera Installation (Rear Camera Optional)
If your version includes a rear camera, follow these steps for installation:
- Locate an appropriate installation position for the rear camera, typically near the license plate.
- Mark the drilling hole with a pen and drill a screw hole of the appropriate size.
- Fix the camera to the rear of the car using screws.
- Connect the reversing trigger wire (red thin wire) to the positive pole of your vehicle's reversing light.
- Connect the camera extension cable to the monitor.
(Note: If you chose a version without the reversing camera, steps 3-5 are not necessary.)

4.3. Mounting the Mirror Dash Cam
The dash cam is designed to be mounted over your existing rearview mirror using the provided bandages.
5. Operating Instructions
5.1. General Interface Overview
The main interface displays the current time and date, along with various function icons. The device features a graphical menu for easy operation.

Key interface elements:
- Time and Date: Displays the current time and date.
- Home button: Click to return to the home page.
- Brightness button: Click to adjust screen brightness.
- Volume button: Click to adjust the volume.
- Settings button: Click to jump to the settings interface.
- CarPlay: Special connector for iPhone.
- Android Auto: Special connector for Android mobile phone.
- Car Record: Click to enter the video recording interface.
- Playback: Tap to view a video on the video screen.
- Audio Out: When turned on, the device will transmit sound to the original vehicle's audio system.
5.2. CarPlay (For iPhone)
To use CarPlay:
- On the dash cam, click the [CarPlay] button.
- On your iPhone, turn on Wi-Fi and Bluetooth.
- On the dash cam, select the [CarPlay] option, then click [BT Manage].
- Connect your iPhone via Bluetooth to the device (look for device name like 'F900_941D724C').
- Once connected, you can open CarPlay applications on the dash cam screen.
The device will attempt to automatically connect to the last paired phone when powered on.
Note: CarPlay functionality is exclusively for iPhone devices. For Android phones, please use the Android Auto option.
To disconnect CarPlay, you must first turn off Bluetooth on your iPhone, then turn off Wi-Fi. If only Wi-Fi is turned off, the dash cam will continuously attempt to reconnect.
5.3. Android Auto (For Android Phone)
To use Android Auto:
- On the dash cam, click the [Android Auto] button.
- On your Android phone, turn on Wi-Fi and Bluetooth.
- On the dash cam, select the [Android Auto] option, then click [BT Manage].
- Connect your Android phone via Bluetooth to the device.
- Once connected, you can open Android Auto applications on the dash cam screen.
The device will attempt to automatically connect to the last paired phone when powered on.
Note: Android phones must be running Android version 11 or higher. You must also download and install the official 'Android Auto' application from the Google Play Store. Downloads from other sources may not function correctly.
To disconnect Android Auto, you must turn off Bluetooth on your Android phone. Turning off only Wi-Fi will cause the dash cam to continuously attempt to reconnect.
5.4. Bluetooth Music
To play music via Bluetooth:
- Access the BT Music function through either the CarPlay or Android Auto interface.
- Ensure Bluetooth is enabled on your mobile phone.
- On the dash cam, select [BT Music] and then click [BT Manage] to connect to your phone.
- Once connected, you can start playing music from your phone.
The control buttons on the screen correspond to Last Track, Play/Pause, and Next Track. You can also click the Lyrics button to display lyrics (if supported by your music player app) and the Dvr screen button to enter the recording interface.
5.5. Car Record
The main interface does not display the camera image directly. To view the camera feed and access recording functions:
- Click the [Car Record] button.
- When an SD card is inserted, the system automatically enters video recording mode. A small red dot on the [Car Record] button will flash to indicate recording is active.
Recording controls:
- Start/Stop Recording: Click to start or stop recording.
- Lock Video: Locks the current video segment (typically a few minutes) to prevent it from being overwritten.
- Take Photo: Captures a still image.
- View Playback: Access recorded videos.
- Audio On/Off: Toggles recording audio.
- Switch Camera: Switches between front and rear camera views.
5.6. Playback
To view recorded videos:
- Click the [Playback] button from the main interface.
- The playback interface will show a list of recorded files.
- Click any file on the left to play it on the right side of the screen.
Playback icons:
- Front Camera Cyclic Video: Indicates a cyclic video recorded by the front camera.
- Rear Camera Circular Video: Indicates a circular video recorded by the rear camera.
- Locked Video: Indicates a video saved after being locked.
- Photo View: Click to view pictures taken with the one-click photo function.
- Delete: Click to delete selected files.
5.7. Audio Out (FM Transmitter)
The FM Transmitter function allows the dash cam's audio to be played through your car's stereo system.
- Click the [Audio Out] button.
- Select the desired FM frequency band to be emitted (e.g., FM 88.0 MHz).
- Tune your car radio to the matched FM frequency.
Once connected, all audio from the dash cam will be transmitted to your car's original speakers. When Audio Out is active, the dash cam's monitor will not emit sound. You must turn off Audio Out or match the frequency to your car's stereo to hear sound.
Important: Not using the original power cord may cause the Audio Out signal to deteriorate or prevent the function from working.
5.8. Settings
To access the settings menu, click the settings button (gear icon) in the lower left corner of the interface.
Available settings include:
- Resolution: Adjust video resolution (1080P, 2.2K, 3.4K). Options may vary by model.
- Recording Time: Set video segment duration (1, 3, or 5 minutes). Default is 1 minute.
- Recording: Enable or disable recording.
- Pull Mirror Back: Adjust mirror display settings for flexible camera installation.
- Screen Saver: Set screen saver activation time (off, 1, 2, or 3 minutes). The system will run without corresponding time if set to 1 or 5 minutes. Press the power button to wake the screen.
- Voice Control: Enable voice commands (e.g., "show front camera", "show rear camera", "turn on display", "turn off display", "show all cameras").
- Driving Position: Select left or right-hand drive.
- Reverse Line Calibration: Adjust the reversing auxiliary lines. Park the car in the middle of a parking space and manually drag the lines on the screen to align them with the ground. Click 'Back' to confirm.
- Language: Select OSD language.
- Time Setting: Set year, month, day, time, minute, and second.
- Format: Formats the inserted SD card. It is recommended to format the SD card regularly on the device itself for optimal performance.
- Restore Factory Settings: Resets all settings to their initial state.
- Firmware Version: Displays the current firmware version.
- CarPlay/Auto Screen Mode: Select half-screen or full-screen mode for CarPlay/Android Auto.
6. Maintenance
6.1. SD Card Specifications
The quality of the SD card significantly impacts video recording stability. To ensure reliable recording, use SD cards from major brands such as SanDisk, Kingston, Toshiba, and Samsung. The speed certification must be at least Class 10.

Important: Do not format the SD card externally before inserting it into the device. Always format the SD card using the device's built-in format function for best compatibility and performance.
7. Troubleshooting
| Problem | Solution |
|---|---|
| Unable to start / Carplay supports 7V-32V car use, high voltage cannot be used |
|
| No touch phenomenon |
|
| The rear view camera has no image |
|
| Machine heat, jam phenomenon |
|
| CarPlay cannot connect |
|
| Android Auto cannot connect |
|
| The Bluetooth music is not working | Please set the screen casting mode to Bluetooth music. Other modes may not support Bluetooth music. |
Reminder: Please ensure that there is no obstruction between the mobile phone and the device, and that the Wi-Fi / Bluetooth signal communication is smooth, otherwise the product functions cannot be used smoothly.
8. User Tips
- This device has been successfully installed and used in a Tesla Model S.
- Always format your SD card directly on the device after insertion, rather than externally, to ensure proper functionality.
- If Android Auto location settings are not saving, disconnect your phone and set them up again.
- For technical inquiries, it is often more effective to contact the seller directly rather than general support channels.
9. Warranty and Support
This product comes with a 365-day warranty.
For further assistance or detailed instructions, you can refer to the official user manual PDF:
For any technical issues or support, please contact the seller directly using the contact information provided with your product.