BOVBOX WL009

Contents

Bovbox WL009 200m HDMI Wireless Extender User Manual

Model: WL009 | Brand: Bovbox

1. Introduction

The Bovbox WL009 HDMI Wireless Extender is designed to transmit HD audio and video signals wirelessly via Wi-Fi. It also supports infrared remote control for convenient operation. This device offers excellent image processing and transmission capabilities, ensuring smooth and stable signal delivery. It is a cost-effective solution for HDMI signal extension.

Product Overview

Video: Demonstration of the Bovbox WL009 HDMI Wireless Extender in various setup configurations.

2. Safety & Warnings

Read all instructions before use to ensure safety and prevent damage.

  • Warning: Keep ventilation openings clear. Do not place on hot surfaces.
  • Warning: Use the original power adapter and power supply cables.
  • Warning: Do not disassemble the casing to avoid damaging the product.
  • Warning: Don't put anything in the device.
  • Warning: Do not expose equipment to rain, moisture, and liquids.
  • Warning: Only DC5V 2A is used.

3. Package Contents

The standard package for the "1 TX and 1 RX" configuration includes:

  • 200m Wireless Transmitter (TX) x 1
  • 200m Wireless Receiver (RX) x 1
  • 5V 2A Power Adapter x 2
  • USB Power Cable x 2
  • IR Cable x 2
  • User Manual x 1

Note: If you selected a different configuration (e.g., 1 TX to 2 RXs, 1 TX to 3 RXs, or 1 TX to 4 RXs), the number of receivers and associated accessories will vary accordingly. All items come without a retail box unless specified.

Bovbox WL009 1 TX + 1 RX unit
Image: A single Transmitter (TX) and a single Receiver (RX) unit, labeled '1 TX + 1 RX'.

4. Product Features

  • One-to-Multi Mode: Supports one transmitter working with up to four receivers simultaneously without interference, allowing multiple screens to share content.
  • HDMI Local Output: The transmitter (TX) includes an HDMI output port for local pass-through of the video source. This allows connecting an additional monitor directly to the TX unit.
  • Wireless Transmission (No WiFi Required): Built-in wireless transmission protocol means no home Wi-Fi network is needed. Units are pre-paired for plug-and-play operation.
  • Long Transmission Distance: Up to 200m in a barrier-free open space (1 TX to 1 RX mode). Distance may vary with more receivers or obstacles:
    • 1 TX to 1 RX: 200m
    • 1 TX to 2 RX: 150m
    • 1 TX to 3 RX: 100m
    • 1 TX to 4 RX: 50m
  • IR Remote Control Function: Allows remote control of the video source or display monitor (works only in 1 TX to 1 RX mode).
  • Plug and Play: Units are pre-paired for immediate use. Re-pairing is simple if needed.
  • Highly Compatible: Fully compatible with 1080p HDMI devices such as game consoles (PS3/4/5, Xbox), DVD players, set-top boxes, computers, HD cameras, and HDMI-compatible display monitors/projectors.
  • 5.8G Dual-Band Transmission: Dual antennas enhance signal transmission stability and smoothness, preventing lagging.
  • Built-in ESD Protection: Electrostatic discharge protection circuit ensures all-round system security.
Wireless Photography HD setup with camera and monitor
Image: Wireless Photography HD setup showing a camera connected to a TX unit and a monitor connected to an RX unit, with a 200m range and low latency.
TX and RX Wireless Connection for audio and video sync transmission
Image: Diagram illustrating TX and RX wireless connection for audio and video synchronization, showing a laptop (TX) connected to a TV (RX).
1 to 4 Mode explanation with transmission distances
Image: Explanation of '1 to 4 Mode' showing a single TX unit transmitting to four RX units, with corresponding transmission distances for different numbers of receivers.
IR Remote support diagram
Image: Diagram showing IR remote control support, allowing control of a set-top box/DVD from a living room via the RX terminal.
Audio Input and Output connections
Image: Diagram detailing audio input on the Transmitter (TX) for external microphones and audio output on the Receiver (RX) for live sound via the AMS interface.
Full HD 1080P Display with Audio Video Sync Transmission
Image: A TV displaying Full HD 1080P content with audio and video synchronized, indicating the device's capability.
HDMI Extender designed for cameras with screw holes
Image: Close-up views of the HDMI Extender showing camera-specific screw holes, highlighting its design for camera integration.
5.8G dual-band transmission illustration
Image: Visual representation of 5.8G dual-band transmission, emphasizing stable signal without lagging.
Big screen learning/entertainment setup
Image: A laptop connected to a TX unit, wirelessly displaying content on a large TV screen, promoting big screen learning and entertainment.
TX Support local bypass connection
Image: Diagram showing the TX unit supporting local bypass, allowing a direct HDMI connection from the source to a local monitor while also transmitting wirelessly.
200m Long Range Wireless Transmission in a conference room
Image: Illustration of 200m (656FT) long-range wireless transmission in a large conference room, suitable for most indoor meeting rooms/lecture halls.
1 to 2 Mode, Dual Display setup
Image: A laptop (TX) connected to two RX units, displaying content on two separate screens (RX 1 and RX 2), demonstrating '1 to 2 Mode' for dual display.

5. Setup & Connection

5.1. Wireless One-to-One Connection

This mode involves one Transmitter (TX) and one Receiver (RX) for a single display setup.

  1. Connect your HDMI source device (e.g., laptop, game console) to the TX unit's HDMI IN port.
  2. Connect the TX unit's HDMI Loopout port to a local HDMI monitor (optional).
  3. Connect the RX unit's HDMI OUT port to your remote HDMI monitor.
  4. Ensure both TX and RX units are powered using the provided 5V 2A power adapters.
One-to-One Wireless HDMI Connection Diagram
Image: Diagram showing a laptop (HDMI source) connected to a TX unit, wirelessly transmitting to an RX unit connected to an HDMI monitor. This illustrates a point-to-point precise transmission for efficient meetings.

5.2. Wireless One-to-Many Connection (Up to 4 RXs)

This mode allows one Transmitter (TX) to broadcast to multiple Receivers (RXs) for multiple displays.

  1. Connect your HDMI source device to the TX unit's HDMI IN port.
  2. Connect each RX unit's HDMI OUT port to its respective remote HDMI monitor.
  3. Ensure all TX and RX units are powered using their dedicated 5V 2A power adapters.
One-to-Many Wireless HDMI Connection Diagram
Image: Diagram showing a single TX unit transmitting wirelessly to four RX units, each connected to a separate monitor. This setup supports up to one send and four receive.

5.3. Pairing New Receivers (RX)

Attention: Each new RX needs to be paired with the TX at the first time.

  1. Power up both the new RX and the TX with their respective 5V 2A power adapters.
  2. Connect the new RX's "HD OUT" port and the TX's "HD IN" port using an HDMI cable.
  3. Wait for approximately 30 seconds. Check the indicator LED on the TX unit. If it changes to a green flashing light, and then remains stable for another 5 seconds, it means the new RX is successfully paired to the TX.
Pairing process for new RX unit
Image: Step-by-step visual guide for pairing a new RX unit with a TX unit using an HDMI cable, showing the LED indicator for successful pairing.

6. Interface Description

Transmitter (TX) Unit

  • 5V2A Power Input: Connect the power adapter here.
  • Monitor: Local HDMI output.
  • HDMI IN: Connect your HDMI source device.
  • IR Input: Connect the IR cable for remote control signal transmission.
  • Reset: Button to reset the device.
  • Power Indicator: LED light indicating power status.

Receiver (RX) Unit

  • 5V2A Power Input: Connect the power adapter here.
  • HDMI OUT: Connect to your display monitor.
  • IR Output: Connect the IR cable for remote control signal reception.
  • Reset: Button to reset the device.
  • Power Indicator: LED light indicating power status.
HDMI Extender designed for cameras with screw holes
Image: Close-up views of the HDMI Extender showing camera-specific screw holes, indicating its design for camera integration and mounting.

7. Operating Instructions

7.1. Basic Operation

  1. After connecting the TX and RX units as per the setup instructions, ensure all devices are powered on.
  2. The system should automatically establish a wireless connection. The display connected to the RX unit will show the content from your HDMI source.

7.2. IR Remote Control Function

The IR remote control function allows you to control your source device (e.g., DVD player, set-top box) from the location of your remote display. This function is only available in 1 TX to 1 RX mode.

  1. Connect the IR transmitter cable to the TX unit's IR Input port and position the IR head near the IR receiver of your source device.
  2. Connect the IR receiver cable to the RX unit's IR Output port and place the IR head in a location where your remote control can easily point to it.
  3. Use your original remote control to operate the source device from the remote display location.

7.3. Audio Input/Output

  • Transmitter (TX): Features an AMS interface for external microphone input, useful for camera live streaming or recording.
  • Receiver (RX): Features an AMS interface to receive live sound, allowing connection to external audio systems or headphones.

8. Troubleshooting (FAQ)

8.1. Receiver Screen shows "searching TX....."

  1. Check if the sender (TX) power supply is properly connected and if its power indicator LED is on.
  2. Verify that the transmission distance does not exceed the device's limitations and that there are no excessive obstacles (e.g., thick walls). Try repositioning the units to reduce obstructions.
  3. Check the signal strength indication on the receiver. If the signal is weak, adjust the installation and placement of wireless devices to ensure better signal reception.

8.2. IR Remote Control has no response?

  1. Ensure the IR infrared head is inserted correctly and not oppositely.
  2. Make sure the IR sender head on the TX unit is facing and close to the IR receiver of the signal source device.
  3. Confirm that the infrared frequency of your remote control is within the controllable range of 20KHz~60KHz.

9. Specifications

Parameter NameDetailed Description
Supporting AgreementHDMI 1.3; HDCP 1.3
Max Resolution Support1920×1080P@60Hz
Infrared Remote Control Frequency Range20~60KHz
Wireless Standard803.11a/n
Max Wireless Transmission Distance200m (no obstacles)
Operation Temperature-5°C - +70°C
Working Humidity5% - 90%
Wireless Transmission Frequency5GHz

10. User Tips

  • For optimal performance, ensure a clear line of sight between the TX and RX units, especially when using multiple receivers, to maximize transmission distance.
  • When experiencing signal issues, try adjusting the position of the antennas on both the transmitter and receiver units.
  • If you need to extend the range or have many obstacles, consider using a configuration with fewer receivers or ensuring the TX and RX units are as close as possible.
  • Always use the provided power adapters to ensure stable operation and prevent damage.

11. Warranty & Support

For any technical support or warranty inquiries, please contact your retailer or the official brand agent. Refer to the product packaging or purchase documentation for specific contact details.

Official brand agent: YiBao Trading Ltd Store / YiBaohk Trading LTD Store / Qkens Store

Note: This manual is for informational purposes only. Specifications and features may be subject to change without prior notice.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.