1. Introduction
Thank you for choosing the HEGEHE LED Cabinet Bar Light. This product is designed to provide efficient and versatile lighting for your kitchen cabinets, shelves, or other indoor spaces. Featuring a 90-degree profile, it is ideal for corner installations. This manual provides essential information for the safe and effective setup, operation, and maintenance of your LED bar light.
Important Note: The power supply and power cord are NOT included with this product and must be purchased separately.
Figure 1: LED Cabinet Bar Light with mounting clips, screws, and adhesive tape.
2. Setup and Installation
Follow these steps to properly install your LED Cabinet Bar Light:
- Unpack: Carefully remove all components from the packaging. Ensure you have the LED bar light, mounting clips, screws, and adhesive tape.
- Choose Location: Select a suitable, dry indoor location for installation, such as under kitchen cabinets or inside shelves. The 90-degree profile is ideal for corner mounting.
- Prepare Surface: Clean the mounting surface thoroughly to ensure it is free of dust, grease, and moisture. This is crucial for secure adhesion if using tape.
- Mounting Options:
- Using Clips and Screws: Position the metal mounting clips at desired intervals along the installation path. Secure them with the provided screws.
- Using Adhesive Tape: Peel the backing from the adhesive tape strips and apply them to the back of the LED bar light or directly to the cleaned mounting surface.
- Attach Light: Gently press the LED bar light into the mounted clips until it snaps securely into place, or firmly press the light bar with adhesive tape onto the prepared surface.
- Connect Power: Connect the light's DC connector to a compatible DC12V power supply (not included). Ensure the polarity is correct.
Figure 2: Installation diagram showing mounting under a cabinet. Note: Power supply and power cord are not included.
Figure 3: The 90-degree profile of the light bar, ideal for corner installations.
3. Operating Instructions
Operating your HEGEHE LED Cabinet Bar Light is straightforward:
- Once properly installed and connected to a compatible DC12V power supply, the light will illuminate when the power supply is switched on.
- This LED bar light is not dimmable.
- The light is available in three color temperatures: 3000K (Warm White), 4000K (Neutral White), and 6000K (Cool White), depending on the model purchased.
Figure 4: Visual representation of 3000K (Warm White), 4000K (Neutral White), and 6000K (Cool White) light output.
4. Maintenance
- Cleaning: To clean the light bar, ensure it is disconnected from power. Wipe the surface gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture.
- Environment: This light is rated IP20 and is NOT waterproof. Use it only in dry indoor environments. Avoid exposure to water, high humidity, or extreme temperatures.
- No User-Serviceable Parts: The LED bar light contains no user-serviceable parts. Do not attempt to open or repair the unit, as this will void any potential warranty and may cause damage or injury.
5. Troubleshooting
If you encounter issues with your LED Cabinet Bar Light, please refer to the following common solutions:
- Light Does Not Turn On:
- Check if the DC12V power supply is properly connected and plugged into a working outlet.
- Ensure the power supply is switched on.
- Verify that the power supply is providing the correct 12V DC output.
- Check all connections for looseness or damage.
- Light Flickers:
- Ensure the power supply is stable and providing consistent 12V DC.
- Check for any loose connections between the light bar and the power supply.
- Verify that the power supply's wattage is sufficient for the length of the LED bar light.
If problems persist after trying these steps, please contact your retailer for further assistance.
6. Specifications
| Feature | Specification |
|---|---|
| Product Type | LED Cabinet Bar Light |
| Working Voltage | DC12V |
| Working Temperature | -20°C to 50°C |
| Color Temperature Options | 3000K (Warm White), 4000K (Neutral White), 6000K (Cool White) |
| Waterproof Grade | IP20 (Not waterproof) |
| Certifications | CE, RoHS |
| Lamp Beads | SMD 2835 |
| Material | Aluminum + PC lamp case |
| Body Color | Silver / Black |
| Available Lengths | 30cm, 40cm, 50cm |
| Power | 12W/meter |
| Luminous Flux | 60-249 Lumens |
| Dimmable | No |
| Batteries Included | No |
For more detailed specifications, please refer to the official product documentation or contact the seller.
7. User Tips
- Power Supply Matching: Always use a DC12V power supply that provides sufficient wattage for the total length of your LED bar lights. For example, if you have a 0.5m light (6W) and a 1m light (12W), you'd need at least an 18W power supply.
- Measure Before Installation: Before purchasing or installing, accurately measure the space where you intend to place the lights to ensure you select the correct length(s).
- Dry Environment: As the light is not waterproof (IP20), ensure it is installed in a consistently dry indoor location to prevent damage and ensure longevity.
8. Warranty and Support
For warranty information, terms, and conditions, please refer to the documentation provided at the time of purchase or contact your retailer directly. Support inquiries should also be directed to your point of purchase or the manufacturer's official support channels.