1. Safety Precautions
- Always use the provided power adapter. Improper adapters may cause fire, injury, or damage to the printer.
- Do not open the top cover or touch the print head immediately after printing, as it may be hot.
- Avoid using or storing the printer in areas with high temperatures, high humidity, or significant pollution.
- Ensure the printer's power adapter is connected to a properly grounded outlet. Avoid sharing outlets with large motors or devices that cause voltage fluctuations.
- Prevent water or conductive substances (like metal) from entering the printer. If this occurs, immediately turn off the power.
- Never print without paper, as this can severely damage the printing roller and thermal print head.
- Do not disassemble or modify the printer without authorization.
- For optimal printing quality and product longevity, use equivalent quality thermal paper.
2. Product Overview
2.1 Package Contents
Upon unboxing, please ensure all items are present:
- HZTZ Thermal Label Printer
- Power Adapter
- USB Cable
- Quick Start Guide / Instruction Manual
- Sample Labels (quantity may vary)

Image: Printer and accessories as packaged.
2.2 Printer Components

Image: Internal view of the printer showing Print Head, Paper Guide, Sensor, Rubber Roller, and Cover Release Button.

Image: Rear view of the printer showing Feed Button (top), Type-C Port, DC Power Input, and On/Off Switch.
3. Setup Guide
3.1 Paper Roll Installation
- Open the printer cover by pressing the Cover Release Button.
- Place the thermal paper roll into the paper loading compartment. Ensure the roll is oriented correctly (thermal side facing up for roll paper, or label side up for stacked paper).
- Pull out a short length of paper past the print head.
- Close the top cover firmly until it clicks into place.
3.2 Driver and Software Installation
Printer drivers and tools can be downloaded from: www.cnfujun.com/d/66
For Mac OS Users (USB Connection)
Note: Bluetooth connection is not supported on Mac systems for printing.
- Ensure the printer is turned on and connected to your Mac via the USB cable.
- Download the Mac driver package (e.g.,
LabelPrinter2.3.3.dmg) from the website. - Double-click the downloaded
.dmgfile to open it. - Follow the on-screen prompts: Click 'Continue', 'Install', and enter your computer's local password if prompted.
- Once the installation is successful, click 'Close'.
- Add Printer: Go to 'System Settings' (or 'System Preferences'), then 'Printers & Scanners'.
- Click the '+' (Add Printer, Scanner, or Fax) button.
- Select 'LABEL-9X00' (or similar name) from the list. The system should automatically identify and add it. Click 'Add' to complete.
For Windows OS Users
- Download the Windows driver package (e.g.,
LabelDriver.exe) from the website. - Double-click the
LabelDriver.exefile to start the installation. - Follow the on-screen prompts. When asked to select the connection type, choose one of the following:
- USB Port Connection: Select 'USB Port' and click 'Next'. Ensure the printer is powered on and connected via USB.
- Bluetooth Port Connection: Select 'Bluetooth Port' and click 'Next'. Ensure your computer's Bluetooth is on. The installer will search for nearby devices. Select 'Bluetooth Printer' (or similar) and connect. The default pairing code is '1234'.
- Network or Wi-Fi Port Connection: Select 'Network or Wi-Fi Port' and click 'Next'. The installer will detect available network printers. Select your printer from the list.
- Continue through the installation steps, accepting defaults for printer name and model.
- If prompted by Windows Security, click 'Install'.
- Upon successful installation, a test page may print automatically. Click 'Close' to finish.
For iOS and Android Users
Download the dedicated printing app from your device's app store or by scanning the QR codes provided on the driver download website. The app allows for printing PDFs and labels directly from your mobile device via Bluetooth.

Image: Printer highlighting USB and Bluetooth connectivity, compatible with Apple iOS and Android devices.
4. Operating Instructions
4.1 Printing a Label
- Ensure the printer is powered on and connected to your device (PC via USB/Bluetooth/Network, or mobile via Bluetooth).
- Open the document or label design you wish to print in your chosen software (e.g., PDF viewer, label design software, shipping platform).
- Go to 'File' > 'Print'.
- Select your HZTZ Thermal Label Printer from the list of available printers.
- In the print settings, ensure the paper size matches your label dimensions (e.g., 4x6 inch or 100mm x 150mm). Adjust print density and speed as needed for optimal quality.
- Click 'Print'.
Video: Demonstration of printing various label types, including round, square, and barcode labels.
4.2 Label Calibration
If the printer skips labels, prints continuously without stopping, or has incorrect label positioning, calibration is required.
- Ensure paper is loaded correctly in the printer.
- Power on the printer. When the power light is on, press and hold the 'FEED' button for 5-6 seconds.
- Release the 'FEED' button when the LED light flashes and the buzzer beeps.
- Restart the printer and print a test label to verify calibration.
Troubleshooting Calibration Issues:
- With paper, but printer reports error: Remove paper, power off the printer, then power it on. When the red light flashes, long press 'FEED' until the red light flashes again and the buzzer beeps. Wait 2 seconds, then restart and test.
- Without paper, but printer doesn't report error: Remove paper, power on the printer. Press and hold 'FEED' for 5-8 seconds until the red light flashes and the buzzer beeps twice. Release, then restart and test.
5. Maintenance
5.1 Cleaning the Print Head
Clean the print head if printing is unclear, vertical columns are missing, paper feeding is noisy, or there is excessive carbon buildup.
- Turn off the printer power. Open the top cover and remove any paper.
- If you have just finished printing, allow the print head to cool down completely.
- Use a soft cotton cloth lightly dampened with absolute ethanol (ensure it's wrung out) to gently wipe away dust and stains from the surface of the thermal sensor on the print head.
- Wait for the ethanol to completely evaporate before closing the cover and attempting to print again.
Important Notes for Cleaning:
- Always turn off the printer during maintenance.
- Do not touch the print head surface with bare hands or metal objects. Avoid using tweezers or other tools that could scratch the print head, printing roller, or sensor.
- Do not use organic solvents like gasoline or acetone.
6. Troubleshooting
- Printer not responding: Check power connection, USB/Bluetooth/Network connection, and ensure the printer is turned on. Restart both the printer and your computer/device.
- Poor print quality: Ensure you are using thermal labels. Clean the print head as described in the Maintenance section. Adjust print density settings in your printing software.
- Labels skipping or misfeeding: Perform label calibration as described in the Operating Instructions. Ensure labels are loaded correctly and the paper guides are adjusted to fit the label width.
- Driver not installing: Ensure you have downloaded the correct driver for your operating system from the official website. Temporarily disable antivirus software if it interferes with installation.
7. Specifications
| Feature | Specification |
|---|---|
| Model | 9260BT |
| Print Technology | Thermal Printer |
| Resolution | 203 DPI |
| Print Speed | Up to 160 mm/s (20 ppm) |
| Max Paper Size | 110mm (4x6 inch) |
| Interface Type | Bluetooth, USB (Type-C Port) |
| Network Printing | Wired/Wireless Supported |
| Paper Feed Mode | Friction Feed |
| Double-sided Printing | No |
| Dimensions (L x W x H) | 180mm x 78mm x 75mm (7.4 x 3.07 x 2.95 inches) |

Image: Diagram showing product dimensions.
8. User Tips
- For Mac users, ensure you use the USB connection for driver installation and printing, as Bluetooth is not supported for Mac OS.
- The sample labels included in the package can be helpful for initial setup and testing.
- When purchasing labels, ensure they are thermal labels compatible with the printer's maximum paper size (110mm or 4x6 inches).
- Keep the driver download website handy for future updates or troubleshooting.
9. Warranty and Support
For detailed warranty information and further technical support, please refer to the official user manual PDF available for download:
You may also find additional support resources on the product's official support page or by contacting the seller directly.