1. Product Overview
The IKSLED Mini PIR Motion Sensor is designed for automatic light control based on human body or pet movement. It features a compact design and is available in two main models, PIR20 and PIR21, each with specific operational characteristics to suit various applications. This sensor is ideal for energy-saving lighting solutions in various environments.

Model Variations
The sensor comes in two primary styles, PIR20 and PIR21, offering different activation modes:
- PIR20 (Module A): Operates 24/7, detecting motion regardless of ambient light conditions.
- PIR21 (Module B): Activated at night only, incorporating a twilight sensor to function only in low-light conditions.

2. Specifications
| Feature | Specification |
|---|---|
| Model Numbers | PIR Sensor (PIR 20, PIR 21) |
| Working Voltage | DC 3.7V, 5V, 12V, 24V |
| Current | 3A |
| Maximum Load | 3.7V > 7W, 5V > 12W, 12V > 36W, 24V > 48W |
| Detection Angle | 120 degrees |
| Detection Range | 3-4 meters (up to 6 meters, also related to temperature) |
| Delay Time | Approximately 30 seconds (resets with continuous motion) |
| Hole Size (PIR20) | 20mm |
| Hole Size (PIR21) | 21mm |
| Certification | CE |
| Origin | Mainland China |
| Warranty | 1 Year |
| Package Dimensions | 18cm (L) x 14cm (W) x 3cm (H) |
| Package Weight | 0.028 kg |

3. Setup
WARNING: Please strictly follow the instructions and safety tips. Use the product with caution.
Wiring Instructions
Refer to the wiring diagram below and ensure connections match your specific model and load requirements. The input voltage must be a constant voltage power supply DC3.7-24V (e.g., 12V 4A, 24V 2A).

Wiring Details:
- V+ (Red wire): Connect to the positive (+) terminal of your DC power supply.
- V- (Black wire): Connect to the negative (-) terminal of your DC power supply.
- LED+ (Yellow wire): Connect to the positive (+) terminal of your LED lamps/load.
- LED- (Blue wire): Connect to the negative (-) terminal of your LED lamps/load.
Important Note: Induction switches are not suitable for controlling motors, solenoid valves, solar lights, constant current lamps, or other similar equipment.
4. Operating Instructions
The IKSLED Mini PIR Motion Sensor is designed for automatic lighting control. When a person or pet is detected within its sensing range, the connected light will turn on. After the person leaves the sensing area, the light will turn off after approximately 30 seconds. If continuous motion is detected within the sensing area, the delay time will be extended indefinitely, keeping the light on.

Sensing Characteristics
- Sensing Angle: 120 degrees.
- Sensing Distance: Typically 3-4 meters, but can extend up to 6 meters. This range can be influenced by environmental factors such as temperature.
- Induction Delay: Approximately 30 seconds. The light remains on as long as motion is detected within the sensing area.
5. Maintenance
The IKSLED Mini PIR Motion Sensor requires minimal maintenance. To ensure optimal performance:
- Keep the sensor lens clean and free from dust or obstructions. Use a soft, dry cloth for cleaning.
- Avoid placing the sensor in areas with direct sunlight, strong air currents, or rapid temperature changes, as these can affect its detection accuracy.
- Ensure the sensor is securely mounted and its wiring connections remain stable.
6. Troubleshooting
Light Remains On or Off, Switch Cannot Be Controlled
If the connected light remains continuously on or off and the sensor does not respond to motion, there are three common reasons:
- Mismatch of Working Voltage: The power adapter voltage or the LED light voltage does not match the sensor's requirements.
- Input/Output and Positive/Negative Poles are Reversed: Incorrect wiring polarity.
- Continuous Motion in Sensing Area: During testing or normal operation, if there is constant movement within the sensor's range, the light will remain on.
Resolutions:
- 1. Confirm Voltage Compatibility: First, verify that your power adapter provides a constant voltage (DC3.7V, 5V, 12V, or 24V) and that your LED light is compatible with the same DC voltage (DC3V, 3.7V, 5V, 12V, or 24V).
- 2. Check Wiring Polarity: Inspect the input/output connections to ensure that positive (+) and negative (-) poles are connected correctly as per the wiring diagram (Figure 4). If reversed, correct the connections.
- 3. Test in a Controlled Environment: If the model has a lens, it must be covered with the white lens cap during initial testing to prevent false triggers from a large sensing range. Then, use an object to cover the induction switch for testing. The light should turn off after 30 seconds if no motion is sensed.

7. User Tips
- Model Selection: Carefully choose between the PIR20 (24/7 operation) and PIR21 (night-only operation with integrated twilight sensor) based on your specific application needs.
- Optimal Placement: For best performance, install the sensor in a location where its 120-degree detection angle can cover the desired area without obstructions. Avoid placing it near heat sources or in direct sunlight, which can interfere with its infrared detection.
- Testing: When testing, especially for the PIR21 model, ensure ambient light conditions are appropriate for its night-only activation. For any model, if the light stays on, try covering the sensor lens to simulate no motion and check if it turns off after the delay.
8. Warranty and Support
This IKSLED Mini PIR Motion Sensor comes with a 1-Year Warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For further assistance or detailed documentation, you may refer to the official user manual PDF available online. A link to the user manual (PDF) can be found on the product's description page or by searching for 'IKSLED Mini PIR Motion Sensor User Manual' on the manufacturer's website.
For technical support, please contact your retailer or the manufacturer directly.