Introduction
Thank you for choosing the VILCORN RGB Wireless Gamepad. This manual provides detailed instructions to help you operate and maintain your device correctly, ensuring optimal performance and longevity. Please read this manual thoroughly before use.
Important Notes:
- All images, descriptions, and text information in this manual are for reference only. Please refer to the actual product.
- Product features and services may vary depending on the device, software, or service provider.
- Always charge the controller fully before its first use.
- Content may be updated without prior notice. The company reserves the right of final interpretation.
Product Overview
The VILCORN RGB Wireless Gamepad is designed for multi-platform compatibility, offering an enhanced gaming experience across various devices.
Specifications
| Feature | Specification |
|---|---|
| Product Name | SWITCH Wireless Controller |
| Product Model | SZ-933B |
| Battery | 3.7V 800 mAh Li-Battery |
| Axis Sensor | 6-axis Gyro Sensor |
| Charging Voltage | DC 5V |
| Operating Voltage & Current | 3V & ≈25-100mA |
| Charging Current | ≈500mA |
| Static Operating Current | <10µA |
| Charging Time | ≈2.5 hours |
| Operating Distance | 6 meters |
| Package Length | 16 cm |
| Package Width | 12 cm |
| Package Height | 7 cm |
| Package Weight | 0.315 kg |
Setup and Connection
Charging the Controller
Before first use, ensure the controller is fully charged. Connect the included USB cable to the controller and a DC 5V power source. The LED indicators (LED1-LED4) will slowly flash during charging and turn off once fully charged.
Pairing Instructions
The controller supports various connection modes. Please follow the steps below for your specific device.
1. Bluetooth Switch Mode
- Turn on your Switch console. From the Home screen, click the [System Settings] button.
- Navigate to [Controllers and Sensors] and then select [Controller Connection (Bluetooth)] to turn on Bluetooth. Ensure Airplane Mode is OFF.
- On the Switch Home screen, go to [Controllers] and select [Change Grip/Order]. The console will automatically search for controllers.
- On the gamepad, press and hold the [Home + Y] buttons for 3 seconds. LEDs 1-4 will flash rapidly.
- Once successfully paired, the corresponding channel indicator LED on the controller will light up steadily.
2. Bluetooth Android Mode
- With the controller powered off, press and hold the [Home + A] buttons for 3 seconds. LEDs 2-3 will flash rapidly.
- On your Android device, turn on Bluetooth, search for "Gamepad" in the available devices list, and click to connect.
- Upon successful pairing, LEDs 2-3 on the controller will light up steadily.
Note: In Android mode, the controller does not support vibration or axis functions.
3. Bluetooth iOS Mode
- With the controller powered off, press and hold the [Home + X] buttons for 3 seconds. LEDs 1-4 will flash rapidly.
- On your iOS device, turn on Bluetooth, search for "Xbox Wireless Controller" in the available devices list, and click to connect.
- Upon successful pairing, LEDs 1-4 on the controller will light up steadily.
Note: Your iOS device system must be version 13.0 or higher. In this mode, the controller does not support vibration or axis functions.
4. Bluetooth PC (X-INPUT) Mode
- With the controller powered off, press and hold the [Home + X] buttons for 3 seconds. LEDs 1-4 will flash rapidly.
- On your PC, turn on Bluetooth, search for "Xbox Wireless Controller" in the available devices list, and click to connect.
- Upon successful pairing, LEDs 1-4 on the controller will light up steadily. The controller will enter X-INPUT mode and can be used directly with Windows 10 systems and above.
5. USB Mode (Wired Connection)
- With the controller powered off, connect it to your PC's USB port using the data cable.
- The controller will be automatically recognized as X-INPUT mode (default mode), and LEDs 1-4 will light up.
- To switch to D-INPUT controller mode, press and hold the [-] + [+] buttons for 3 seconds in PC X-INPUT mode. LEDs 2-3 will light up.
- If connecting to a Switch console via USB, ensure the "Pro Controller Wired Communication" option is enabled in the Switch System Settings.
Operating Instructions
1. TURBO Speed Adjustment
The TURBO function allows for rapid-fire actions. There are three speed settings: 5Hz, 10Hz, and 15Hz.
- Setting TURBO: Hold the [TURBO] key and press the desired action button (A, B, X, Y, L, ZL, R, ZR).
- Setting Auto TURBO: Repeat the above step.
- Canceling TURBO: Repeat the setting process again for the specific button.
- Adjusting TURBO Speed:
- Hold [TURBO] + push the Right 3D Rocker UP: Increases rapid-fire speed by one gear.
- Hold [TURBO] + push the Right 3D Rocker DOWN: Decreases rapid-fire speed by one gear. (Default is middle gear).
2. Motor Vibration Intensity Adjustment
The controller features 4 levels of vibration intensity (100%, 75%, 50%, 0%) with a memory function.
- Hold [TURBO] + push the Left 3D Rocker UP: Increases motor vibration intensity.
- Hold [TURBO] + push the Left 3D Rocker DOWN: Decreases motor vibration intensity.
3. RGB Lighting Effects
The controller features adjustable RGB backlighting with various modes and brightness levels. Settings are saved automatically.
- Switch Light Mode: Short press [LIGHT] + [R3] (Right 3D Rocker Down) simultaneously to cycle through modes: Dazzling Light, Single Color Steady, Single Color Breathing, Single Color Cycle Breathing.
- Pause/Save Dazzling Light Mode: Short press [LIGHT] + [L3] (Left 3D Rocker Down) simultaneously. Press again to resume.
- Change Color (Single Color Steady/Breathing Mode): Short press [LIGHT] + [L3] (Left 3D Rocker Down) simultaneously.
- Pause/Save Single Color Cycle Breathing Mode: Short press [LIGHT] + [L3] (Left 3D Rocker Down) simultaneously. Press again to resume.
- Adjust Brightness: Short press [LIGHT] + [Up Arrow] or [LIGHT] + [Down Arrow] simultaneously to adjust brightness by one gear. Up increases, Down decreases.
- Turn RGB Light On/Off: Long press the [LIGHT] button for 5 seconds.
4. Wake-up and Reconnection Function
- Press the [HOME] button for 1 second to wake up the controller and reconnect to the console. This will also wake up a sleeping Switch console.
- If the connection fails within 15 seconds, the controller will automatically enter sleep mode.
- The controller has a mode memory function, allowing it to reconnect to the last saved mode upon waking.
5. Automatic Sleep / Power On / Off
- The controller will automatically enter sleep mode if the console screen is closed.
- If there is no button or sensor input for 5 minutes, the controller will automatically enter sleep mode.
- In Bluetooth mode, long press the [HOME] button for 5 seconds to power off the controller.
Calibration
1. 3D Joystick Calibration
If you experience issues with the left or right 3D joysticks, you can calibrate them via the console.
- Access the 3D joystick calibration interface on your console (refer to your console's system settings for "Controllers and Sensors" or "Calibrate Control Sticks").
- Follow the on-screen instructions to complete the calibration actions.
- Once the console displays "Calibration complete", the process is finished.
2. 6-Axis Gyro Sensor Calibration
If the controller's 6-axis gyro sensor exhibits abnormal behavior, it can be restored to normal operation through calibration.
Method 1 (Via Console):
- While connected, access the sensor calibration interface on your console (e.g., "Calibrate Motion Controls").
- Place the controller flat on a level surface and press the [+] or [-] key.
- When the console indicates completion, the calibration is finished.
Method 2 (Direct Calibration):
- With the controller powered off, press and hold the [A] + [-] + [HOME] buttons simultaneously for 3 seconds to turn on the controller.
- The front and rear indicator lights will flash.
- Press the [+] key again. The LED lights will turn off, indicating that the calibration is complete.
Troubleshooting
1. Low Voltage Alarm
- When the controller's battery is low, the current mode indicator will flash rapidly.
- If you continue to use the controller until the voltage drops below a certain value, the controller will automatically enter sleep mode to prevent damage.
2. Button Test
If any buttons on the controller are unresponsive or malfunctioning, you can test their functionality using the console's button test option (refer to your console's system settings for "Test Input Devices" or "Test Controller Buttons").
3. Reset Function
If the controller's functions become abnormal or it stops responding, you can reset it by pressing the reset button located at the bottom of the controller.
User Tips
- For optimal performance, ensure your controller's firmware is up to date. Check the manufacturer's website for any available updates.
- When switching between different devices, it's often helpful to fully disconnect the controller from the previous device's Bluetooth settings before attempting to pair with a new one.
- If experiencing input lag, try moving closer to your console or PC to ensure a strong Bluetooth connection.
Support
For further assistance or detailed diagrams, you may refer to the official user manual PDF available at: VILCORN Gamepad User Manual (PDF).
If you encounter any issues not covered in this manual, please contact VILCORN customer support for assistance.