1. Introduction
Thank you for choosing the HYULIGHTS 180W LED Moving Head Light. This device is a powerful and versatile lighting solution. For your safety and to ensure correct installation, operation, and maintenance, please read this user manual carefully before installing the device.
Installation and operation should be performed by a qualified technician following these instructions strictly.
CAUTION!
Keep this device away from rain and moisture!
CAUTION!
Unplug the mains lead before opening the housing.
Every person involved with the installation, operation, and maintenance of this device must be qualified and follow the instructions in this manual carefully.
Unpacking
Upon unpacking the device, you should find the following items:
- One power cable
- One user manual
- One moving head light unit
- One DMX cable
- One Omega bracket
Please check carefully for any damage caused during transportation. If any damage is found, please consult your dealer and do not install the device.
2. Setup and Installation
Mounting Points
Overhead mounting requires extensive experience, including calculating working load limits and a fine knowledge of installation materials. Periodic safety inspections of all installation materials and the fixture are crucial. Do not attempt installation yourself if you lack these qualifications, as improper installation can result in bodily injury.
For added protection, mount the fixture in areas outside walking paths, seating areas, or areas where the fixture might be reached by unauthorized personnel.
Before mounting the fixture to any surface, ensure the installation area can support a minimum point load of 10 times the device's weight. Fixture installation must always be secured with a secondary safety attachment, such as an appropriate safety cable.
Never stand directly below the device when mounting, removing, or servicing the fixture from a ceiling, or when it is set on a flat level surface. Ensure this fixture is kept at least 0.5m (1.5ft) away from any flammable materials (decoration, etc.).
Clamp Mounting
The LED moving head provides a unique mounting bracket assembly that integrates the bottom of the base, the included 'omega bracket', and the safety cable rigging point in one unit.

DMX-512 Control Connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the moving head. You can chain multiple moving heads together through serial linking. The cable needed should be a two-core, screened cable with XLR input and output connectors.

3. Operating Instructions
Control Panel: LED Display Screen
The device features an LED display screen for control and configuration. Use the navigation buttons (Up, Down, Left, Right, OK) to navigate through the menus and adjust settings.
Menu Instructions
The control panel offers several menu options for configuring the light:
- Setting:
- **Running mode:** Select between DMX mode (14 channels), Sound control mode, Auto mode (1-4 demonstration programs), or Random mode. The light can act as a host for other lights in Sound, Auto, and Random modes.
- **Address code:** Set the DMX address from 1-512.
- **Channel mode:** Set the DMX channel to 14 channels.
- **Sound Sensitivity:** Adjust sound sensitivity from 1-99.
- **Pan reverse / Tilt reverse:** Reverse the Pan or Tilt movement.
- **Pan/Tilt exchanges:** Swap Pan and Tilt functions.
- **Code wheel:** Enable or disable the encoding Code wheel correction function.
- **Signal timeout:** Configure the light's behavior (maintain or cut light) when the host signal is disconnected.
- **Screen Saver:** Enable or disable the screen saver.
- **Colour Smooth:** Enable or disable color smoothing.
- **Restore factory settings:** Restore all settings to their default values.
- Test mode: Allows testing individual channels. The initial value changes based on the self-take mode or console mode.
- Offset: Adjust offsets for various parameters:
- Pan Set offset
- Tilt offset
- Color offset
- Gobo offset
- Focus offset
- Magnification lens & 7-Color wheel offset
- Advance:
- **Language switch:** Switch menu language between Chinese and English.
- **Screen Reverse display:** Switch the display direction of the screen.
- **Hours Clear:** Clears the total time of use.
- **Top Protection temperature:** If the internal temperature exceeds the set protection temperature, the brightness will decrease to prevent damage.
- Hardware: Displays information about hardware components such as Pan Hall, Tilt Hall, Colour Hall, Gobo Hall, Gobo 2 Hall, Hall 7, Pan Code Hall wheel, Pan steps, Tilt Code Hall wheel.
- SysInfo (System Information): Displays version, lighting use time, total time of use, turning on time, and current temperature.
DMX Channels (14 Channels)
The following table details the DMX channel assignments and their functions:
| Channel | Function | Channel S (Value Range) | Explanation |
|---|---|---|---|
| 1 | Dimmer | 0-255 | Dimmer 0-255 |
| 2 | Strobe | 0-10 11-255 | No Strobe From slow to fast Strobe |
| 3 | Pan | 0-255 | Pan |
| 4 | Pan fine | 0-255 | 16bit Pan fine |
| 5 | Tilt | 0-255 | Tilt |
| 6 | Tilt fine | 0-255 | 16bit Tilt fine |
| 7 | Pan Tilt speed | 0-255 | Pan Tilt Speed adjustment |
| 8 | Color | 0-4 | White |
| 5-9 | White light + color 1 | ||
| 10-14 | Color 1 | ||
| 15-19 | Color 1+ color 2 | ||
| 20-24 | Color 2 | ||
| 25-29 | Color 2+ color 3 | ||
| 30-34 | Color 3 | ||
| 35-39 | Color 3+ color 4 | ||
| 40-44 | Color 4 | ||
| 45-49 | Color 4+color 5 | ||
| 50-54 | Color 5 | ||
| 55-59 | Color 5+ color 6 | ||
| 60-64 | Color 6 | ||
| 65-69 | Color 6+ color 7 | ||
| 70-74 | Color 7 | ||
| 75-79 | Color 7+ color 8 | ||
| 80-84 | Color 8 | ||
| 85-89 | Color 8+ color 9 | ||
| 9 | GOBO | 90-94 | Color 9 |
| 95-99 | Color 9+ color 10 | ||
| 100-104 | Color 10 | ||
| 105-109 | Color 10+ color 11 | ||
| 110-104 | Color 11 | ||
| 115-119 | Color 11+White | ||
| 120-200 | Color clockwise fast to slow | ||
| 201-255 | Color clockwise slowly to fast | ||
| 0-5 | White | ||
| 6-10 | Gobo 1 | ||
| 11-15 | Gobo 2 | ||
| 16-20 | Gobo 3 | ||
| 21-25 | Gobo 4 | ||
| 26-30 | Gobo 5 | ||
| 31-35 | Gobo 6 | ||
| 36-40 | Gobo 7 | ||
| 41-45 | Gobo 8 | ||
| 46-50 | Gobo 9 | ||
| 10 | Focus | 0-255 | Focus |
| 0-127 | off | ||
| 11 | Magnification lens & 7-Color wheel | 128-191 | Magnification lens |
| 192-255 | 7-Color wheel | ||
| 0-127 | off | ||
| 12 | Prism | 128-136 | 24 Prism |
| 137-255 | Prism is slow to fast rotate | ||
| 13 | Macro function | 0-5 | NO effect |
| 6-55 | Auto 1 | ||
| 56-105 | Auto 2 | ||
| 106-155 | Auto 3 | ||
| 156-205 | Auto 4 | ||
| 206-255 | Random mode | ||
| 14 | Restoration | 0-25 | NO effect |
4. Technical Specifications
| Feature | Specification |
|---|---|
| Voltage | AC110-240V 50-60Hz |
| Light source | 180W White LED |
| Total power | 200W |
| Control panel | LED Display Screen |
| Pan scan | 540° (16bit) Electric correction |
| Tilt scan | 270° (16bit) Electric correction |
| Color wheel | 11 Colors + Half color effect + Color rotating speed. Infinite rotating |
| Gobo wheel | 14 Gobos + Shake + Gobo Rotating speed. Infinite rotating |
| Prism | 1pcs 24 Rotating prisms |
| Lens | 1PCS 6 X Magnification lens, 1PCS 7-Color wheel |
| Beam zoom angle | 1.5° - 15° |
| Functions | Sound control, Auto, Master/Slave, DMX 512, RDM |
| Strobe | 25 times/sec |
| DMX channel | 14 channels |
| Dimmer | 0-100% With regulated constant color control |
| Net Weight (N.W) | 6.7 KG |
| Gross Weight (G.W) | 7.8 KG |
| Packing size | 41*28*27.5cm |
| Is Bulbs Included | Yes |
| Power Source | AC |
| Luminous Flux | 2000-82000 |
| High-concerned chemical | None |
| Installation Method | self-contained |
| Certification | CE, FCC, RoHS, UL, WEEE, NONE |
| Item Type | Stage Lighting Effect |
| Occasion | Professional Stage & DJ |
| Origin | Mainland China |
5. Maintenance
To ensure the longevity and optimal performance of your HYULIGHTS Moving Head Light, regular maintenance is recommended. This includes:
- Cleaning: Periodically clean the exterior of the device, especially the lens and ventilation openings, to prevent dust buildup which can affect performance and lead to overheating. Use a soft, dry cloth.
- Inspection: Regularly inspect all cables, connections, and mounting hardware for any signs of wear, damage, or looseness. Ensure all safety attachments are securely in place.
- Software/Firmware: Keep track of any available software or firmware updates from the manufacturer to ensure your device has the latest features and bug fixes.
- Professional Servicing: For any internal repairs or complex issues, always consult a qualified technician.
6. Troubleshooting
This section provides guidance on common issues you might encounter with your moving head light.
- No Light Output:
- Check the power connection and ensure the device is receiving power.
- Verify that the dimmer channel is not set to 0% in DMX mode.
- If the internal temperature exceeds the protection limit, the brightness may automatically decrease. Allow the unit to cool down.
- No Movement / Incorrect Movement:
- Ensure DMX cables are correctly connected and the DMX address is set properly.
- Check Pan/Tilt reverse and exchange settings in the menu.
- Perform a reset (Motor reset, XY Motor reset, or Completely reset) via DMX channel 14 (values 26-76, 77-127, 128-255 respectively).
- Signal Timeout: If the DMX signal is lost, the light can be configured to either maintain its last state or cut the light. Check the 'Signal timeout' setting in the menu.
- Display Issues: If the display is not showing correctly, check the 'Screen Reverse display' setting.
If you encounter any issues not covered here, please contact customer support.
7. User Tips
- This product achieves the best results when used with a smoke machine to enhance beam visibility.
- The fans can be a bit noisy, which is normal for this type of powerful lighting equipment.
- The light offers very nice and powerful effects, making it a great value for its quality.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your vendor or the manufacturer directly. Please have your model number (HYU-150B) and purchase details ready when contacting support.
You can find additional guides and documents, including a PDF user manual, by referencing the original product listing or contacting the seller.