1. Introduction
Thank you for choosing the MCHOSE G3 V2 Pro/Ultra Lightweight E-sports Mouse. This manual provides detailed instructions on how to set up, operate, and maintain your new mouse to ensure optimal performance. This mouse features a lightweight design, multi-mode connectivity (wired, 2.4G wireless, and Bluetooth), and a high-performance optical sensor.

Figure 1: MCHOSE G3 V2 Pro Mouse (White, Black, Blue)
2. Package Contents
Please check the package for the following items:
- MCHOSE G3 V2 Pro/Ultra Lightweight E-sports Mouse
- USB Type-C to USB-A Cable
- USB 2.4G Receiver
- User Manual (this document)
3. Product Overview
Familiarize yourself with the components of your MCHOSE G3 V2 Pro mouse:

Figure 2: MCHOSE G3 V2 Mouse Components
- Type-C Port: For wired connection and charging.
- DPI Indicator Light: Shows current DPI level.
- DPI Switch Button: Cycles through DPI settings.
- Indicator Light: Displays connection status and battery level.
- Mode Switch: Selects between 2.4G Wireless, Wired, and Bluetooth modes.
- USB Receiver: For 2.4G wireless connection.
4. Setup and Connection
4.1. 2.4G Wireless Connection
- Switch the mode button on the bottom of the mouse to the 2.4G position.
- Remove the USB receiver from its storage slot on the mouse.
- Insert the USB receiver into an available USB port on your computer.
- Manual Pairing (if needed): If the mouse does not connect automatically (factory default is usually pre-paired), press and hold the left, middle, and right mouse buttons simultaneously for approximately 3 seconds until the indicator light flashes rapidly. The mouse will enter pairing mode. Ensure the USB receiver is inserted into your computer's USB port and keep the mouse within 20 cm of the receiver. The indicator light will turn off once the connection is successful.
4.2. Bluetooth Wireless Connection
- Switch the mode button on the bottom of the mouse to the BT position.
- On your computer or device, go to Bluetooth settings and search for new devices.
- Select the device with the corresponding pairing name (e.g.,