1. Important Safety Information
Your Responsibility:
By using this product, you acknowledge and accept the following essential safety conditions:
- Knowledge is Required: You must read and fully comprehend the entire instruction manual prior to operation. Retain it for all future users.
- Limits of Use: This is a household product. Any application not explicitly described in this manual is prohibited.
- Zero-Tolerance on Damage: A damaged product is unsafe. Do not attempt to use, modify, or repair it.
- User Eligibility: This product is for responsible adults (18+). Individuals whose capabilities may be impaired may only use it under the direct, responsible supervision of a person who fully understands all risks and procedures.
2. Product Overview
The Shunmaii Portable Strobe Warning Light is a versatile emergency lighting device designed for various situations, including roadside emergencies, camping, home power outages, and vehicle maintenance. It features a durable, waterproof design and a magnetic base for easy attachment.

Figure 2.1: Front view of the Portable Strobe Warning Light, designed for multipurpose emergency lighting.
Key Features:
- Multipurpose Use: Suitable for car, home, and camping emergencies.
- Durable & Waterproof: IP65 rated for use in rainy conditions.
- Magnetic Adsorption: Easily attaches to metal surfaces.
- High-Quality LED Wick: Provides bright and efficient illumination with a long service life.
- Portable Design: Compact and easy to carry.
- Power Options: Available in AAA battery-operated and USB rechargeable versions.

Figure 2.2: Icons representing key features: Endurance, Auto-Control, Magnet adsorption, Multipurpose, Portable, Vehicle use, Home Furnishing, and Camping.
3. Setup and Powering On
3.1 For AAA Battery Model:
- Locate the battery compartment cover on the bottom of the light.
- Twist or slide the cover to open it.
- Insert 3 AAA batteries (not included) according to the polarity markings (+/-) inside the compartment.
- Replace the battery compartment cover, ensuring it is securely closed.

Figure 3.1: Open battery compartment for inserting AAA batteries.
3.2 For USB Rechargeable Model:
- Locate the hidden charging port, typically on the side or bottom of the unit, often covered by a rubber flap for waterproofing.
- Open the rubber flap to expose the charging port.
- Connect the provided USB charging cable (if included) to the light and the other end to a standard USB power source (e.g., wall adapter, car charger, computer USB port).
- The light will indicate charging status (e.g., an indicator LED).
- Allow the unit to fully charge before first use.

Figure 3.2: Hidden charging port with internal battery, showing a USB cable connected for charging.
4. Operating Instructions
4.1 Powering On/Off and Mode Selection:
Press the power button (usually located on the side or top) to turn the light on. Subsequent presses may cycle through different lighting modes (e.g., steady on, strobe, flashing patterns). Press and hold the button to turn the light off.
4.2 Placement and Application:
- Magnetic Base: The light features a strong magnetic base. Attach it securely to any ferrous metal surface, such as a vehicle's body, metal poles, or equipment.
- Versatile Use:
- Roadside Emergency: Place the light on your vehicle's roof or trunk to alert other drivers.
- Camping: Use as a tent light, pathway marker, or signal light.
- Home/Workshop: Provides illumination during power outages or for working in dark areas.
- Vehicle Repair: Attach to the hood or chassis for hands-free lighting.

Figure 4.1: The light's wide range of applications, including camping, car breakdown, foggy conditions, and power failure.
5. Maintenance
- Cleaning: Wipe the exterior of the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the light in a cool, dry place away from direct sunlight when not in use.
- Battery Care (AAA Model): If the light will not be used for an extended period, remove the AAA batteries to prevent leakage and damage.
- Battery Care (Rechargeable Model): For optimal battery life, avoid completely draining the battery frequently. Recharge the unit periodically even if not in use to maintain battery health.
- Waterproofing: Ensure the rubber flap covering the charging port (if applicable) is securely closed to maintain the IP65 waterproof rating.

Figure 5.1: The light is IP65 waterproof, allowing for use in rainy conditions.
6. Troubleshooting
- Light Does Not Turn On:
- AAA Model: Check if batteries are inserted correctly with correct polarity. Replace with fresh batteries.
- Rechargeable Model: Ensure the unit is fully charged. Connect to a power source and allow it to charge for a few hours.
- Light is Dim:
- AAA Model: Batteries may be low. Replace with fresh batteries.
- Rechargeable Model: Battery charge is low. Recharge the unit.
- Light Flickers:
- AAA Model: Check battery contacts for corrosion or looseness. Clean if necessary. Replace batteries.
- Rechargeable Model: Battery may be nearing end of life or connection issue. Try fully recharging. If problem persists, contact support.
- Water Inside Unit: Discontinue use immediately. Ensure all seals and covers are properly closed before exposure to water.
7. Specifications
| Feature | Specification |
|---|---|
| Product Name | Portable Strobe Warning Light |
| Brand | Shunmaii |
| Body Material | Plastic |
| Product Color | Orange |
| Product Size | Approx. 9cm (3.54in) x 9cm (3.54in) x 4.5cm (1.77in) |
| Product Net Weight | Approx. 98g / 120g (depending on model) |
| Luminous Flux | 60-249 Lumens |
| Light Source | High-quality LED Wick |
| Power Source | Rechargeable Battery (USB) / AAA Batteries |
| Battery Type (Rechargeable) | 1 x 650mAh Polymer Lithium Battery (802040) |
| Battery Type (AAA Model) | 3 x AAA (not included) |
| Waterproof Rating | IP65 |
| Certifications | CE, FC, RoHS |
| Origin | Mainland China |
| Note | Without location function. |

Figure 7.1: Close-up view of the high-quality LED wick light source, designed for efficiency and long service life.
8. User Tips
- Verify Model: Upon receiving your product, carefully check whether you have received the AAA battery-operated model or the USB rechargeable model as ordered.
- Check Package Contents: If you ordered the USB rechargeable model, confirm if a USB charging cable is included in the package, as it may sometimes be sold separately.
- Emergency Preparedness: Always keep your warning light charged (rechargeable model) or with fresh batteries (AAA model) so it is ready for immediate use in an emergency.
- Secure Attachment: When using the magnetic base, ensure it is firmly attached to a clean, flat metal surface to prevent it from dislodging.
9. Warranty and Support
This product is manufactured by:
Guangzhou Aicai Technology Co., Ltd.
Room 709, No. 68, Gangwan Road
Huangpu District, Guangzhou
China
For any product-related inquiries, technical support, or warranty claims, please contact the seller or retailer from whom you purchased this product. Please retain your proof of purchase for warranty purposes.
Recycling Information: Please dispose of this product and its batteries responsibly according to local regulations. Do not dispose of with household waste.