JIUYIN JIUYIN 5-inch Motorcycle Navigation

Contents

JIUYIN 5-inch Wireless CarPlay Motorcycle Navigation System

Operating Instructions

1. Important Safety Information and Disclaimer

Please read the following instructions carefully before using the device. Failure to follow these instructions may result in damage to the device or personal injury.

  • This unit uses a negative ground and requires a 12V power supply.
  • Always switch off the power of the vehicle before installation and switch it on again only after installation is complete.
  • Plan the optimal mounting position before permanently fixing the unit.
  • Do not use high-pressure water guns to rinse this product, nor should it be soaked in water, to prevent water ingress.
  • Product specifications and appearance are subject to change without notice. Refer to the actual product display if there are discrepancies with graphics or descriptions.
  • This product is designed exclusively for motorbike vehicles.
  • Watching video programs or performing related operations while driving is prohibited by law in many regions. For your safety and the safety of others, avoid such activities while operating your vehicle.
  • The navigation functions are intended as an aid only and do not replace careful driving or sound judgment. The manufacturer is not responsible for any safety accidents resulting from distraction or negligence.
  • The TF card slot is for software upgrades only and cannot be used to read files.

Warning: Not for children under 8 years.

2. Product Overview

The JIUYIN 5-inch Motorcycle Navigation System offers a range of features to enhance your riding experience, including wireless connectivity for smartphones, tire pressure monitoring, and an intuitive control system.

JIUYIN 5-inch Motorcycle Navigation System mounted on handlebars

Figure 2.1: JIUYIN 5-inch Motorcycle Navigation System display showing CarPlay, Android Auto, and TPMS information.

Key Functions:

  • Wireless CarPlay: Connect your iPhone wirelessly via Wi-Fi and Bluetooth for navigation, music, and calls.
  • Wireless Android Auto: Connect your Android phone wirelessly via Wi-Fi and Bluetooth for navigation, music, and apps.
  • TPMS (Optional): Monitor tire pressure in real-time to ensure riding safety.
  • Controller (Optional): Equipped with a GPS signal receiver and local control buttons for volume adjustment, music track selection, and displaying vehicle speed.

3. Setup and Installation

3.1. Mounting the Main Unit

The installation schematic is for reference only. There are three suitable positions for mounting the main unit:

  • Crossbar: Mount the unit securely on the motorcycle's crossbar.
  • Handlebar: Mount the unit securely on the motorcycle's handlebar.

Ensure the chosen position provides clear visibility of the screen and does not obstruct your view or control of the motorcycle.

Product components including main unit, power cord, and bracket

Figure 3.1: Main components of the navigation system, including the 5-inch display, power cord, and mounting bracket.

3.2. Wiring Diagram

Connect the power cord to the vehicle's ACC line for convenient and practical power management. The GPS cable controller (if optional) should be installed in an accessible handlebar position.

Host wiring diagram showing connections for 12V power and ground

Figure 3.2: Host wiring diagram. Connect the RED wire to 12V (ACC), and the BLACK wire to GND. The power cord interface provides DC5V to the unit.

3.3. Wire Controller Installation (Optional)

If you have the optional wire controller, secure it to your handlebar using the two screws on the back of the controller.

3.4. TPMS Installation (Optional)

If your unit includes the optional TPMS function, follow these steps to install the external tire pressure sensors:

  1. Screw the anti-theft hexagonal nut onto the valve thread of the tire first.
  2. Screw the sensor clockwise onto the valve thread of the tire.
  3. Use the provided clamp to tighten the anti-theft hexagonal nut counter-clockwise against the sensor to lock it securely.

Note: After installation, check for air leakage around the sensor with soapy water.

4. Operating Instructions

4.1. Mobile Phone Connection

The device supports wireless CarPlay for iPhones and wireless Android Auto for Android phones.

Diagram showing wireless CarPlay and Android Auto connectivity

Figure 4.1: Wireless connectivity for Apple CarPlay and Android Auto via Bluetooth.

4.1.1. Wireless CarPlay Connection Steps:

  1. Select the CarPlay function from the device's mobile phone connection menu.
  2. On your iPhone, turn on Bluetooth and Wi-Fi. On the navigation unit, ensure Bluetooth and Wi-Fi are also enabled.
  3. Find the Bluetooth button on the device's main interface to check its Bluetooth information (e.g., SP_BT_78CEEC).
  4. Connect your iPhone to the corresponding Bluetooth name displayed on the device.
  5. After Bluetooth connection, wait for your iPhone to initiate CarPlay, and the screen will interconnect.
  6. Once successfully connected, the device will automatically reconnect after reboot.

To disconnect CarPlay, turn off Bluetooth and Wi-Fi on your phone, or turn off Wi-Fi and ignore the device in your phone's Bluetooth settings.

4.1.2. Wireless Android Auto Connection Steps:

  1. Select the Android Auto function from the device's mobile phone connection menu.
  2. On your Android phone, turn on Bluetooth and Wi-Fi. On the navigation unit, ensure Bluetooth and Wi-Fi are also enabled.
  3. Find the Bluetooth button on the device's main interface to check its Bluetooth information.
  4. Connect your Android phone to the corresponding Bluetooth name displayed on the device.
  5. After Bluetooth connection, wait for your Android phone to initiate Android Auto, and the screen will interconnect.

If using an Android phone from certain regions, you may need to update related components like Android Auto, Google Maps, Google Music, and Google Services.

4.2. System Set-up

Access the system settings by clicking the menu icon and navigating to the 'Settings' option.

4.2.1. General Settings:

  • Display Settings: Adjust brightness, contrast, color, and hue.
  • Product Info: View software version numbers and dates.
  • Factory Default: Restore all settings to factory defaults.
  • Speed Compensation: Adjust the difference between GPS test speed and actual speed for accuracy.
  • Speed Unit: Set the preferred speed unit (e.g., Km/h).
  • TPMS Settings: If no optional TPMS function is present, select 'off' to prevent TPMS information from displaying on the homepage.

4.2.2. Time Adjustment:

Manually set the year, month, day, hour, and minute. You can also select 24-hour format.

4.2.3. Language Settings:

Select your preferred language from the available options.

4.2.4. TPMS Matching (Optional):

To match the TPMS sensors:

  1. Screw the external tire pressure sensor onto the front tire nozzle. The tire will deflate slightly (you will hear air leaking).
  2. On the device, click the tire pressure interface's front wheel matching button ('FRO'). Once data appears, click 'Binding' to confirm matching.
  3. Remove the sensor and ensure no air leakage (test with soapy water).
  4. Repeat the process for the rear wheel.

TPMS Setting: Adjust low pressure, high pressure, and tire temperature thresholds based on your vehicle's specifications and manufacturer recommendations.

4.2.5. View GPS Information:

Access this section to view GPS status, elevation, direction, latitude, longitude, and speed.

4.2.6. Software Version Information:

Click the designated icon to view the device's software version details.

4.2.7. Connection Status:

A white label indicates no connection, while a blue mark signifies a successful connection.

4.3. Line Controller Function Description (Optional)

The optional line controller provides convenient access to common functions:

  • Previous Song: Navigate to the previous music track.
  • Next Song: Navigate to the next music track.
  • Volume Up: Increase the audio volume.
  • Volume Down: Decrease the audio volume.
  • Power On/Off: Turn the device on or off.

5. Maintenance

To ensure the longevity and optimal performance of your JIUYIN Motorcycle Navigation System, follow these maintenance guidelines:

  • Cleaning: Use a soft, damp cloth to clean the screen and device body. Avoid abrasive cleaners, solvents, or high-pressure water.
  • Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Software Updates: Periodically check for software updates to ensure optimal performance and access to new features.

Software Upgrade Method:

  1. Create a new folder on a TF card and name it F133_SMG.
  2. Copy the upgrade files into this folder.
  3. Insert the TF card into the machine's card slot. The device will automatically upgrade.
  4. Once the upgrade is complete, remove the TF card and power the device on again.

6. Troubleshooting

If you encounter issues with your device, try the following troubleshooting steps:

  • Device Not Powering On: Ensure the power cable is correctly connected to a 12V ACC source and ground. Check vehicle's fuse.
  • No Display: Check power connection. If powered, try a factory reset via system settings.
  • Wireless CarPlay/Android Auto Not Connecting:
    • Ensure Bluetooth and Wi-Fi are enabled on both the device and your smartphone.
    • Forget the device in your phone's Bluetooth settings and try pairing again.
    • Restart both the navigation unit and your smartphone.
  • GPS Signal Issues: Ensure the device has a clear view of the sky. If using an external GPS antenna, ensure it's properly connected and positioned.
  • TPMS Not Displaying Data: Ensure sensors are correctly installed and matched in the system settings. Check sensor batteries if applicable.

7. Specifications

FeatureSpecification
Screen Size5 inch
Resolution854*480 HD
Waterproof LevelIP67 (Full body waterproof and dustproof)
MaterialWaterproof Glass
Max External Memory64GB
Operating Temperature-20°C to +80°C
Power Supply12V (Negative Ground)
Standard FeaturesBluetooth 5.0, Wireless CarPlay, Wireless Android Auto, Touch Screen, Dust-proof Screen
Close-up of screen showing 800x480 HD resolution

Figure 7.1: The 854*480 HD resolution screen provides clear and delicate image quality, even under strong light.

Image showing IP67 waterproof rating

Figure 7.2: Full body IP67 waterproof and dustproof design ensures stable operation in rainy, muddy roads, and harsh environments.

Image showing operating temperature range from -20C to +80C

Figure 7.3: The device is designed to operate reliably in a wide temperature range from -20°C to +80°C.

8. User Tips

  • Easy Installation: Many users find the 5-inch size just right and the installation very simple, often only requiring fixing it on the handlebar.
  • Optimal Visibility: When mounting, consider direct sunlight and glare. Adjust the screen angle for best visibility during different times of day.
  • Secure Cables: Ensure all cables are neatly routed and secured to prevent them from interfering with motorcycle operation or getting damaged.

9. Frequently Asked Questions (FAQ)

Q: Can I use wired CarPlay/Android Auto?
A: This device is designed for wireless CarPlay and Android Auto connectivity only.
Q: Is the screen visible in direct sunlight?
A: The screen is designed for clarity, even under strong light conditions. Adjusting the screen angle can further improve visibility.
Q: What if my phone doesn't connect wirelessly?
A: Ensure Bluetooth and Wi-Fi are active on both devices, try restarting both, and ensure no other devices are interfering with the connection. Refer to the troubleshooting section.

10. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.

Manufacturer: Xinfeng County Chexiaoer Trading Co., Ltd.
Address: Jiuyin Technology, 3rd Floor, Building A, Fangshi Industrial Park, No. 82 Xingxue Road, Panyu District, Guangzhou City, Guangdong Province

For further assistance, please consult the official product page or contact customer service.

© 2024 JIUYIN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.