1. Introduction
This product is primarily designed for PC gaming and supports Nintendo Switch (NS) mode, Bluetooth (BT) connectivity, and 2.4G dongle for wireless PC gaming. It offers versatile compatibility with various platforms including Nintendo Switch, Android, iOS devices, laptops, and desktop PCs. The controller supports PC modes such as X_INPUT, D_INPUT, and NS mode.
Figure 1: AJAZZ GP100 Gamepad - The all-rounder gamepad with Hall linear joystick and six-axis somatosensory.
2. Product Features
- PC Functions: Includes rapid fire, motor vibration adjustment, M1/M2 mapping, and macro functionality.
- LED Indicators: Four LED status indicators (Red/White/Green/Blue) for various states.
- Buttons & Modes: 18 functional buttons with a three-mode switch (NS/BT/Dongle) for easy pairing.
- Advanced Joysticks: Built-in dual motors and high-precision Hall 3D joysticks with switchable analog/digital output.
- Customizable Buttons: Two customizable M1/M2 buttons on the back for mapping and macro functions.
- Mode Switching: Hold '+' or '-' button for 3 seconds to switch between X_input/D_input/NS mode.
- Motion Sensing: Integrated 6-axis gyro for fast and accurate target locking.
- Wired Connectivity: Supports wired connection to PC for software upgrades and X/D-INPUT/NS mode.
- RGB Lighting: Features RGB lighting effects on both sides, each with four 1615 RGB lights.
- Activation: Activated only through charging.
- Sleep Mode: Automatically enters sleep mode after 5 minutes of inactivity when paired.
- Charging: Can be charged via Type-C port or dedicated charging dock.
- Polling Rate: Supports 1000 Hz polling rate via cable or wireless dongle.
- App Compatibility: Features app compatibility for enhanced control.
3. Components Overview
3.1 Front View
Figure 2: Front view of the GP100 Gamepad.
- HOME Button: Powers on/off, enters sleep mode.
- View Button ("-"): Functions as '-' in NS mode, View in PC/Android/iOS.
- Menu Button ("+"): Functions as '+' in NS mode, Menu in PC/Android/iOS.
- Action Buttons (X, Y, A, B): Standard action buttons.
- Left Joystick/L3: Left analog stick, L3 button when pressed.
- Right Joystick/R3: Right analog stick, R3 button when pressed.
- D-Pad: Directional pad.
- Motor Setting Button ("M"): Rapid fire, motor vibration adjustment, screenshot in NS mode.
- RGB Lighting: Four RGBs on each side (left and right).
- LED Status Indicators: White LED (top left), Blue LED (top right), Green LED (bottom left), Red LED (bottom right) for low voltage, charging, and pairing status.
3.2 Top and Back View
Figure 3: Top and back view of the GP100 Gamepad.
- ZR, R, L, ZL: Shoulder and trigger buttons.
- Type-C Port: For charging and wired connection.
- Right Board Long/Short Switch: Adjusts trigger stroke for the right trigger.
- Left Board Long/Short Switch: Adjusts trigger stroke for the left trigger.
- M1, M2: Customizable back buttons.
- Mode Switch (NS/BT/Receiver): Selects connection mode.
3.3 Charging Port and Lighting Effects
Figure 4: Charging dock light effects and gamepad lighting.
The charging port is located at the top of the controller. During charging, both the controller and the dock will display breathing and flashing RGB lighting. Once fully charged, the RGB lighting effects on both the dock and the controller will turn off.
4. Setup and Connection
4.1 NS Mode Connection (Nintendo Switch)
4.1.1 Wireless BT Pairing
- Set the mode switch on the controller to NS mode.
- Press and hold the HOME button for 3 seconds until the white LED indicator flashes rapidly.
- On your Nintendo Switch console, open the pairing menu to perform BT pairing.
- Once successfully paired, all controller functions will work, and the console-assigned channel light will remain steady.
- If pairing fails, the controller will enter sleep mode after approximately 60 seconds. If paired but idle, it will sleep after 5 minutes.
4.1.2 Wired Guidance for BT Pairing
- Connect the controller to the Nintendo Switch console via a USB data cable.
- Press any button on the controller to wake it up.
- Once the data cable is disconnected, the controller will automatically connect to the Nintendo Switch console via BT.
- Up to four controllers can connect simultaneously, with Red/White/Green/Blue LEDs indicating assigned channels.
4.2 BT Mode Connection (Android/iOS/Laptops)
4.2.1 Android Devices
- Ensure the controller is in sleep mode.
- Turn on Bluetooth settings on your Android device (phone, TV).
- Switch the controller mode to "BT" mode.
- Press and hold the HOME button for 3 seconds until the status indicator LED flashes blue rapidly.
- Search for "Xbox Wireless Controller" on your device and click to pair.
- Once paired, the Red LED will stay lit.
4.2.2 iOS Devices
- Ensure the controller is in sleep mode and the mode switch is in "BT" position.
- Press and hold the HOME button for 3 seconds until the blue LED flashes rapidly.
- Search for "Xbox Wireless Controller" on your iOS device and click to pair.
- Once paired, the red LED will stay lit.
- The controller will automatically reconnect to the last paired Android or iOS device when woken up (if mode switch is in "BT" position).
- If pairing fails, the controller will enter sleep mode after 60 seconds. If idle after successful pairing, it will sleep after 5 minutes.
4.2.3 Laptops
- Ensure the controller is in sleep mode and the mode switch is in "BT" position.
- Press and hold the HOME button for 3 seconds until the blue LED flashes rapidly.
- Search for "XBOX Wireless Controller" on your laptop and click to pair.
- Once paired, the blue LED will stay lit.
4.3 Dongle Mode Connection
4.3.1 Direct Dongle Connection
- Set the controller mode switch to the dongle position.
- While the controller is in sleep mode, press and hold the HOME button for 3 seconds until the red LED flashes rapidly.
- Plug the dongle into the PC's USB port.
- Press the "Pairing" button on the dongle for 3 seconds until the green LED on the dongle flashes rapidly.
- The dongle and controller will pair. Once connected, the green LED on the dongle and the red LED on the controller will stay lit.
- If pairing fails, the controller will enter sleep mode after 60 seconds. If idle after successful pairing, it will sleep after 5 minutes.
4.3.2 Dongle Connection via Charging Dock
- Connect the charging dock to the PC via the Type-C port.
- Plug the dongle into the USB port on the charging dock.
- Switch the controller mode to the dongle position.
- When the controller is placed on the charging dock, a charging indicator will be displayed. When picked up, it will automatically reconnect to the dongle.
- For first-time pairing: While the controller is in sleep mode, press and hold the HOME button for 3 seconds until the red indicator flashes rapidly. Simultaneously, press and hold the dongle's "pairing button" for 3 seconds until its green LED flashes rapidly.
- Once paired, the dongle can connect to the PC through the charging dock.
- The dongle operates in X-INPUT mode by default. Press and hold the +/- buttons for 3 seconds to switch to D-INPUT mode or NS mode.
4.3.3 Bluetooth Receiver Connection (PC)
- After connecting to the Bluetooth receiver, the controller supports X-INPUT functionality by default. The system assigns a solid red indicator LED, and the device name appears as "GP100" (requires Xbox 360 drivers on PC).
- Press and hold the +/- buttons for 3 seconds to switch to NS mode. The system assigns a solid blue indicator LED, and the device name will be displayed as "GP100".
- To switch to D-INPUT mode, press and hold the +/- buttons for 3 seconds. The device will be displayed as "GP100," and the controller's indicator light will stay lit with both red and blue lights.
5. Operating Instructions
5.1 "HOME" Button Operation
To put the controller into sleep mode, press and hold the HOME button for 5 seconds when the controller is powered on.
5.2 Controller Wake-up and Reconnection
The controller supports wake-up using any key (excluding L3, R3, M1, M2, and the trigger mode switch). After waking up, the controller enters the reconnection state, indicated by white and green lights flashing in a flowing pattern. If the controller was previously paired and the pairing has not been cleared, or if it was paired in another mode, the mode switch will automatically enable the reconnection function.
5.3 Vibration Function
- Nintendo Switch: Manually turn motor vibration on/off in the "Settings" menu.
- PC: Hold down the "M" button and move the left 3D joystick up/down to adjust vibration intensity. Four levels are available: 100%, 60%, 30%, 0%. Settings are saved after powering off. Factory reset defaults to 60%.
Figure 5: Double centrifugal vibration for immersive gaming.
5.4 Customizable Back Buttons (M1, M2)
The M1 and M2 back buttons can be customized. Mappable functions include UP, DOWN, LEFT, RIGHT, A, B, X, Y, L1, R1, ZL, ZR, "-", "+", and any direction of the left and right 3D joysticks.
5.4.1 Mapping Process
- After connecting to NS/BT/Receiver, hold M + M1. The left RGB light will slowly flash white, indicating entry into mapping mode.
- In M1 customization mode, press a button (e.g., "A"). Then press M1 again; the RGB light will flash once, confirming "A" is mapped to M1.
- Follow the same steps for M2.
- You can assign multiple function keys to M1 (M2) by holding M + M1 and inputting keys sequentially. Each M1/M2 macro can store up to 16 key inputs.
5.4.2 Clearing M1 & M2 Customization
While connected to a Nintendo Switch console or PC, repeat the mapping steps to clear the customized feature of M1 (and M2). After clearing, the button will have no assigned function. Custom settings are saved after shutdown; however, a factory reset will remove all custom functions.
Figure 6: M1 and M2 back buttons for macro programming.
5.5 Turbo (Rapid-Fire) Function
5.5.1 Enabling Turbo
Hold down the "M" button and press one of the function buttons (A/B/X/Y, L1/R1, ZL/ZR) to enable the rapid-fire function. The TURBO button functionality applies to these eight keys. After setting, you can switch between manual rapid-fire, automatic rapid-fire, or single shot.
5.5.2 Cancelling Turbo
To cancel the rapid-fire function for a specific key, repeat the enabling steps or hold down the "M" button for 5 seconds.
5.5.3 Adjustable Turbo Speed
Hold the "M" button + move the right joystick up/down to adjust the turbo speed between three levels: Fast, Medium, and Slow. Settings are saved after shutdown. Factory reset restores default medium speed and single-shot mode.
5.6 Trigger Short and Long Stroke Operation
- Long Travel Mode: Pressing the left or right trigger provides an analog function (range 1-255) with vibration feedback.
- Short Travel Mode: Pressing the left or right trigger immediately reaches 255 with vibration feedback.
Figure 7: Hall double-cut trigger for linear and micro-motion switching.
5.7 RGB Lighting Effect Settings
Note: RGB lighting effects can only be adjusted when the controller is connected to the NS console or PC via wired/wireless connection. RGB effects cannot be adjusted while the controller is charging on the dock.
5.7.1 Lighting Modes
- Mode 1: Rainbow mode (default).
- Mode 2: Lightning mode. Simultaneously press the left and right 3D buttons once (pause for 100 microseconds) to switch the light color combination. The color changes once with the key combination (L3, R3).
- Mode 3: Multi-color cycling breathing mode.
- Mode 4: In this mode, simultaneously press the left and right 3D buttons once (pause for 100 microseconds) to switch the light color combination. The color changes once with the key combination (L3, R3).
5.7.2 Adjusting Brightness
Four brightness levels are available: 25%, 50%, 75%, and 100%.
- Decrease Brightness: M + left joystick right direction.
- Increase Brightness: M + left joystick left direction.
5.7.3 Turning RGB On/Off
Press and hold M + "R3" for 5 seconds to turn off the RGB lighting. Press and hold M + "R3" for 5 seconds again to turn it back on. The current state is saved after powering off. Restoring factory settings will clear the lighting settings, with the default set to Rainbow mode.
5.8 Menu and M Button Functions
- PC or Android/iOS: The View button, Menu button, and "M" button serve as the View and Menu functions. The "M" button also has rapid-fire and motor vibration adjustment functions.
- Nintendo Switch: The View button functions as the "-" button, the Menu button as the "+" button, and the "M" button serves as the screenshot function. To activate the screenshot function, the "M" button must be pressed twice.
6. Charging and Battery
6.1 Charging the Controller
- Using the Charging Dock: Place the controller into the included charging dock. The four charging contacts at the bottom of the controller will enable charging.
- Via Adapter: Plug the controller into the Type-C port. The channel light will glow a constant red LED and switch off when charging is complete.
- Via Power Source: Directly connect the controller's Type-C port to a power source. The channel light will glow a constant red LED and turn off when fully charged.
- While Connected to a Device: If charging while connected to a device, the channel light will display a slowly flashing red LED and turn off when fully charged.
6.2 Charging Dock Instructions
- The dock is exclusively for charging GP100 grips.
- It can be powered by an external adapter or power supply.
- Input voltage/current: 5V/1A, providing 800mAh charging.
- The Type-C port has over-voltage protection: if input voltage exceeds 6V+0.2V, the charger will not output voltage, and the RGB indicator light will be off.
- When charging the handle, the RGB indicator light is on and off when fully charged.
- The charging light effect (breathing and flashing) can be changed by pressing the handle's M key + R3 key.
6.3 Low Battery Alert
When the controller's battery voltage drops below 3.5V, the channel's red LED will flash rapidly, indicating that the controller needs to be charged.
7. Maintenance and Calibration
7.1 3D Joystick/Gyroscope Factory Calibration
- While the controller is in sleep mode, press L3 + R1 simultaneously to enter joystick and trigger calibration. The red and green lights will flash alternately.
- Rotate the joystick forcefully for 2 full circles.
- Press the trigger all the way down 2 times.
- Place the controller on a flat surface.
- Press the A button again to complete the calibration. The controller will automatically proceed to motion calibration (flashing blue light) and then return to sleep mode.
7.2 Calibrating the Controller's Gyroscope Sensor on Nintendo Switch
- After connecting to the Nintendo Switch, return to the main menu and go to "Settings" > "Controllers and Sensors".
- Scroll up the menu on the right side and select "Calibrate Motion Controls".
- In the pop-up menu, click "Calibrate Controller".
- Place the controller on a flat surface and follow the on-screen instructions.
- Press and hold the "-" or "+" button on the controller to complete the gyroscope calibration.
Figure 8: Nintendo Switch gyroscope calibration interface.
7.3 Calibrating the 3D Joystick with the Nintendo Switch Console
- After connecting to the Nintendo Switch, return to the main menu and go to "Settings" > "Controllers and Sensors".
- Scroll up the menu on the right side and select "Calibrate Control Sticks".
- Follow the on-screen instructions and press the joystick you want to calibrate.
- Press the "X" button on the controller to display the prompt menu, then press the "A" button to confirm the calibration.
- Once in the "Calibrate Control Stick" interface, perform the calibration actions: move the joystick up, down, left, right, and draw circles.
8. Troubleshooting
8.1 Reset Function
If the controller malfunctions, you can reset it by pressing the reset button through the reset hole (located on the back of the controller, near the mode switch).
8.2 Controller Factory Lock Mode
8.2.1 Entering Factory Lock Mode
In sleep mode, simultaneously press and hold the left 3D joystick (L3), the right 3D joystick (R3), and the "M" button for 3 seconds. The indicator lights will illuminate briefly and then turn off, indicating factory lock mode. This mode disables wake-up from any button to prevent accidental connections. (Defaults to X_input mode after setting.)
8.2.2 Exiting Factory Lock Mode
When in factory lock mode, all buttons are disabled for wake-up. To exit, you must charge the controller using a USB data cable at least once. Once charged, the controller's functionality will be restored.
8.3 GameMacro APP Connection Issues
If the connection fails for any reason within the GameMacro APP, a troubleshooting page will pop up. You can also click the upper right corner within the app to view solutions to frequently asked questions (FAQs).
9. Specifications
9.1 Controller Electrical Specifications
- Power Supply: Built-in polymer battery
- Battery Capacity: 800mAh
- Usage Time: Approximately 6 to 8 hours of continuous use
- Charging Time: Approximately 3 hours
- Charging Voltage: DC5V
- Charging Current: 390mA
- Operating Current: 290mA (Maximum current when motor vibration and RGB are set to maximum)
- Sleep Mode Current: Less than 20µA
- Pairing Current: Less than 45mA
- Wireless Wake-up Function: Supported
9.2 Physical Dimensions and Weight
Figure 9: Product dimensions.
| Attribute | Value |
|---|---|
| Product Branding | AJAZZ |
| Product Model | GP100 |
| Connection | BT 5.3, Wire, 2.4G |
| Applicable Platforms | PC, Switch, Android, iOS |
| Trigger Type | Two-stage Hall linear trigger with trigger lock to switch between long and short strokes. |
| Joystick Type | Custom Hall Joystick (500W life) |
| Stick Polling Rate | Wired with 2.4G receiver 1000Hz |
| Vibration Motor | Rotor motors of the same type for Xbox |
| ABXY Key | 200W sub-life silent adhesive conduction button |
| Shoulder Button Type | Silent conductive silicone keys |
| D-pad Type | Silent conductive silicone keys |
| Button Layout | The keys are detachable, and the Xbox and S layouts are interchangeable. |
| Combo Function | Yes |
| Battery Capacity | 800mAh |
| AB/XY Key-Value Swapping | Yes |
| Product Dimensions | 156*106*59mm |
| Product Weight | 256g |
| Package Length | 20 cm |
| Package Width | 16 cm |
| Package Height | 10 cm |
| Package Weight | 0.55 kg |
10. Firmware Upgrade
If controller functions become unavailable due to a console system upgrade or if a functional update is required, the controller firmware can be upgraded via a PC.
- Double-click to open the software: "GDF-G560637_74A7_V1.0_250110.exe".
- When the controller is in sleep mode or powered on, connect it to the PC using a USB cable.
- Simultaneously press and hold HOME + X + Y for 3 seconds to enter upgrade mode (the "Online" indicator will turn green).
- The "Update Firmware" button will change from gray to black. Click "Update Firmware" to proceed with the upgrade. This indicates a successful connection.
- During the upgrade process, ensure the data cable remains stably connected.
11. GameMacro APP
11.1 Installation
To install the GameMacro APP, open your mobile phone or tablet, use WeChat to scan the QR code below, and download the "GameMacro APP".
Figure 10: QR code for GameMacro APP.
11.2 Connection
- Find the Bluetooth name related to GameMacro in your phone's Bluetooth list and connect to pair.
- After entering the app, tap the "+" icon in the top left corner, select the controller that was just connected via system Bluetooth, and complete the connection.
11.3 Reconnection
For reconnection, ensure that your phone's system Bluetooth and the controller are already paired. You can select the previously connected device from the history list to reconnect.
11.4 Controller Details and Calibration within App
The controller details section within the app allows for physical button testing. Pressing controller buttons will show if they are functioning correctly. The app also provides calibration procedures for gyroscope, joystick, and trigger. Complete each calibration within 60 seconds as per the instructions.
11.5 Firmware Version Management
After downloading a new firmware version, you can also revert to the old version without affecting the use of the app.
11.6 Macro Mode and Contact Mode
Mode switching can be done not only through the controller's combination keys (as described in this manual) but also through the GameMacro app. Different modes offer different pages and usage scenarios.
12. User Tips
- Accidental Power-On: Be aware that the controller may power on with the slightest touch. Ensure it is stored securely to prevent unintended activation.
13. Warranty and Support
For any issues, technical support, or warranty claims, please contact the manufacturer or your point of purchase. Keep your proof of purchase for warranty services.
14. Product Overview Video
This video showcases the AJAZZ GP100 gamepad's features including Hall Effect joysticks, Xbox layout, RGB LED, 3 connection types (wired, Bluetooth, dongle), compatibility with iOS, Android, PC, Laptop, textured grip, rounded D-Pad, mechanical buttons, 1000Hz polling rate, GYRO motion sensor, low circularity error, macro buttons, trigger lock, and ergonomic bumpers & triggers. It also highlights the black and white color options.