DiFang 15MP 4G AOV Wireless Solar Camera User Manual

1. Introduction

Thank you for choosing the DiFang 15MP 4G AOV Wireless Solar Camera. This advanced security camera system features a triple-lens, three-sensor, and three-screen design, providing comprehensive and multi-angle surveillance. Powered by dual solar panels and a high-capacity battery, it offers continuous operation without the need for external power wiring. This manual provides detailed instructions for setting up, operating, and maintaining your camera system.

Figure 1: DiFang 15MP 4G AOV Wireless Solar Camera

2. Safety Information

⚠️ Disclaimer: Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

Always ensure the camera is installed securely to prevent accidental falls. Do not attempt to disassemble or modify the device, as this may void the warranty and pose safety risks. Keep the device away from extreme temperatures, direct sunlight for prolonged periods (beyond normal operation), and corrosive substances.

3. Package Contents

Verify that all items are present in your package:

• DiFang 15MP 4G AOV Wireless Solar Camera Unit (with three lenses)
• Dual Solar Panels (7W each, total 14W)
• Mounting Bracket and Screws
• User Manual (PDF available for download: User Manual PDF)
• (Optional, depending on purchase) TF Card (e.g., 32G, 64G, 128G, 256G SD card)

4. Product Overview

The DiFang 15MP 4G AOV Wireless Solar Camera is designed for outdoor surveillance, featuring multiple lenses for wide coverage and advanced AI capabilities.

4.1 Key Features:

• Triple Lens & Three Screen Design: Provides 3-screen simultaneous monitoring for a comprehensive view.
• 8K Resolution: Each lens is 5MP, combining for an 8K equivalent image (5MP+5MP+5MP).
• 4G Connectivity: Supports 4G SIM card connection (does not support 2.4Ghz or 5Ghz WiFi).
• Solar Powered: Dual 7W solar panels and a 12000mAh high-density battery for continuous power.
• PTZ Control: The bottom lens offers Pan 0~355° and Tilt 0~90° via the app. The two bullet cameras support manual 180° horizontal and vertical adjustment.
• AOV 24/7 Recording: AI-powered adaptive power management for continuous surveillance with minimal energy consumption.
• Night Vision: Full-color night vision and black & white infrared night vision with fill lights.
• Two-Way Audio: Built-in microphone and speaker for real-time communication.
• AI Detection: Humanoid detection, vehicle detection, pet detection, and automatic tracking.
• IP66 Waterproof: Durable and weatherproof design for harsh environments.
• Storage: Supports TF card storage (up to 256GB) and cloud storage (paid subscription).

4.2 Component Identification:

Figure 2: Product Component Diagram

• Solar Panels: Two panels for continuous charging.
• Antenna: For 4G signal reception.
• Speaker: For two-way audio and alarms.
• Lenses: Three camera lenses for multi-angle viewing.
• Infrared/White Light 2-in-1: Provides illumination for night vision.
• TF Card Slot: For local storage.
• Reset Button: Located near the TF card slot (refer to diagram).

5. Setup Guide

5.1 Important Note on 4G Connectivity

This camera is the 4G version and only supports 4G SIM card connection. It does not support 2.4Ghz or 5Ghz WiFi connections. Ensure your 4G SIM card is active and has an internet plan. The camera supports the following frequency bands:

b1 b3 b7 b8 b20 b38 b40 b42 b43

Before purchasing or setting up, please verify that your country's 4G frequency bands are supported by this device.

Figure 3: 4G Camera Version - SIM Card Required, No WiFi

5.2 App Download and Account Registration

1. Download the O-KAM PRO App: Scan the QR code below or search for "O-KAM PRO" in your mobile app store (App Store for iOS, Google Play for Android).


Figure 4: O-KAM PRO App Download

2. Register and Log In: Open the O-KAM PRO app. If you are a new user, register for an account using your email or phone number. If you already have an account, simply log in.

5.3 Inserting the SIM Card and TF Card

1. Ensure the camera is powered off.
2. Locate the SIM card slot and TF card slot (refer to Figure 2).
3. Carefully insert an active 4G SIM card into the SIM card slot.
4. Insert a compatible TF card (up to 256GB) into the TF card slot for local storage.
5. Power on the camera. You should hear voice prompts indicating "4G module is successfully started" and "SIM detection successful, network connection is successful."

5.4 Adding Device to App

There are two primary methods to add your camera to the O-KAM PRO app:

1. Method 1: Scan QR Code on Camera Label
   • Open the O-KAM PRO app.
   • Tap the "+" icon in the upper right corner to add a device.
   • Select the option to scan a QR code.
   • Scan the QR code located on the camera label.
   • Follow the on-screen prompts to complete the device binding.
2. Method 2: Manual Addition (if QR code is unavailable)
   • Open the O-KAM PRO app.
   • Tap the "+" icon in the upper right corner.
   • Select the "QR code not found" option.
   • Choose "4G Camera" or "WiFi camera" (despite being a 4G camera, the app might list it under a general camera category).
   • Follow the app's guidance to complete the device binding.

5.5 Camera Reset

If you encounter issues during setup or need to reconfigure the camera, you can perform a reset:

• When the camera is powered on, press and hold the reset button (refer to Figure 2 for location) for 3-5 seconds.
• You will hear a voice prompt and a sound indicating "reset is complete, the device will be restarted soon."
• The camera will then restart with factory default settings.

5.6 Installation

The camera can be installed on a ceiling or side wall. Ensure the solar panels are positioned to receive maximum sunlight throughout the day for optimal charging.

Figure 5: Installation Example and Key Features

• Use the provided mounting bracket and screws to securely attach the camera to your desired location.
• Adjust the angle of the solar panels to face the sun.
• The two bullet cameras can be manually adjusted 180 degrees horizontally and vertically to cover specific areas.

6. Operation

6.1 App Interface and Multi-Screen Viewing

The O-KAM PRO app allows you to view live feeds from all three lenses simultaneously. The interface typically displays three separate screens for each lens.

Figure 6: Three-Screen Simultaneous Monitoring in App

6.2 PTZ Control

The bottom lens of the camera supports Pan-Tilt-Zoom (PTZ) functionality, which can be controlled directly from the O-KAM PRO app.

• In the app, navigate to the live view of the bottom camera.
• Use the on-screen controls to pan (rotate horizontally 355°) and tilt (rotate vertically 90°) the lens.
• The two side bullet cameras can be manually adjusted for fixed viewing angles.

Figure 7: Three Lens PTZ Rotation

6.3 Recording Modes

The camera offers advanced recording modes to optimize battery life and capture important events.

• AOV 24/7 Record Mode: This mode uses AI-powered adaptive power management. It records at a low frame rate (1 frame/sec) in static scenes and switches to a high frame rate when motion is detected, ensuring continuous surveillance with minimal energy consumption.
• PIR Motion Detection: The camera utilizes a highly sensitive PIR motion sensor and radar detection to reduce false alarms. When motion is detected, the camera quickly wakes up (in 0.2 seconds) and captures all human movements, sending notifications to your smartphone.

Figure 8: AOV Low Power Recording

Figure 9: AOV Mode vs PIR Mode

6.4 Night Vision

The camera supports both infrared and full-color night vision.

• Infrared Night Vision: Provides clear black and white video in low-light conditions.
• Full-Color Night Vision: With built-in white fill lights, the camera can capture full-color video even at night. This can be configured in the app settings.

Figure 10: Night Vision Modes

6.5 Two-Way Audio

The integrated microphone and speaker allow for real-time two-way communication through the app.

• Tap the microphone icon in the app's live view to speak through the camera's speaker.
• The camera's microphone will pick up audio from the surveillance area.

Figure 11: Two-Way Audio

6.6 AI Detection and Tracking

The camera features intelligent AI algorithms for enhanced security.

• Humanoid Detection: When a human figure appears in the detection area, the camera automatically tracks and records its movement, sending an alarm message to your phone.
• Automatic Tracking: Enable humanoid detection and tracking in the app, and the bottom PTZ lens will automatically follow detected human movement.
• Audible and Visual Alarm: The camera can trigger a sound and light alarm upon detection to deter intruders.
• Other AI Detections: Supports vehicle and pet detection (may require cloud storage subscription).

Figure 12: Humanoid Detection

Figure 13: Automatic Tracking

6.7 Device Sharing

You can share access to your camera with family members or other trusted users.

• In the O-KAM PRO app, navigate to the device settings and find the "Device Sharing" option.
• You can grant full control permissions or limit access to view-only.
• If permissions are turned off, shared users can only watch the video and cannot change device settings.

7. Maintenance

7.1 Solar Charging and Battery Management

The camera is designed for long-lasting endurance through solar charging.

• Ensure the solar panels are clean and free from obstructions (e.g., leaves, dirt) to maximize charging efficiency.
• The 12000mAh high-density battery provides power even during periods of low sunlight.
• With proper solar panel placement, the battery can last up to 180 days on a full charge, working continuously with sufficient sunlight.

Figure 14: Long-Lasting Endurance Solar Charging

7.2 Weather Resistance

The camera has an IP66 waterproof rating, making it resistant to rain, snow, and dust.

• Regularly check the camera's housing for any signs of damage that might compromise its weather resistance.
• Clean the lenses periodically with a soft, damp cloth to ensure clear image quality.

Figure 15: IP66 Waterproof Rating

7.3 Storage Management

The camera supports both local TF card storage and cloud storage.

• TF Card Storage: Ensure a TF card is inserted for local recording. The camera supports up to 256GB. Regularly check the card's capacity and format it if necessary (this can usually be done via the app).
• Cloud Storage: Cloud storage is available as a paid subscription. This provides an additional layer of security for your recordings, ensuring footage is not lost even if the camera is damaged or stolen.

Figure 16: SD/Cloud Storage Options

8. Troubleshooting

9. Specifications

10. User Tips

• For optimal solar charging, ensure the solar panels are angled directly towards the sun and are not shaded by trees or buildings.
• Regularly check the O-KAM PRO app for firmware updates to ensure your camera has the latest features and security enhancements.
• If experiencing connectivity issues, try restarting the camera by briefly disconnecting and reconnecting its power source, or perform a full reset if necessary.
• To maximize battery life, consider adjusting motion detection sensitivity and recording schedules in the app to only capture events during critical times.

11. Warranty and Support

This product comes with a 1-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer's customer service. Refer to the product packaging or the official DiFang website for contact information.