1. Safety Information
For your own safety and the safety of others, and to prevent damage to the device and vehicles upon which it is used, it is important that the safety instructions presented throughout this manual be read and understood by all persons operating or coming into contact with the device.
There are various procedures, techniques, tools, and parts for servicing vehicles, as well as in the skill of the person doing the work. Because of the vast number of test applications and variations in the products that can be tested with this equipment, we cannot possibly anticipate or provide advice or safety messages to cover every circumstance. It is the automotive technician's responsibility to be knowledgeable of the system being tested. It is crucial to use proper service methods and test procedures. It is essential to perform tests in an appropriate and acceptable manner that does not endanger your safety, the safety of others in the work area, the device being used, or the vehicle being tested.
Before using the device, always refer to and follow the safety messages and applicable test procedures provided by the manufacturer of the vehicle or equipment being tested. Use the device only as described in this manual. Read, understand, and follow all safety messages and instructions in this manual.
1.1 Safety Messages
Safety messages are provided to help prevent personal injury and equipment damage. All safety messages are introduced by a signal word indicating the hazard level.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or to bystanders.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders.
1.2 Safety Instructions
The safety messages herein cover situations Autel is aware of. Autel cannot know, evaluate or advise you as to all of the possible hazards. You must be certain that any condition or service procedure encountered does not jeopardize your personal safety.
DANGER
When an engine is operating, keep the service area WELL VENTILATED or attach a building exhaust removal system to the engine exhaust system. Engines produce carbon monoxide, an odorless, poisonous gas that causes slower reaction time and can lead to serious personal injury or loss of life.
- Always perform automotive testing in a safe environment.
- Wear safety eye protection that meets ANSI standards.
- Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
- Operate the vehicle in a well-ventilated work area, for exhaust gases are poisonous.
- Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission) and make sure the parking brake is engaged.
- Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.
- Be extra cautious when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running.
- Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.
- Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
- Keep the test equipment dry, clean, free from oil, water or grease. Use a mild detergent on a clean cloth to clean the outside of the equipment as necessary.
- Do not drive the vehicle and operate the test equipment at the same time. Any distraction may cause an accident.
- Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and precautions. Failure to do so may result in personal injury or damage to the test equipment.
- To avoid damaging the test equipment or generating false data, make sure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure.
- Do not place the test equipment on the distributor of the vehicle. Strong electro-magnetic interference can damage the equipment.
2. Product Overview
The Autel MaxiIM IM508S is an ultra-fast portable programming scan tool, significantly upgraded from IM508 and MaxiIM KM100. It combines powerful programming, comprehensive OE diagnostics, and hot services. Equipped with Smart Mode & Expert Mode and XP200 Programmer, it supports various functions such as: Reading PIN, Key generation, Remote learning, IMMO ECU reset/adaptation, refresh/coding, etc. The IM508S is designed to deliver superior performance and versatility, making it an indispensable tool for automotive professionals.
This manual describes the construction and operation of the tools and how they work together to deliver diagnostics solutions.
2.1 MaxiIM IM508S Tablet
The MaxiIM IM508S tablet features a fast quad-core processor and a 7-inch LCD touchscreen with 1024x600 resolution. It runs on Android 11.0 and provides superior special functions including Oil Reset, EPB, SAS, BMS, DPF, IMMO, and TPMS. It also offers quick reading and clearing of DTCs for most vehicle makes and models.
The tablet's front view includes a 7.0" LCD Capacitive Touchscreen, an Ambient Light Sensor (detects ambient brightness), a Power LED (indicates battery level & charging or system status), and a Vehicle Communication LED (flashes green when communicating/linking with the vehicle's system).
The back view features a Collapsible Stand (extends from the back to allow hands-free viewing) and a Heat Sink. The top view includes a Mini USB Port, Micro SD Card Slot (holds the micro SD card), DB15-Pin Port (connects the main cable), USB Port, and a Power/Lock Button (turns the device on & off with long press, or locks the screen with short press).
2.2 XP200 Key Programmer
The XP200 Key Programmer is specially designed to read vehicle key chip data, clone and generate exclusive keys, read/write on-board EEPROM data, and read/write Freescale 9S12 MCUs. By working with the Tablet and PC that are both loaded with programmer software, the XP200 Key Programmer can read/write key chip data quickly and accurately.
The XP200 features a Vehicle Key Chip Slot (holds the vehicle key chip to read and write vehicle key information), a Vehicle Key Slot (holds the vehicle key to read and write vehicle key information), a Status LED Light (indicates the current operating status), a Connection Port (connects the EEPROM Adapter and the EEPROM Clamp Integrated MC9S12 Cable), and a Mini USB Port (provides data communication and power supply).
The Status LED Light indicates the following:
- Red: Lights red when firmware is upgrading or an error has occurred. Lights red briefly when device is powered on and performing self-check.
- Green: Flashes green when communicating via USB cable. Lights green when device is ready for use.
3. Setup
3.1 Unboxing
The MaxiIM IM508S comes in a protective carrying case. Carefully open the case and remove all components.
Video: Unboxing the Autel MaxiIM IM508S and its accessories.
3.2 Accessories Included
The MaxiIM IM508S package includes the following items:
- Main Unit (MaxiIM IM508S Tablet)
- XP200 Key Programmer
- Main Cable (DB15-Pin to OBD-II connector)
- USB Type-C Cable
- Mini USB Cable
- Power Adapter
- APB001 (EEPROM Adapter)
- APB002 (68HC908 Adapter)
- APA002 (EEPROM Socket)
- APA001 (EEPROM Clamp Integrated MC9S12 Cable)
- Quick Reference Guide
- Packing List
- Soft Cloth
- Carrying Case
Image: Detailed view of the Autel MaxiIM IM508S packing list, showing all included components.
3.3 Powering Up
Ensure the tablet is sufficiently charged or is connected to the external power supply.
- Long press the Power/Lock button on the top-right of the tablet to power on the unit. The power LED will illuminate green.
- The system boots up and displays the Lock screen. Swipe up to unlock the screen.
NOTE: The tablet screen is locked by default after powered on. It is recommended to lock the screen to protect the information in the system and reduce the power consumption.
4. Operating Instructions
4.1 Navigation
The touch screen navigation is menu-driven, allowing quick access to functions by tapping application buttons and responding to dialog windows.
4.1.1 Application Buttons
The MaxiIM Job Menu displays various application buttons:
- IMMO: Accesses the IMMO functions menu.
- Programmer: Accesses the Programming functions menu.
- Diagnostics: Accesses the diagnostics functions menu.
- Service: Accesses the special functions menu.
- Update: Checks and downloads the latest updates.
- Settings: Accesses MaxiIM system settings menu.
- Remote Desktop: Configures the unit to receive remote support.
- Data Manager: Accesses the organization system for saved data.
- Support: Synchronizes Autel's online service database.
- MaxiViewer: Provides a quick search for supported functions and/or vehicles.
- Quick Link: Provides associated website bookmarks.
4.1.2 Locator and Navigation Buttons
Buttons at the bottom of the screen facilitate navigation:
- Locator: Indicates screen location; swipe left/right for previous/next screen.
- Back: Returns to the previous screen.
- MaxiIM Home: Enters MaxiIM job menu.
- Android Home: Enters Android System's home screen.
- Recent Apps: Displays a list of currently used applications.
- Chrome: Launches the Android built-in browser.
- Screenshot: Saves the displayed screen as an image.
- Brightness: Adjusts screen brightness.
- IMMO Shortcut: Enters the IMMO screen.
- Diagnostic Shortcut: Enters the Diagnostics screen.
- Service Shortcut: Enters the Service screen.
4.2 IMMO Application
The IMMO application provides Automatic Selection, Manual Selection, and System Selection to guide technicians in performing IMMO-related functions, including Key Learning, Remote Control Learning, and Remote Control Add.
Ensure a communication link is established between the test vehicle and the tablet via the main cable, and the XP200 is connected to the tablet with the supplied USB cable.
4.2.1 Vehicle Identification
The MaxiIM IMMO system supports four methods for Vehicle Identification:
- Auto VIN Scan: The system features the latest VIN-based Auto VIN Scan function to identify vehicles.
- Manual VIN Input: For vehicles not supporting Auto VIN Scan, you can manually enter the VIN.
- Automatic Selection: Select after choosing the test vehicle manufacturer.
- Manual Selection: For vehicles where VIN is not automatically retrievable or unknown.
4.2.2 IMMO Screen Layout
IMMO screens typically include four sections: Operation Toolbar, Status Information Bar, Main Section, and Function Buttons.
The Operation Toolbar contains buttons like Print and Save. The Status Information Bar shows screen heading and vehicle's voltage status. The Main Section varies by operation stage and vehicle brand. Function Buttons change based on the operation stage and are used for navigation, saving data, exiting scans, and other control functions.
4.2.3 IMMO Status Scan
The IMMO Status Scan function performs a comprehensive scan over all systems on the vehicle's IMMO ECU to locate fault systems and retrieve DTCs.
The scan results display systems highlighted in different colors, each representing a varied status:
- -!- : Indicates the scanned system may not support code reading or a communication error.
- -?- : Indicates the vehicle control system has been detected, but the tablet cannot accurately locate it.
- Fault | #: Indicates detected fault code(s) present.
- Pass | No Fault: System passed scanning process with no fault.
- Unknown Status: System not scanned.
- Not Responded: No response received.
- N/A: System not selected.
- Unselected System: System not selected for testing.
- Selected: System is selected for testing.
4.2.4 Control Unit
This option allows manual location of a required IMMO control system for testing. Follow the menu-driven procedure to select the correct IMMO part. Control unit menu options vary by vehicle and may include Immobilizer, Remote System, Engine, and IMMO Adaptation.
4.2.5 Hot Function
Hot functions are guided, step-by-step instructions. Available functions vary by test vehicle and may include Add Key (guided). Follow on-screen instructions to complete the operation.
4.2.6 Vehicle IMMO Information
This function displays specific information about the tested vehicle, including key programming information, key details, and OBD position.
4.3 Programmer Application
The Programmer application requires connection between the tablet and the XP200. No vehicle connection is required. This application can read, retrieve, and write key information, as well as other key-related functions after accessing the key chip.
4.3.1 Operations (Chip Read & Write)
- Select Chip Read & Write from the menu.
- Select the chip type (e.g., EEPROM).
- Select Read to read the chip data. The Chip Data screen will display the data.
- Select Save to save the data to the tablet, or Cancel to exit. Enter the file name and confirm.
- Select Write from the operations menu. The tablet will open the default folder. Select the saved data and click OK to write it into a blank chip.
4.4 Diagnostics Application
The Diagnostics application retrieves ECU information, reads & erases DTCs, and views live data. It accesses the ECU for various vehicle control systems (engine, transmission, ABS, SRS).
4.4.1 Diagnosis
The Diagnostics application enables a data link to the electronic control system of the test vehicle via OBDII connection. It performs function tests and retrieves diagnostic information.
- Auto Scan: Starts auto scanning for all available systems on the vehicle.
- Control Unit: Displays a selection menu of all available control units.
4.4.2 Generic OBDII Operations
A fast-access option for OBDII/EOBD vehicle diagnosis is available. This option helps check for DTCs, isolate MIL causes, check monitor status for emissions testing, verify repairs, and perform other emissions-related services.
To access OBDII/EOBD diagnostics functions:
- Tap the Diagnostics application button on the MaxiIM Job Menu.
- Tap the EOBD button. Choose between Auto Scan (tool determines protocol) or Protocols (manual selection of protocol).
- Select a specific protocol under Protocols.
- Select a function option to continue: DTC & FFD, I/M Readiness, Live Data, O2 Sensor Monitor, On-Board Monitor, Component Test, Vehicle Information, Vehicle Status.
4.4.3 Exiting Diagnostics
The Diagnostics application remains open as long as there is active communication with the vehicle. You must exit the diagnostics operation to stop all communications before closing the application.
NOTE: Damage to the vehicle electronic control module (ECM) may occur if communication is disrupted. Ensure all connections are secure. Exit all tests before disconnecting the test cable or powering down the tablet.
To exit the Diagnostics application:
- On an active diagnostics screen, tap the Back or ESC button to exit step-by-step.
- Or tap the Vehicle Swap button on the diagnostics toolbar to return to the Vehicle Menu screen.
- On the Vehicle Menu screen, tap the Home button on the top toolbar or the Back button on the navigation bar.
- Or tap the Home button on the diagnostics toolbar to exit the application directly.
4.5 Service Functions
The Service section provides quick access to vehicle systems for scheduled service and maintenance. Follow on-screen instructions to select options, enter values, and perform necessary actions.
Commonly performed service functions include:
- Oil Reset Service: Resets Engine Oil Life System and service intervals.
- EPB Service (Electronic Parking Brake): Resets parking brake pads after replacement.
- BMS Service (Battery Management System): Evaluates battery charge state, monitors close-circuit current, registers battery replacement, and activates rest state.
- SAS Service (Steering Angle Sensor): Calibrates the steering angle sensor.
- TPMS Service (Tire Pressure Monitor System): Looks up tire sensor IDs, performs TPMS replacement and reset procedures.
- IMMO Keys: Disables lost vehicle keys and programs replacement key fobs.
- DPF Service (Diesel Particulate Filter)
- Injector Coding
- ABS Bleed
- Sunroof Reset
- Suspension Reset
- Gearbox Reset
5. Maintenance
To ensure the longevity and proper functioning of your MaxiIM IM508S, follow these maintenance guidelines:
- Use a soft cloth and alcohol or a mild window cleaner to clean the touch screen.
- Do not use abrasive cleansers, detergents, or automotive chemicals.
- Keep devices dry and within normal operating temperatures.
- Dry your hands before using the tablet.
- Do not store devices in humid, dusty, or dirty areas.
- Check housing, wiring, and connectors for dirt and damage before and after each use.
- At the end of each workday, wipe the device housing, wiring, and connectors clean with a damp cloth.
- Do not attempt to disassemble your tablet or the VCI unit.
- Do not drop or cause severe impact to the devices.
- Use only authorized battery chargers and accessories.
- Ensure the battery charger does not contact conductive objects.
- Do not use the tablet near microwave ovens, cordless phones, or medical/scientific instruments to prevent signal interference.
6. Troubleshooting
6.1 When the Tablet does not work properly:
- Make sure the tablet has been registered online.
- Make sure the system software and diagnostic application software are properly updated.
- Make sure the tablet is connected to the Internet.
- Check all cables, connections, and indicators to see if the signal is being received.
6.2 When battery life is shorter than usual:
- This may happen in areas with low signal strength. Turn off your device if not in use.
6.3 When you cannot turn on the tablet:
- Make sure the tablet is connected to a power source or the battery is charged.
6.4 When you are unable to charge the tablet:
- Your charger may be out of order.
- You may be attempting to use the device in an overly hot/cold temperature. Charge the device in a cooler or warmer area.
- Your device may not have been connected to the charger properly. Check the connector.
NOTE: If problems persist, contact Autel's technical support personnel or your local selling agent.
7. Specifications
7.1 MaxiIM IM508S Tablet
| Item | Description |
|---|---|
| Operating System | Android 11 |
| Processor | Rockchip RK3566 Quad core, 4x 1.8GHz(A55) |
| Memory | 4GB RAM & 64GB On-board Memory |
| Display | 7-inch LCD capacitive touchscreen with 1024x600 resolution |
| Connectivity | Mini USB 2.0, USB 2.0, Wi-Fi, Micro SD card slot (supports up to 32GB) |
| Sensors | Ambient light sensor for brightness auto changing |
| Audio Input / Output | Input: N/A, Output: buzzer |
| Power and Battery | 3.7 V/5000 mAh lithium-polymer battery, Charges via 5 VDC power supply |
| Tested Battery Life | Around 7 hours of continuous use (manual states 4.5 hours in desc.json, 7 hours in OCR) - using 7 hours from OCR. |
| Battery Charging Input | 5 V/1.5 A |
| Power Consumption | 500 mA (LCD on with default brightness, Wi-Fi on) @3.7 V |
| Operating Temp. | 0 to 50°C (32 to 122°F) |
| Storage Temp. | -20 to 60°C (-4 to 140°F) |
| Operating Humidity | 5% - 95% non-condensing |
| Dimensions (W x H x D) | 237.8 mm (9.4") x 148.6 mm (5.9") x 35.5 mm (1.4") |
| Net Weight | 788 g (2.42 lbs.) |
| Protocols | ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6 |
7.2 XP200 Key Programmer
| Item | Description |
|---|---|
| Operating Temperature | -10 to 50°C (14 to 122°F) |
| Storage Temperature | -20 to 60°C (-4 to 140°F) |
| Port | Mini USB, VGA_DB15 |
| Input Voltage | 5 VDC |
| Operating Current | < 250 mA |
| Maximum Consumption | 1 W |
| Device Dimensions (L x W x H) | 130 mm (5.1") x 68 mm (2.7") x 28 mm (1.1") |
| Package Dimensions (L x W x H) | 201 mm (7.9") x 167 mm (6.6") x 75 mm (3") |
| Net Weight | 466 g (1.03 lbs.) |
8. Warranty and Support
8.1 Trademarks and Copyright Information
Autel®, MaxiIM®, MaxiSys®, MaxiDAS®, MaxiScan®, MaxiTPMS®, MaxiRecorder®, and MaxiCheck® are trademarks of Autel Intelligent Technology Corp., Ltd., registered in China, the United States and other countries. All other marks are trademarks or registered trademarks of their respective holders.
No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise without the prior written permission of Autel.
8.2 Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on the latest information available at the time of printing. Autel reserves the right to make changes at any time without notice. While information of this manual has been carefully checked for accuracy, no guarantee is given for the completeness and correctness of the contents, including but not limited to the product specifications, functions, and illustrations. Autel will not be liable for any direct, special, incidental, indirect damages or any economic consequential damages (including the loss of profits).
8.3 Limited One Year Warranty
Autel Intelligent Technology Corp., Ltd. warrants to the original retail purchaser of this MaxiIM Diagnostic Device that should this product or any part thereof during normal consumer usage and conditions, be proven defective in material or workmanship that results in product failure within one (1) year period from the date of purchase, such defect(s) will be repaired, or replaced (with new or rebuilt parts) with Proof of Purchase, at the Company's option, without charge for parts or labor directly related to the defect(s).
This warranty does not apply to:
- Products subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation or repair or improper storage.
- Products whose mechanical serial number or electronic serial number has been removed, altered or defaced.
- Damage from exposure to excessive temperatures or extreme environmental conditions.
- Damage resulting from connection to, or use of any accessory or other product not approved or authorized by the Company.
- Defects in appearance, cosmetic, decorative or structural items such as framing and non-operative parts.
- Products damaged from external causes such as fire, dirt, sand, battery leakage, blown fuse, theft or improper usage of any electrical source.
IMPORTANT: All contents of the product may be deleted during the process of repair. You should create a back-up copy of any contents of your product before any repair services.
8.4 For Services and Support:
- Web: pro.autel.com, www.autel.com
- North America: 1-855-288-3587
- China: +86 (0755) 8614-7779
- Email: support@autel.com
- For technical assistance in all other markets, please contact your local selling agent.
8.5 Product Registration
To access the Support platform and obtain updates and other services, you must register your MaxiIM IM508S the first time you use it.
- Visit http://pro.autel.com.
- Click Register to create your Autel ID.
- If you have an Autel ID, log in.
- Enter your personal information (fields marked with an asterisk are mandatory).
- Enter your email address, then click Request.
- You will receive an email with a verification code. Copy the code into the input box.
- Set a password for your account and confirm.
- Read and accept the Autel User Service Agreement and Autel Privacy Policy.
- After entering all information, click Register.
- You will be redirected to the Product Registration screen.
- To find your product serial number and password on the tablet: go to Settings > About.
- Enter your tablet's serial number and password.
- Enter the CAPTCHA code.
- Click Submit to complete your product registration.