Tuya Window Door Sensor

Contents

Tuya ZigBee Door Window Sensor User Manual

Model: Window Door Sensor

1. Important Safety Warnings

Read and understand all instructions in this manual before using the product. Keep these instructions for future reference and pass them on to any subsequent user.

This product is intended for household use only. Use it only as described in this manual. Do not use the product if it is damaged in any way.

This product is intended for use by persons aged 18 years and above. It may be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge only if they have been given supervision or instruction and understand the hazards involved.

2. Product Overview

The Tuya ZigBee Door Window Sensor is a smart security device designed to detect the opening and closing status of doors and windows. It integrates with the Tuya smart home platform via a ZigBee gateway, providing real-time alerts and remote monitoring capabilities to your smartphone. The sensor features a USB power supply option for continuous operation and an anti-dismantle function for enhanced security.

ZigBee Door Sensor Key Features
Figure 2.1: ZigBee Door Sensor Key Features: Detecting status of doors/windows, USB power supply, Anti-dismantle function. Powered by Tuya, ZigBee Alliance.
Front view of the ZigBee Door Window Sensor
Figure 2.2: Front view of the ZigBee Door Window Sensor.

3. Setup

3.1 Package Contents

  • Main Sensor Unit
  • Magnetic Strip
  • USB Cable (for power)
  • User Manual (this document)

3.2 Prerequisites

  • A compatible ZigBee gateway (required for operation).
  • Tuya Smart APP installed on your smartphone.
  • Stable 2.4GHz Wi-Fi network (for the ZigBee gateway).

3.3 Component Identification

Product Diagram and Dimensions
Figure 3.1: Product Diagram and Dimensions. Shows the main unit (82x50x16mm) and magnet (27x23x13mm), internal components including battery, USB port, reset button, LED indicator, and tamper probe.

Refer to Figure 3.1 for the location of the following components:

  • Main Unit: Contains the electronics, USB port, LED indicator, reset button, and tamper probe.
  • Magnetic Strip: The smaller component that triggers the sensor when separated from the main unit.
  • USB Port: For connecting the USB power supply.
  • Reset Button: Used for pairing and resetting the device.
  • LED Indicator: Provides status feedback.
  • Tamper Probe: Detects if the main unit is being disassembled.

3.4 Installation Steps

  1. Power Supply: Connect the main sensor unit to a USB power source using the provided cable for continuous operation. The device also contains a backup battery.
  2. Mounting: Choose a clean, dry surface on your door or window frame. Ensure the main unit and the magnetic strip are aligned and placed within 10-15mm of each other when the door/window is closed. Use the adhesive backing or screws (not included) to secure both parts.
  3. Pairing with ZigBee Gateway:
    1. Ensure your ZigBee gateway is powered on and connected to the Tuya Smart APP.
    2. Open the Tuya Smart APP and select your ZigBee gateway.
    3. Follow the in-app instructions to add a new sub-device.
    4. Press and hold the reset button on the sensor until the LED indicator starts blinking, indicating it's in pairing mode.
    5. Once successfully paired, the LED indicator will stop blinking, and the device will appear in your Tuya Smart APP.
  4. Testing: Open and close the door/window to verify that the sensor detects the change in status and sends notifications to your smartphone via the Tuya Smart APP.
Smart Home Integration
Figure 3.2: Smart Home Integration: Detects door/window status and sends alerts to your smartphone.

4. Operating Instructions

4.1 Door/Window Status Detection

The sensor continuously monitors the proximity between its main unit and the magnetic strip. When the door or window is opened, separating the two parts, the sensor detects this change and transmits the status to your ZigBee gateway and subsequently to the Tuya Smart APP.

4.2 APP Remote Control and Notifications

Through the Tuya Smart APP, you can:

  • View the real-time open/closed status of your doors and windows from anywhere.
  • Receive instant push notifications on your smartphone when a door or window is opened or closed.
  • Set up automation routines (e.g., turn on lights when a door opens) in conjunction with other Tuya-compatible devices.
APP Remote Control
Figure 4.1: APP Remote Control: Manage your home security from anywhere. Note: Requires a ZigBee gateway.

4.3 Anti-Dismantle Function

The sensor is equipped with an anti-dismantle (tamper) function. If the main unit is forcibly removed or tampered with, it will trigger an alarm and send a notification to your smartphone, providing an additional layer of security.

Anti-dismantle Function
Figure 4.2: Anti-dismantle Function: Pushes an alarm notification to your smartphone if the sensor is tampered with or disassembled.

5. Maintenance

5.1 Cleaning

Wipe the sensor with a soft, dry cloth. Do not use liquid cleaners or aerosols, as they may damage the device.

5.2 Power Supply

The sensor is primarily designed for USB power supply, ensuring long-term, uninterrupted operation. It also includes a backup battery. While the specific battery type is not detailed, if the device stops functioning without USB power, the internal battery may need replacement. Refer to Figure 3.1 for the battery compartment location.

USB Power Supply
Figure 5.1: USB Power Supply: Provides long-term power, eliminating concerns about power outages. Includes backup battery.

6. Troubleshooting

  • Sensor not responding:
    • Check if the USB power cable is securely connected.
    • Ensure the ZigBee gateway is powered on and connected to the internet.
    • Verify the sensor is within range of the ZigBee gateway.
    • Try resetting the sensor by pressing the reset button and re-pairing it with the gateway.
  • No notifications on smartphone:
    • Check your smartphone's notification settings for the Tuya Smart APP.
    • Ensure your smartphone has an active internet connection.
    • Verify the ZigBee gateway is online and communicating with the Tuya cloud.
  • False alarms:
    • Ensure the main unit and magnetic strip are securely mounted and do not shift.
    • Check that the gap between the main unit and magnetic strip is appropriate (typically less than 15mm when closed).
  • LED indicator behavior:
    • If the LED is not lighting up during pairing, ensure the device has power.
    • A rapidly blinking LED usually indicates pairing mode.
    • A solid LED or no LED activity after pairing typically indicates successful connection and normal operation.

7. Specifications

Feature Specification
Model Number Window Door Sensor
Connectivity ZigBee 2.4GHz Wireless
Smart Home Platform Tuya
Certification CE
Origin Mainland China
Main Unit Dimensions (L x W x H) 82mm x 50mm x 16mm
Magnetic Strip Dimensions (L x W x H) 27mm x 23mm x 13mm
Power Supply USB Powered with Backup Battery
Product Weight 0.082 kg
Package Dimensions (L x W x H) 9cm x 8cm x 5cm

8. User Tips

  • Optimal Placement: For best performance, ensure the sensor's main unit and magnetic strip are mounted on a flat, stable surface and are as close as possible when the door/window is closed, ideally within 10mm.
  • Gateway Proximity: Place your ZigBee gateway centrally within your home to ensure good signal strength to all connected devices, including this sensor.
  • Automation: Explore the automation features within the Tuya Smart APP. You can link the door/window sensor to other smart devices, such as smart lights or sirens, to create custom security or convenience routines.
  • Regular Checks: Periodically check the sensor's status in the Tuya Smart APP to ensure it's online and functioning correctly.

9. Warranty and Support

For detailed information regarding the product, including additional instructions and specifications, please refer to the official user manual PDF:

View User Manual (PDF)

Manufacturer Information:

Guangzhou Aicai Technology Co., Ltd.
Address: Room 709, No. 68, Gangwan Road, Huangpu District, Guangzhou

EU Representative (EC REP):

VALHALLA TAXE
RUE GENERAL DE REFFYE EGD, 88000 EPINAL
TEL: +33-0629986194
Email: valhallatax@outlook.com

This product is Made In China.

© 2024 Tuya. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.