1. Product Overview
The D2 Car Wire Connectors are designed for quick, tool-free electrical wire connections. These double-wire plug-in crimp terminals eliminate the need for stripping wire insulation, soldering, or electrical tape, making wiring tasks simpler and faster. They provide a secure and reusable connection for various electrical applications, particularly suitable for automotive and DIY projects.
Made from flame-retardant polycarbonate and brass, these connectors ensure durability and safety. They feature test holes for easy electrical testing without disassembling the connection.

Box containing 200 D2 quick splice wire connectors.
2. Safety Instructions
- Electrical Hazard: Always ensure power is disconnected before working with electrical wires and connectors to prevent electric shock.
- Wire Compatibility: Use these connectors only with wires within the specified AWG range (18-22AWG) and rated voltage/current (<300V, <10A). Using incompatible wires may lead to poor connections, overheating, or electrical failure.
- Secure Connection: Ensure the wires are fully inserted and the connector is firmly clamped to achieve a stable and safe connection. A loose connection can cause resistance, heat buildup, and potential fire hazards.
- Environmental Conditions: Avoid using connectors in environments exceeding the normal working temperature range (-20 to +80 ℃) or in excessively wet conditions unless additional waterproofing measures are taken.
- Professional Installation: If you are unsure about any electrical work, consult a qualified electrician.
3. Specifications
| Feature | Detail |
|---|---|
| Material | ABS (Flame Retardant Polycarbonate) and Brass |
| Dimensions (Approx.) | 22.1mm (0.87in) Length x 9.7mm (0.38in) Width x 6mm (0.24in) Height |
| Color | Black with clear cover |
| Rated Voltage | <300V |
| Rated Current | <10A |
| Suitable Wire AWG | 18-22AWG |
| Cross-sectional Area | 0.35mm² - 0.75mm² |
| Outer Diameter of Wire | <Φ2.1mm |
| Working Temperature | -20°C to +80°C |

Dimensions of the D2 quick splice wire connector.
4. Installation Guide (Setup)
These quick splice connectors are designed for easy, tool-free installation without the need for stripping wire insulation.
Step-by-Step Instructions:
- Align the Wires: Ensure the positive and negative poles of the wires are correctly aligned with the corresponding channels in the connector.
- Insert the Wire: Insert the unstripped wire into the connector. No need to peel the insulation.
- Press and Clamp: Close the transparent cover firmly until it clicks into place, clamping the wire and making the electrical connection.
- Butt the Other End: Connect the other end of the circuit or another wire to the second terminal of the connector.

Visual guide for D2 quick splice wire connector installation.
Video demonstration of quick wire connector installation and removal.
5. Operating Instructions
Once installed, the D2 quick splice connectors provide a secure and stable electrical connection. They are designed for both permanent and temporary connections, allowing for easy disconnection and reconnection if needed. The transparent cover allows for visual inspection of the wire connection.
Test holes are integrated into the design, enabling electrical testing with a multimeter without needing to remove the connector or strip additional insulation. Simply insert the multimeter probes into the designated test holes.

Connector with test holes for easy electrical testing.
6. Maintenance
- Regular Inspection: Periodically check connections for any signs of loosening, corrosion, or damage. Ensure the transparent cover remains securely closed.
- Cleaning: If necessary, gently wipe the exterior of the connectors with a dry, lint-free cloth to remove dust or debris. Avoid using harsh chemicals or abrasive materials.
- Reusability: These connectors are reusable. When disconnecting, gently pull the wires out. Inspect the internal contacts for any deformation before reusing.
7. Troubleshooting
- No Electrical Connection:
- Ensure wires are fully inserted into the connector and the cover is firmly clamped.
- Verify that the wire gauge (AWG) is within the specified range (18-22AWG). Wires that are too thin may not make proper contact, and wires that are too thick may not fit or damage the connector.
- Check for any breaks or damage in the wire itself.
- Loose Connection:
- Re-open and re-clamp the connector, ensuring a firm click.
- Confirm the wire gauge is appropriate.
- Connector Damage:
- If the connector housing is cracked or the internal brass contacts are bent, replace the connector. Do not use damaged connectors.
8. User Tips
- These connectors are highly effective for quick repairs and installations, especially in situations where traditional stripping and soldering are inconvenient.
- Always double-check the quantity received against your order, as some users have reported discrepancies.
- While versatile, these connectors are best suited for thin wires within the 18-22 AWG range.
- The compact size makes them ideal for tight spaces, such as car wiring.
9. Disposal Instructions
In compliance with the EU WEEE Directive (2012/19/EU), do not dispose of these connectors with household waste. When the product reaches the end of its lifespan, return the ABS and brass components to an authorized plastic and metal recycling collection point to minimize environmental impact. Proper disposal helps conserve natural resources and prevents potential harm to the environment and human health.
10. Warranty and Support
This product meets all essential health, safety, and environmental requirements of EU legislation for decorative materials.
We offer a 12-month warranty against manufacturing defects (e.g., faulty contacts, defective housing). For support or warranty claims, please contact our customer service team with your purchase details. Please refer to the original seller's contact information for direct support.