1. Introduction
The PLAYAIBOX P19T is a versatile 4-in-1 wireless adapter designed to enhance your in-car connectivity. It seamlessly converts your vehicle's wired CarPlay or Android Auto system into a wireless one, and also supports Airplay and Miracast for screen mirroring. Enjoy intelligent voice assistance, music streaming, navigation, and more, all wirelessly.
Product overview showing the adapter and its 4-in-1 capabilities.
2. Safety Information
CAUTION:
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
DANGER:
- To avoid danger of suffocation, keep this bag away from babies and children. Do not use this bag in cribs, beds, carriages, or playpens. This bag is not a toy.
3. Compatibility
This adapter is designed to work with vehicles that have a factory-installed wired CarPlay or Android Auto system.
3.1 Mobile Phone Requirements:
- Wireless CarPlay: Supports iPhone 6 and above, with iOS 10 or above.
- Wireless Android Auto: Supports Android 11 and above mobile phone models. Android phones must natively support wireless Android Auto.
3.2 Vehicle Compatibility:
Compatible with over 98% of vehicle models equipped with factory-installed wired CarPlay/Android Auto systems. Examples of supported car brands include:
- Audi, Benz, Volvo, VW, Toyota, Skoda, Seat, Nissan, Mazda, Lexus, Kia, Jeep, Jaguar, Hyundai, Honda, Haval, GMC, Ford, Chevrolet, Citroen, Buick, Cadillac, Chery, MG.
Visual representation of wide compatibility with car brands and phone OS versions.
4. Setup and Connection
The PLAYAIBOX P19T adapter is designed for plug-and-play operation. Ensure your vehicle's engine is off before connecting the device.
The adapter connected to a car's USB port.
4.1 Wireless CarPlay / Android Auto Connection:
- Connect the PLAYAIBOX adapter to your car's USB port (usually the one used for wired CarPlay/Android Auto).
- On your car's infotainment screen, click on the CarPlay or Android Auto icon. The adapter's Bluetooth name (e.g., "SmartBox-XXXX") should appear.
- On your mobile phone, ensure both Bluetooth and Wi-Fi are turned on.
- Search for the adapter's Bluetooth name (e.g., "SmartBox-XXXX") in your phone's Bluetooth settings and initiate pairing.
- After successful Bluetooth connection, the adapter will automatically recognize and connect to Wireless CarPlay or Android Auto.
Diagram illustrating the conversion from wired to wireless CarPlay/Android Auto.
4.2 Airplay / Miracast (Screen Mirroring) Connection:
- Ensure Wi-Fi is turned on on your mobile phone.
- On your car's infotainment screen, select the Airplay or Miracast icon.
- On your phone, find the wireless screen projection entrance. This is usually available in the quick settings/drop-down menu or can be searched for in your phone's settings (e.g., "Screen Mirroring", "Smart View", "Cast").
- In the wireless screen casting list on your phone, find the device name of the adapter (e.g., "SmartBox-XXXX").
- Click on the device name to connect and cast your phone's screen to the car's display.
Watch the official video for a visual guide on connecting and using the adapter:
Demonstration of product connection and functionality for CarPlay, AirPlay, and Miracast.
5. Operating Instructions
Once connected, the adapter allows you to use various features on your car's infotainment screen:
- Wireless CarPlay: Access navigation, make calls, send/receive messages, and listen to music using Siri voice control.
- Wireless Android Auto: Use Google Maps, play music, and interact with your phone's assistant via voice commands.
- Airplay: Mirror your iPhone's screen to the car display for apps, videos, and more.
- Miracast: Mirror your Android phone's screen to the car display for various content.
- Intelligent Voice Assistant: Utilize your phone's voice assistant (Siri, Google Assistant) for hands-free control, enhancing driving safety.
Intelligent voice assistant frees your hands for safe driving.
5.1 OTA Updates:
The device supports Over-The-Air (OTA) updates to ensure optimal performance and access to the latest features. Check for updates periodically through the device's settings on your car's screen or via a dedicated app if provided.
Key features like Bluetooth 5.0, OTA updates, and 5G WiFi signal transmission.
6. Maintenance
- Keep the device clean by wiping it with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures, direct sunlight, or excessive moisture.
- Do not attempt to disassemble or repair the device yourself, as this will void the warranty.
- Ensure proper ventilation around the device, especially during extended use, to prevent overheating.
7. Troubleshooting
- Device Disconnects Frequently / Stops Working:
- Ensure the adapter is securely plugged into the car's USB port.
- Check if the car's USB port provides stable power. Try a different USB port if available.
- Ensure your phone's Wi-Fi and Bluetooth connections are stable and not interfering with other devices.
- The device may overheat during prolonged use. Ensure it has adequate ventilation and is not exposed to direct sunlight. Unplugging it for a short period may resolve the issue.
- Check for and install any available OTA updates for the adapter.
- Poor Screen Display / Pixelation:
- Ensure your phone's display settings are optimized for mirroring.
- Check the quality of the Wi-Fi connection between your phone and the adapter.
- Bluetooth Connection Issues (e.g., hands-free function not working):
- Ensure your phone's Bluetooth is enabled and paired correctly with the adapter.
- Forget the device in your phone's Bluetooth settings and re-pair.
- Some car systems or phone models may have specific Bluetooth limitations. Consult your car's manual or phone manufacturer's support.
- Adapter Not Recognized by Car:
- Verify that your car has a factory-installed wired CarPlay/Android Auto system. This adapter is not compatible with cars that do not have this feature.
- Try restarting your car's infotainment system.
- Ensure the USB cable (if any) connecting the adapter to the car is functional.
- Android Auto shows CarPlay / Signal Drops:
- This might indicate a conflict or an unstable connection. Re-pair your phone and ensure the correct mode (Android Auto) is selected on the car's screen.
- Check for any firmware updates for your car's infotainment system.
8. Specifications
| Feature | Specification |
|---|---|
| Product Name | Wireless CarPlay Adapter |
| Model | P19T |
| Rated Voltage | 1A |
| Bluetooth Version | 5.0 |
| WiFi Frequency | 2.4G + 5G |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 19 cm x 17 cm x 3 cm |
| Package Weight | 0.055 kg |
9. User Tips
- Check Compatibility: Always ensure your car has a factory-wired CarPlay/Android Auto system and your phone meets the minimum OS requirements before purchase.
- Stable Connection: For optimal performance, ensure a strong and stable Wi-Fi and Bluetooth connection between your phone and the adapter.
- Ventilation: If the device feels warm during use, ensure it's in a well-ventilated area to prevent overheating, which can lead to disconnections.
- Troubleshooting Disconnects: If you experience frequent disconnections, try unplugging the adapter for a few minutes and then reconnecting it. Also, check for any available firmware updates.
- Easy Setup: Many users find the setup process straightforward; simply plug it in, pair via Bluetooth, and it should connect automatically.
10. Warranty and Support
For product support, technical assistance, or warranty inquiries, please contact the manufacturer:
- Manufacturer: Huizhou Cora Technology Co.,Ltd.
- Manufacturer E-mail: 746491952@qq.com
- Batch Number: 2026228
A detailed user manual in PDF format is also available for download: View User Manual (PDF)