XIMA Universal 1-DIN 6.9 Inch Android Car Media Player

Contents

XIMA Universal 1-DIN 6.9 Inch Android Car Media Player

Instruction Manual

1. Introduction

Thank you for choosing the XIMA Universal 1-DIN 6.9 Inch Android Car Media Player. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure you get the best experience from your device. Please read this manual thoroughly before using the product.

2. Setup

2.1 Before Installation

Before installing the unit in your vehicle, it is recommended to test the device first. Due to potential impacts during shipping, testing the unit beforehand can help identify any issues. Do not install the product directly into the car without prior testing.2.2 Package Contents

Please check the package contents against the list below:

Package List for XIMA Car Media Player

Image: Package List for XIMA Car Media Player. This image shows the main unit (6.9" screen), 1 Power Cable, 2 RCA+MIC JACK cables, 3 Camera Input cable, 4 USB Cable*2, 5 GPS Antenna, and 6 Ext MIC (Gift).

  1. Main Unit (6.9-inch screen)
  2. Power Cable
  3. RCA + MIC Jack Cable
  4. Camera Input Cable
  5. USB Cables (x2)
  6. GPS Antenna
  7. External Microphone (Gift)

2.3 Rear Interface Description and Wiring

Carefully follow the wiring diagram below for proper connection. Incorrect wiring can cause damage to the unit or vehicle electrical system.

Rear Interface Wiring Diagram for XIMA Car Media Player

Image: Rear Interface Wiring Diagram for XIMA Car Media Player. The diagram details connections for the Power Plug (20P, 8P, 4P, 6P, 10P) and various audio/video inputs/outputs. The Power Plug includes: White (Front speaker), Gray (Front speaker), Green (Rear speaker), Purple (Rear speaker), Black (GND), Yellow (BATTERY +12V), Red (ACC Ignition Switch), Orange (ILLUMINATION Backlight), Pink (REVERSE Camera Control), Brown (KEY2 Steering Wheel Control-2), Orange/black striped (KEY1 Steering Wheel Control-1), Blue (ANT Auto Antenna Power). The 20P connector includes: F-CAM (Video-IN-2), AUX R IN, AUX L IN, VIDEO-IN-1, VIDEO OUT, FR OUT, FL OUT, SUB WOOF, MIC, AMP CONT. The 10P connector includes: BT Antenna, R-CAM (Reversing Camera Input), WiFi Antenna. The 4P/6P connector includes USB1/2. The 8P connector is for the Protocol Box (use only when needed).

  • Power Supply: Connect the Yellow wire (B+) to constant +12V, Red wire (ACC) to ignition switch +12V, and Black wire (GND) to vehicle ground.
  • Speakers: Connect the corresponding speaker wires (White, Gray, Green, Purple) to your vehicle's speakers. Ensure speaker wires are not grounded or short-circuited.
  • Steering Wheel Control: Connect KEY1 and KEY2 wires to your vehicle's steering wheel control wires.
  • Auto Antenna: Connect the Blue wire to your auto antenna power lead.
  • Video/Audio Inputs/Outputs: Connect external devices like cameras, auxiliary audio sources, and external amplifiers to the respective RCA jacks.

2.4 Reversing Camera Installation

Follow these steps to install the reversing camera:

Reversing Camera Installation Diagram

Image: Reversing Camera Installation Diagram. The diagram shows the camera connected to the reverse light for power (Red wire to Red wire, Black wire to GND) and the video signal cable connected to the unit's "Reversing Camera Input". The pink "Reverse" wire from the unit's harness should be connected to the vehicle's reverse light positive wire.

  1. Mount the reversing camera at the rear of your vehicle.
  2. Connect the camera's power wire (red) to the vehicle's reverse light positive wire, and the camera's ground wire (black) to vehicle ground.
  3. Connect the video signal cable from the camera to the unit's "Reversing Camera Input" (R-CAM).
  4. Connect the unit's "Reverse" control wire (pink) to the vehicle's reverse light positive wire.

Important: If a reversing camera is not installed, do not connect the REVERSE/BACK cable to any other wire. Leave it unconnected. Incorrect connection can cause the unit to malfunction or automatically enter reverse mode.

2.5 CANBUS Connection

Connect the CANBUS box according to your vehicle's model type:

For High-End Model Cars:

CANBUS Connection for High-End Models

Image: CANBUS Connection for High-End Models. The diagram shows the CANBUS box connected to the vehicle's wiring harness, and then the CANBUS box connected to the main unit. For high-end models, the CANBUS connection is typically direct.

For Low-End Model Cars:

CANBUS Connection for Low-End Models

Image: CANBUS Connection for Low-End Models. The diagram shows the CANBUS box connected to the vehicle's wiring harness, and then the CANBUS box connected to the main unit. For low-end models, the CANBUS connection might involve specific wiring or a different type of CANBUS box.

Attention: If the CANBUS box and black buckle are connected simultaneously, it may cause the radio to fail to shut down after the car is turned off.

3. Operating Instructions

3.1 Basic Operations

Video: Product demonstration showing UI navigation, volume control, settings access, and a physical overview of the unit. The video highlights the responsiveness of the touchscreen and the various applications available.

  • Power On/Off: Press and hold the power button (usually the volume knob) to turn the unit on or off.
  • Volume Control: Rotate the knob on the front panel to adjust the volume.
  • Touchscreen Interface: Navigate through menus and applications by tapping and swiping on the QLED touchscreen.
  • Home Screen: Access various functions like Radio, Music, Video, Navigation, Settings, and more from the main home screen.

3.2 Learning Steering Wheel Controls

To integrate your vehicle's steering wheel controls with the media player:

Steering Wheel Control Learning Diagram

Image: Steering Wheel Control Learning Diagram. The diagram shows KEY1 (Orange/black) and KEY2 (Brown) wires connecting to the vehicle's steering wheel control system. The on-screen interface for mapping buttons is also depicted, allowing users to assign functions like volume up/down, track skip, mode, etc.

  1. Go to the "Steering Wheel" settings menu on the unit.
  2. Press and hold a button on your original car's steering wheel.
  3. On the unit's screen, select the corresponding function icon (e.g., Volume Up, Next Track).
  4. The icon will change color to indicate successful learning. Repeat for all desired buttons.

3.3 Wireless CarPlay & Android Auto

This unit supports both Wireless CarPlay and Android Auto for seamless smartphone integration.

Wireless CarPlay & Android Auto Interface

Image: Wireless CarPlay & Android Auto Interface. This image shows the unit displaying the CarPlay interface within a car dashboard, with a smartphone connected wirelessly. Voice commands like "Hey Siri, Play Music" and "Hi, Google, Call Bob" are highlighted.

For Apple CarPlay (Some models support):

  1. Wired Connection: Connect your iPhone via a USB data cable. The CarPlay interface will launch automatically.
  2. Wireless Connection: Turn on Bluetooth and Wi-Fi on your iPhone. Pair your iPhone with the unit via Bluetooth. The CarPlay interface will launch automatically. (Note: The signal is transmitted via Wi-Fi. CarPlay will disconnect if Wi-Fi is turned off.)

For Android Auto (Some models support):

  1. Ensure "Google Play Services" are available locally and download/install the "Android Auto" app on your Android phone (Android 6.0 or higher required).
  2. Wired Connection: Connect your Android phone via a USB data cable. The Android Auto interface will launch automatically.
  3. Wireless Connection: Turn on Bluetooth and Wi-Fi on your Android phone. Pair your Android phone with the unit via Bluetooth. The Android Auto interface will launch automatically. (Note: The signal is transmitted via Wi-Fi. Android Auto will disconnect if Wi-Fi is turned off.)

3.4 Bluetooth Functions

Bluetooth Calling and Music Playback

Image: Bluetooth Calling and Music Playback. This image shows the unit displaying a Bluetooth call interface and music playback interface, indicating hands-free calling and audio streaming capabilities.

Pair your smartphone with the unit via Bluetooth to enable hands-free calling and audio streaming.

  1. Go to the Bluetooth settings on the unit and your smartphone.
  2. Search for the unit's Bluetooth name on your smartphone and pair them.
  3. Once connected, you can make/receive calls and play music wirelessly.

3.5 FM Radio

FM Radio Interface

Image: FM Radio Interface. This image shows the unit displaying an FM radio interface with frequency display, station presets, and tuning controls.

Access the FM Radio application to listen to your favorite stations. You can manually tune or use the auto-scan function to find and save stations.

3.6 AUX Connection

AUX Connection Diagram

Image: AUX Connection Diagram. This image illustrates how to connect an external audio device via the AUX input, showing a smartphone connected to the unit's RCA AUX input.

Connect external audio devices using the AUX input for playback.

3.7 Reversing Camera Display

Reversing Camera Display Features

Image: Reversing Camera Display Features. This image shows the unit displaying a clear view from a reversing camera with parking guidelines. Features like HD, 170° Viewing Angle, Waterproof, and Night Vision are highlighted.

When the vehicle is put into reverse gear, the unit will automatically display the rear view from the connected camera, providing parking assistance with guidelines.

4. Maintenance

To ensure the longevity and optimal performance of your XIMA Car Media Player, follow these simple maintenance guidelines:

  • Screen Cleaning: Use a soft, lint-free cloth slightly dampened with water or a screen cleaner to wipe the QLED display. Avoid using harsh chemicals or abrasive materials.
  • General Cleaning: Keep the unit free from dust and debris. Use a soft brush or compressed air to clean around buttons and ports.
  • Avoid Extreme Temperatures: Do not expose the unit to extreme heat or cold for prolonged periods, as this can affect its performance and lifespan.
  • Software Updates: Periodically check for available software updates from the manufacturer to ensure optimal performance and access to new features.

5. Troubleshooting

This section addresses common issues you might encounter and provides solutions.

5.1 Cannot Boot Normally

  1. Wiring Check: Ensure the Yellow (B+), Red (ACC), and Black (GND) wires are correctly connected. Yellow to constant +12V, Red to ignition +12V, Black to ground.
  2. Fuse Check: Verify if the fuse on the Yellow wire is intact. Replace if blown.
  3. Test Power: If wiring is correct and fuse is good, twist the Yellow and Red wires together, turn the key, and press the unit's power button. If it powers on, there might be an issue with your vehicle's ACC wire or original car wiring.
  4. Short Circuit: If fuses repeatedly blow, there might be a short circuit in the unit's protection circuit. Seek professional repair.

5.2 Automatic Shut-Down

  1. Incorrect Wiring: If the blue (auto antenna power) cable is connected to the unit's power cable, it may cause automatic shutdown. Ensure correct wiring.
  2. Unstable Voltage: Test the unit with a stable 12V-5A power supply. If it still shuts down, the unit may be faulty.

5.3 Audio Issues (Noise, No Sound, Cannot Adjust)

  1. Noise: If there is noise, check if speaker power is too low (increase volume) or if speaker cables are grounded. Ensure speaker cables are not touching vehicle chassis.
  2. No Sound After Installation: Check all speaker cables for short circuits or incorrect connections. Ensure your vehicle's original speaker wiring matches the unit's requirements (e.g., 4 speaker cables for 2 speakers).
  3. No Sound After A While: Disconnect all speaker cables from the unit. Connect an external speaker to the unit's output wires (Gray, Purple, Green) to test for sound. If sound is present, your car's speaker line might be short-circuited or speakers are damaged. If no sound, the unit is faulty.
  4. Cannot Adjust Sound: Try resetting the unit or unplugging/replugging the power cord. If the volume knob is broken, it may need replacement.

5.4 Remote Control Cannot Be Used

Test the remote by pointing it at a mobile phone camera and pressing a button. If you see a light on the phone screen, the remote is working. If not, replace the battery.

5.5 Settings Not Saved (No Memory)

  1. Ensure the Yellow (B+) and Red (ACC) wires are correctly connected (Yellow to constant +12V, Red to ignition +12V).
  2. If they are reversed, swap their positions.

5.6 Bluetooth Not Working

Ensure Bluetooth is enabled on both the unit and your smartphone. Search for the unit's Bluetooth name on your phone and pair. If issues persist, try restarting both devices.

5.7 Product Emits Smoke

Immediately turn off the unit. Replace the fuse. If the problem persists, the internal circuit may be damaged. Seek professional service.

5.8 Reversing Camera Does Not Display

  1. Wiring Check: Ensure the camera is correctly wired (power, ground, video signal, and reverse trigger wire).
  2. Camera Fault: If the camera's indicator light (if any) does not turn on, the camera itself might be faulty and require replacement.

5.9 USB Devices Cannot Be Played

Format the USB flash drive to FAT32. Re-download music files and try again. If the issue persists, try a different USB flash drive.

5.10 FM Does Not Receive Radio Stations

  1. Antenna Connection: Ensure the antenna plug is fully inserted. Check if the antenna is disconnected or damaged.
  2. Scan Stations: Use the auto-scan (AS) function to search for stations.
  3. Antenna Test: If issues persist, try unplugging the antenna and inserting a metal strip (like a screwdriver) into the antenna port as a temporary antenna to test reception.

6. Specifications

XIMA Car Media Player Main Features

Image: XIMA Car Media Player Main Features. This image highlights key specifications such as 4GB RAM + 64GB ROM, Android 16, ASP-DSP, 1280*480 QLED Screen, Fan Cooling, CarPlay, and Android Auto.

Product Dimensions

Image: Product Dimensions. This image provides the physical dimensions of the unit: 193mm width, 70mm height, and 121mm depth (including mounting frame), with a screen size of 6.9 inches.

FeatureSpecification
Brand NameXIMA
Din Size1-DIN
Display Size6.9 inches
ResolutionQLED 1280*720
Operating SystemAndroid 16
RAM4GB
ROM64GB
Max External Memory128GB
Out Power50W x 4
Voltage12 V
Item Weight1kg
Item Size230*130*220 mm (approx. 193mm width, 70mm height for main unit)
Special FeaturesBuilt-In Speaker/Microphone, WiFi, 4G Network Support, Built-in GPS, Mobile Phone Link, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Steering Wheel Control
Digital Media FormatCD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG
OSD LanguageMulti-language support (46 countries including English, Russian, Spanish, etc.)
CertificationCE
Material TypeABS+
Subwoofer OutputSupport
AV-OUTWiFi version support
Input Interface2*USB, RCA, Bluetooth
GPS NavigationBuilt-in offline map (supports Navitel/Igo)

7. Warranty and Support

7.1 Warranty

This product comes with a 1-year warranty from the date of purchase. The warranty covers manufacturing defects. Please retain your proof of purchase for warranty claims.

7.2 Customer Support

If you require further assistance, have questions, or encounter issues not covered in this manual, please contact customer service using the following channels:

Customer Support QR Codes
Scan the QR codes for direct access to support via WhatsApp, TikTok, and other platforms.

8. User Tips

  • Clock Display: If the clock display on the side of the screen cannot be turned off, check the unit's display settings or system settings for options related to clock visibility or screen savers.
  • Missing Accessories: Upon unboxing, verify all items listed in the package contents are present. If any USB cables or other accessories are missing, contact customer support immediately for assistance.
  • Unit Getting Stuck: If the unit becomes unresponsive or "gets stuck," try performing a soft reset (usually by pressing a small reset button with a pin) or a factory reset through the system settings. Ensure the firmware is up to date.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.