Introduction
The XHORSE XSLR01EN LU.H Style XM38 Universal Smart Key is a versatile, blank remote key designed for use with XHORSE key programming tools such as the VVDI2 Key Programmer, VVDI MINI Key Tool, and VVDI Max. This manual provides detailed instructions for setting up, operating, and maintaining your XHORSE smart key, ensuring optimal performance and compatibility with various vehicle models, including Land Rover.

Safety Information
Please read and understand all safety precautions before using the XHORSE smart key and associated programming tools. Improper use can lead to damage to the device, vehicle, or personal injury.
- Always handle the key's circuit board with care to avoid electrostatic discharge.
- Ensure the correct battery type (CR2032, not included) is used for wireless and smart keys.
- Do not install a battery into wired remote keys, as they are powered via the programming tool.
- Keep the device and its components away from water, extreme temperatures, and direct sunlight.
- Only use official XHORSE programming tools and software for key generation and matching.
Setup Instructions
The XHORSE remote key requires generation using a compatible XHORSE key programmer tool. The process varies slightly depending on whether you are using a wireless or wired remote key.
1. Preparing the Key and Tool
- For Wireless/Super/Smart Remote Keys (e.g., XM38, XN Series, XE Series, XS Series):
- Carefully open the key casing.
- Install a CR2032 battery into the circuit board.
- Close the key cover securely.
- For Wired Remote Keys (e.g., XK Series):
- Extract the chip from the key.
- Connect the chip to one end of the cable provided with the Mini Key Tool.
- Insert the other end of the cable into the Mini Key Tool. Note: Do not install a battery into wired remote keys.
- Ensure your XHORSE programming tool (e.g., VVDI Mini Key Tool, VVDI2) is charged and ready.
- Download and install the Xhorse app on your mobile phone if using a Mini Key Tool or similar device that requires app connectivity.


Operating Instructions: Key Generation
Follow these steps to generate your XHORSE remote key using the VVDI Mini Key Tool and Xhorse app:
- Power on your VVDI Mini Key Tool.
- Open the Xhorse app on your mobile phone.
- Connect the Mini Key Tool to your phone via Bluetooth. The app should automatically recognize the device. Click 'Connect' if prompted.
- Place the prepared key (with battery for wireless/smart keys, or connected via cable for wired keys) into the groove of the Mini Key Tool.
- In the Xhorse app, navigate to the 'Vehicle Remote' section.
- Select the make and model of the vehicle for which you want to generate the key. The app will display compatible key types.
- Choose the appropriate key type (e.g., 'Wireless Remote' for XNDS00EN, 'Wired Remote' for XKB501EN).
- Click the 'Generate Remote' button in the app. The tool will begin generating the remote key.
- Once the generation process is complete (100%), the key is ready for vehicle matching.

Video Tutorial: Key Generation Process
Video demonstrating the process of generating a remote key using the XHORSE Mini Key Tool and Xhorse app, including battery installation and key generation for both wireless and wired remote keys.
2. Vehicle Matching (Programming)
After generating the remote key, it must be matched to your vehicle using appropriate OBD (On-Board Diagnostics) tools. This process typically involves:
- Connecting the OBD tool to your vehicle's diagnostic port.
- Following the specific instructions of your OBD tool for key programming, which may include steps like: entering central locking/decoder information, adjustment, and inputting channel numbers.
- Testing the remote functions (lock, unlock, trunk, etc.) after programming.
For specific vehicle models like Jeep Guide or Wrangler (433MHz), ensure you use a wireless remote with an NXP transponder and follow the OBD tool's learning procedure.
Maintenance
Battery Replacement (for Wireless/Super/Smart Keys)
The XHORSE XM38 smart key uses a CR2032 coin cell battery. If your key's remote functions become unreliable or stop working, the battery may need replacement.
- Carefully open the key casing using a small flat-head screwdriver or a specialized key opening tool.
- Locate the CR2032 battery on the circuit board.
- Gently remove the old battery.
- Insert a new CR2032 battery with the positive (+) side facing up.
- Close the key casing, ensuring it snaps securely into place.
- Test the key's remote functions.
Troubleshooting
If you encounter issues with your XHORSE smart key, consider the following common solutions:
- Key not generating: Ensure the key is correctly placed in the programming tool's groove (or properly wired for wired keys). Verify the Xhorse app is connected to the tool via Bluetooth and is up to date.
- Remote functions not working after programming: Check the battery (for wireless/smart keys). Re-verify the vehicle matching process with your OBD tool. Ensure the correct key type was selected during generation.
- App connectivity issues: Ensure Bluetooth is enabled on your phone and the Mini Key Tool. Restart both devices and try connecting again. Update the Xhorse app to the latest version.
- Key not recognized by vehicle: This indicates an issue with the vehicle matching (programming) process. Consult your vehicle's manual or a professional locksmith for assistance with OBD programming.
Specifications
| Feature | Specification |
|---|---|
| Model | XSLR01EN LU.H Style XM38 |
| Key Type | Universal Smart Key (Blank) |
| Buttons | 5 Buttons |
| Transponder | Yes |
| Product Size | 2.68 x 1.59 x 0.58 inches |
| Product Weight | 37g |
| Battery Model | CR2032 (Not included) |
| R/C Function | WITH |
| Customization | No |
| Origin | Mainland China |
| Package Length | 20 cm |
| Package Width | 14 cm |
| Package Height | 2 cm |
| Package Weight | 0.087 kg |
For a detailed user manual in PDF format, please refer to the Item guides & documents (PDF).
User Tips
- This key is highly versatile and compatible with a broad range of car models, including Land Rover and Jaguar lines, making it a valuable tool for professionals.
- Users have noted the excellent quality of materials, suggesting durability and reliability.
- Always ensure you have the correct XHORSE programming tool (e.g., VVDI2, VVDI Mini Key Tool) and the latest version of the Xhorse app for successful key generation.
Frequently Asked Questions (FAQ)
- Q: I am trying to send a command through the app, but it won't let me. What should I do?
- A: If you are experiencing issues sending commands through the Xhorse app, try the following: 1. Ensure your Mini Key Tool is properly connected via Bluetooth. 2. Check for any app updates and install them. 3. Restart both your phone and the Mini Key Tool. If the problem persists, contact XHORSE technical support.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official XHORSE website or contact your authorized XHORSE dealer. Keep your purchase receipt as proof of purchase for any warranty claims.