1. Product Introduction
Thank you for choosing the Xiaomi Smart IP Camera Standard Edition 2K. This manual provides essential information for the safe and effective use of your device. Please read it carefully before use and retain it for future reference.
1.1 Package Contents
- Camera Body
- Magnetic Base
- Power Adapter
- Power Cable
- Metal Sticker
- User Manual (this document)
1.2 Component Identification
Familiarize yourself with the different parts of your camera:
Figure 1: Xiaomi Smart IP Camera
Front View
- Indicator Light: Provides status feedback.
- Lens: Captures video footage.
- Microphone: For audio input and two-way communication.
- Magnetic Base: Allows for adjustable positioning and easy detachment.
Rear View
- Speaker: For audio output and two-way communication.
- Power Port: Connects to the power adapter.
- Magnetic Area: For secure attachment to the base.
- Nameplate: Contains product information, including model approval code.
Bottom View
- Reset Button: Used to reset the camera to factory settings.
- MicroSD Card Slot: For local video storage (visible after removing the magnetic base).
- Magnetic Area: For secure attachment to the base.
Note: The model approval code for the radio transmitting equipment is printed on the product nameplate, which is located on the magnetic base.
2. Installation
2.1 Camera Placement
The Xiaomi Smart IP Camera Standard Edition 2K can be placed on various flat surfaces such as a desk, dining table, coffee table, or TV cabinet. Its magnetic base allows for flexible positioning and easy adjustment of the viewing angle.
Figure 2: Camera placed on top of a TV
Note: Illustrations in this manual, including product, accessories, and user interface diagrams, are for reference only. Due to product updates and upgrades, the actual product may differ slightly from the illustrations. Please refer to the actual product.
2.2 Installing a MicroSD Card
To enable local video storage, playback, and time-lapse photography, you can install a MicroSD card.
- Ensure the camera is powered off before installing or removing the MicroSD card.
- Locate the MicroSD card slot on the bottom of the camera (you may need to detach the camera from its magnetic base).
- Insert the MicroSD card with the contacts facing upwards into the slot until it clicks into place.
Important: Use a genuine MicroSD card from a reputable manufacturer with a read/write speed of at least U1/Class10. The camera can operate without a MicroSD card, but video recording, playback, and time-lapse functions will not be available.
3. Setup
3.1 Powering On
- Connect the power cable to the camera's power port.
- Connect the other end of the power cable to the power adapter.
- Plug the power adapter into a power outlet. The camera will automatically power on.
Once powered on, the indicator light will glow solid yellow, and you will hear a voice prompt indicating successful startup.
3.2 Connecting to the Mi Home App
The Xiaomi Smart IP Camera integrates with the Mi Home app, allowing you to control it and interact with other smart home devices.
- Download the Mi Home App:
- Scan the QR code below with your smartphone to download and install the Mi Home app.
- Alternatively, search for "Mi Home" in your device's app store (Google Play Store for Android, Apple App Store for iOS) and install it.
- Add Device:
- Open the Mi Home app.
- If you are a new user, follow the on-screen instructions to create an account and log in.
- On the app's homepage, tap the "+" icon in the top right corner.
- Follow the in-app prompts to add your Xiaomi Smart IP Camera. This typically involves selecting the camera model and scanning a QR code on the camera's base.
Scan to download Mi Home App
Note: Due to updates to the Mi Home app, actual operation may differ slightly from the description above. Please follow the instructions within the current Mi Home app. Ensure your network is stable and the camera is powered on (solid yellow indicator light) during connection. Upon successful connection, the indicator light will turn solid blue.
4. Operation
4.1 Indicator Light Status
The indicator light provides visual feedback on the camera's status:
- Solid Yellow: Waiting for connection.
- Flashing Yellow: Connecting to the network.
- Flashing Blue: Connecting to the server.
- Solid Blue: Connected successfully.
4.2 Resetting the Camera
If you need to reset the camera to its factory settings:
- Locate the reset button on the bottom of the camera (you may need to detach the camera from its magnetic base).
- Use a pin or a similar pointed tool to press and hold the reset button.
- Release the button when you hear a voice prompt indicating a successful reset.
Note: Resetting the camera will not delete any content stored on the MicroSD card.
4.3 Key Features
- 2K Ultra-Clear Resolution: Enjoy detailed video footage with a resolution of 2304 x 1296 pixels.
Figure 3: 2K vs 1080p resolution comparison
- 940nm Clear Night Vision: Provides clear visibility in low-light conditions without visible red glow, ensuring undisturbed monitoring.
Figure 4: Clear night vision in action
- Two-Way Voice Call: Communicate directly through the camera using the Mi Home app, allowing for real-time interaction.
Figure 5: Two-way voice call via smartphone app
- Magnetic Base with 180° Rotation: The magnetic base allows for easy installation and flexible adjustment of the camera's viewing angle up to 180 degrees.
Video 1: Product demonstration showcasing features like magnetic base, rotation, night vision, and two-way audio.
5. Maintenance
- Keep the camera clean by gently wiping it with a soft, dry cloth.
- Avoid using harsh chemicals or abrasive cleaners.
- Ensure the camera is placed in an environment within the specified operating temperature range (-10°C to 50°C).
- Protect the camera from excessive humidity or direct water exposure, as it is a precision electronic product.
6. Troubleshooting
If you encounter issues, refer to the indicator light status and the following common problems:
| Problem | Possible Cause / Solution |
|---|---|
| Camera does not power on | Check if the power cable and adapter are securely connected and the power outlet is working. |
| Indicator light is off | Ensure the camera is powered on. If powered on, the light should be active. |
| Cannot connect to network (Flashing Yellow) | Check your Wi-Fi router and network connection. Ensure the camera is within Wi-Fi range. Try resetting the camera. |
| Reset button unresponsive | Ensure you are pressing the button firmly with a suitable tool. |
| No sound from speaker | Check volume settings in the Mi Home app. Ensure the speaker is not obstructed. |
| Microphone not picking up sound | Ensure the microphone is not obstructed. Check app settings for microphone access. |
| Image is too bright/dark or washed out | Avoid placing the camera lens directly facing or near reflective surfaces like glass or white walls, which can cause overexposure or underexposure. |
7. User Tips
- For optimal performance, ensure your camera is placed in an area with strong Wi-Fi signal coverage.
- Keep the camera away from microwave ovens or other devices that might interfere with its signal.
- Users have praised the camera's overall quality and performance, noting it as an excellent choice for home monitoring.
8. Specifications
| Product Name | Xiaomi Smart IP Camera Standard Edition 2K |
| Product Model | MJSXJ03HL |
| Rated Input | 5V⎓1A |
| Focal Length | 3.3mm |
| Video Encoding | H.265 |
| Operating Temperature | -10°C to 50°C |
| Product Dimensions | 60.0 × 48.0 × 67.5mm |
| Resolution | 2304 × 1296 |
| Lens Angle | 125° |
| CMIIT ID | 2021DP2290 |
| Wireless Connection | Wi-Fi IEEE 802.11b/g/n 2.4GHz |
| Storage Method | MicroSD Card |
| Supported Systems | Android 4.4 or iOS 9.0 and above |
| Executive Standards | GB 8898-2011, GB 17625.1-2012, GB/T 13837-2012 |
9. Safety Information and Compliance
9.1 Precautions
- This product is designed for use within a temperature range of -10°C to 50°C. Do not use it in environments with temperatures outside this range.
- As a precision electronic product, avoid using it in excessively humid conditions or environments where water may enter the product, as this may affect normal use.
- For optimal performance, avoid placing the camera lens directly facing or near reflective surfaces (e.g., glass, white walls) to prevent overexposure or underexposure in the image.
- Ensure the product is installed within the coverage area of a Wi-Fi signal and, if possible, in a location with better Wi-Fi signal strength. Avoid installing it near microwave ovens or other devices that may cause signal interference.
- If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid hazards.
9.2 Hazardous Substances Statement
The following table indicates the presence of hazardous substances in the product components, in accordance with SJ/T 11364 regulations.
| Component Name | Hazardous Substances | |||||
|---|---|---|---|---|---|---|
| Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) | |
| Casing | O | O | O | O | O | O |
| PCB Board | X | O | O | O | O | O |
| Cables | O | O | O | O | O | O |
| Accessories | O | O | O | O | O | O |
O: Indicates that the concentration of the hazardous substance in all of the homogeneous materials for this part is below the limit requirements of GB/T 26572.
X: Indicates that the concentration of the hazardous substance in at least one of the homogeneous materials for this part exceeds the limit requirements of GB/T 26572.
10. Warranty and Support
10.1 After-Sales Service Policy
Xiaomi Smart IP Camera Standard Edition 2K after-sales service strictly adheres to relevant consumer protection laws and product quality laws. The service policy is as follows:
- Within 7 days from the date of receipt: If the product exhibits performance faults listed in the "Product Performance Fault Table," confirmed by Xiaomi after-sales service center, you are entitled to a free return or exchange.
- Within 8-15 days from the date of receipt: If the product exhibits performance faults listed in the "Product Performance Fault Table," confirmed by Xiaomi after-sales service center, you are entitled to a free exchange or repair.
- Within 12 months from the date of receipt: If the product exhibits performance faults listed in the "Product Performance Fault Table," confirmed by Xiaomi after-sales service center, you are entitled to free repair services.
10.2 Non-Warranty Conditions
The warranty does not cover:
- Repairs, misuse, collision, negligence, abuse, liquid ingress, accidents, alterations, incorrect use of non-product accessories, or tearing/altering labels and anti-counterfeit marks without authorization.
- Products that have exceeded the warranty period.
- Damage caused by force majeure.
- Failure to meet the performance faults listed in the "Product Performance Fault Table."
- Performance faults of the camera and its accessories caused by human factors.
10.3 Product Performance Fault Table
| Fault Category | Description |
|---|---|
| Power/Startup | Product cannot power on when connected to electricity. |
| Indicator Light | Indicator light is not functional. |
| Reset Function | Reset button is not functional. |
| Audio Output | Speaker has no sound. |
| Audio Input | Microphone does not pick up sound. |
10.4 Contact Support
For after-sales service or support, please contact Xiaomi customer service:
- Service Hotline: 400-100-5678
- Official Website: www.mi.com/service
Manufacturer: Tianjin Huilai Technology Co., Ltd.
Address: 8th Floor, Overseas Chinese Entrepreneurship Building, No. 10 Jinping Road, Yaan Road, Nankai District, Tianjin (Science and Technology Park)
Manual Version: V1.0
PDF Reference: Original User Manual (PDF)