Introduction
This manual provides detailed instructions for the safe and efficient operation of your Suitu Car Cup Cooler & Warmer 2 in 1. This device is designed to intelligently control beverage temperature, offering both rapid cooling and heating functions for various drinks in your car or office.
Product Features
- 2-in-1 Functionality: Rapid cooling and heating for beverages.
- Intelligent Digital Display: Real-time temperature display for precise control.
- Smart Temperature Control: Maintains desired beverage temperature.
- Universal Compatibility: Suitable for various bottled and canned drinks, coffee, milk tea, and baby bottles.
- Low Decibel Silent Design: Optimized noise reduction for comfortable use.
- High-Quality Materials: Constructed from ABS Eco-friendly Plastic and Eco-friendly Aluminum.
Safety Precautions
- DO NOT add water directly into the cup holder.
- The power must be turned off when operating in a flammable environment.
- Ensure proper ventilation around the device during operation.
- Keep out of reach of children.
Setup
Package Contents:
- Suitu Car Cup Cooler & Warmer (Model IDZ003)
- Detachable Base Racket
- Power Cable (for DC-12V vehicle-mounted power source or household adaptor)
Component Identification:
Installation:
The device can be used in two configurations: directly in a cup holder or with the detachable base racket for added height.
- Place the Suitu Car Cup Cooler & Warmer into a stable cup holder in your vehicle or on a flat surface.
- Using the Detachable Base Racket: If your vehicle's cup position is deep, or if you wish to elevate the device, attach the detachable base racket to the bottom of the cup holder. This helps to ensure optimal contact with the beverage and enhances the cooling/heating effect.
- Connect the power cable to the Power Interface on the device.
- Plug the other end of the power cable into a DC-12V vehicle-mounted power source or a compatible household adaptor.
Operating Instructions
- Power On: Touch the power button for approximately 2 seconds to start the device. It will resume the mode (cooling or heating) that was active when it was last turned off. The indicator light will be blue for cooling and red for heating.
- Switch Modes: Briefly touch the screen (or mode button) to switch between heating and cooling modes. The indicator light will change accordingly (blue for cooling, red for heating).
- Temperature Control (Heating): When in heating mode, the device will control the temperature at approximately 58°C ± 5°C.
- Optimal Performance: For best cooling or heating results, insert the beverage bottle into the insertion mouth. The effects of cooling and heating vary depending on the material of the container; metal containers are more favored due to better thermal conductivity compared to plastic.
- Baby Bottle Warming: Place a milk bottle on the cooling and heating cup and activate heating mode to keep the milk warm or to assist in dissolving milk powder.
- Power Off: Touch the power button for approximately 2 seconds to turn off the device.
Maintenance
- Cleaning: Wipe the exterior of the device with a soft, damp cloth.
- DO NOT immerse the device in water or any other liquid.
- DO NOT add water directly into the beverage bottle insertion mouth.
- Ensure the heat emission holes are clear of obstructions for optimal performance and longevity.
- Store the device in a cool, dry place when not in use.
Troubleshooting
If the device is not functioning as expected, please check the following:
- No Power: Ensure the power cable is securely connected to both the device and the power source (DC-12V vehicle outlet or household adaptor). Verify that the power source is active.
- Ineffective Cooling/Heating:
- Check if the correct mode (cooling/heating) is selected, indicated by the blue/red light.
- Ensure the beverage container is made of a material that conducts temperature well, such as metal.
- Verify that the beverage bottle is fully inserted into the cup holder for maximum contact.
- Ensure the heat emission holes are not blocked.
- Device Not Turning On/Off: Ensure you are pressing the power button for approximately 2 seconds to activate or deactivate the device.
Specifications
| Parameter | Value |
|---|---|
| Product Model | IDZ003 |
| Product Material | ABS Eco-friendly Plastic + Eco-friendly Aluminum |
| Product Weight | 345g |
| Product Dimensions | 114mm * 94mm * 166mm (Length * Width * Height) |
| Rated Voltage | DC 12V |
| Rated Power | <36W |
| Rated Current | <3A |
| Operation Ambient Temperature | -20°C to 60°C |
| Mute Index | <40dB |
| Volume Capacity | >1L (Internal capacity for beverage container) |
| Certification | CE, FCC, RoHS |
| Package Length | 32 cm |
| Package Width | 13 cm |
| Package Height | 12 cm |
| Package Weight | 0.555 kg |
Warranty and Support
For any issues or inquiries regarding your Suitu Car Cup Cooler & Warmer, please contact the seller or manufacturer directly. Please refer to the original purchase documentation for specific warranty terms and conditions.
A detailed user manual in PDF format is also available for download: User Manual (PDF).