JETTING LED Driver Transformer Series

Contents

LED Driver Transformer Instruction Manual

Model Series: LED Driver Transformer Series

1. Introduction

This manual provides essential information for the safe and efficient installation and operation of your JETTING LED Driver Transformer. Please read this manual thoroughly before installation and keep it for future reference.

The LED Driver Transformer is designed to convert AC household current to the appropriate DC voltage and current required by LED lighting fixtures, ensuring stable and efficient illumination.

2. Safety Information and Warnings

  • FRAGILE: Handle with care to avoid damage to electronic components.
  • Professional Installation Recommended: For your safety, consult a qualified electrician for installation, especially if you are unfamiliar with electrical wiring.
  • Keep Dry: Protect the device from water, moisture, and high humidity.
  • Storage: Store in a cool, dry place away from direct sunlight and extreme temperatures.
  • Ventilation: Ensure adequate ventilation around the driver to prevent overheating.
  • Compatibility: Always match the driver's output specifications (voltage and wattage) to the requirements of your LED lights. Overloading or underloading can damage the driver or LEDs.

3. Setup and Installation

Follow these steps for proper installation:

  1. Power Off: Before starting any wiring, ensure the main power supply to the circuit is turned off at the breaker.
  2. Connect Input: Connect the AC input wires of the LED driver to your power source (e.g., household mains). Typically, these are marked 'L' (Live) and 'N' (Neutral).
  3. Connect Output: Connect the DC output wires of the LED driver to your LED lighting fixture. Ensure correct polarity (positive to positive, negative to negative).
  4. Secure Connections: Double-check all connections to ensure they are secure and properly insulated. Loose connections can cause hazards or malfunction.
  5. Mounting (if applicable): Mount the LED driver in a suitable location that allows for proper ventilation and protection from environmental factors.
  6. Test: Once all connections are secure and verified, restore power to the circuit and test the LED lights.
Various views of LED driver boards

Figure 1: Overview of different LED Driver Transformer models.

4. Operating Instructions

The LED Driver Transformer operates automatically once correctly installed and powered. It converts the incoming AC voltage to a stable DC voltage and current suitable for your LED lights.

  • Ensure the input voltage supplied to the driver is within its specified range (e.g., 200-240V AC).
  • The driver will supply the specified output voltage and current to the connected LED load.
  • No user interaction is required for operation beyond initial installation.

5. Maintenance

The LED Driver Transformer is designed for long-term, maintenance-free operation under normal conditions. However, periodic checks can help ensure optimal performance and longevity:

  • Keep Clean: Ensure the driver is free from dust and debris, which can impede heat dissipation. Use a soft, dry cloth for cleaning.
  • Inspect Connections: Periodically check all electrical connections for tightness and signs of wear or corrosion.
  • Environmental Conditions: Ensure the operating environment remains within the recommended temperature and humidity ranges.
  • Avoid Moisture: Never expose the driver to water or excessive moisture.

6. Troubleshooting

If your LED lights are not functioning correctly, consider the following troubleshooting steps:

ProblemPossible CauseSolution
LEDs do not light upNo power to driver; Loose connections; Incorrect wiring; Faulty LED or driver.Check power supply; Verify all connections are secure; Ensure correct polarity; Test LED/driver separately if possible.
LEDs flicker or dimUnstable power supply; Overloaded driver; Incompatible LED load; Loose connections.Check input power stability; Ensure LED load is within driver's wattage range; Verify LED compatibility; Secure connections.
Driver gets excessively hotOverloaded; Poor ventilation; Short circuit in LED load.Reduce LED load; Improve ventilation; Check LED wiring for shorts.

If problems persist after troubleshooting, contact customer support.

7. Specifications

General Specifications:

  • Brand: JETTING
  • Item Type: Lighting Transformers
  • Origin: Mainland China
  • Package Dimensions: Approximately 12 cm (L) x 11 cm (W) x 3 cm (H)
  • Package Weight: Approximately 0.018 kg

Model-Specific Specifications:

Please refer to the specific model you have purchased for exact input/output parameters. Below are common variants:

3-9W Model

ParameterValue
Input Voltage200-240Vac
Output Voltage21-80Vdc
Output Current120mA ± 5%
PF Value≥ 0.5
Conversion Efficiency≥ 90%
Product Size23 x 16 x 12 mm
3-9W LED Driver with specifications

Figure 2: 3-9W LED Driver Transformer and its specifications.

5-18W Model

ParameterValue
Input VoltageAC180-265V
Output VoltageDC30-160V
Output Current120mA
PF Value0.5
Conversion Efficiency90%
Product Size25 x 16 x 12 mm
5-18W LED Driver with specifications

Figure 3: 5-18W LED Driver Transformer and its specifications.

8-25W Model

ParameterValue
Input Voltage200-240Vac
Output Voltage24-80Vdc
Output Current290mA ± 5%
PF Value≥ 0.5
Conversion Efficiency≥ 90%
Product Size32 x 20 x 14 mm
8-25W LED Driver with specifications

Figure 4: 8-25W LED Driver Transformer and its specifications.

18-36W Model

ParameterValue
Input Voltage200-240Vac
Output Voltage60-120Vdc
Output Current290mA ± 5%
PF Value≥ 0.5
Conversion Efficiency≥ 90%
Product Size32 x 21 x 13 mm
18-36W LED Driver with specifications

Figure 5: 18-36W LED Driver Transformer and its specifications.

36-50W Model (Approximate)

ParameterValue
Input Voltage175-265V
Output Voltage120-160V
Output Current300mA
PF Value0.5
Conversion Efficiency≥ 90%
Product Size46 x 25 x 19 mm
36-50W LED Driver with specifications

Figure 6: Higher wattage LED Driver Transformer and its specifications.

8. User Tips

  • Match Wattage: Always ensure the total wattage of your LED lights does not exceed the maximum output wattage of the driver. It's often recommended to use a driver that can handle 80-90% of the LED load for optimal longevity.
  • Polarity Check: Double-check the positive (+) and negative (-) connections between the driver and the LEDs. Incorrect polarity can prevent LEDs from lighting up or cause damage.
  • Heat Management: For higher wattage drivers or installations in enclosed spaces, consider additional heat sinks or ensure ample air circulation to prevent overheating, which can shorten the driver's lifespan.

9. Warranty and Support

This product is manufactured under strict quality control standards. Specific warranty details may vary by retailer or region. Please refer to your purchase documentation for warranty terms.

For technical assistance, troubleshooting beyond this manual, or any other inquiries, please contact your seller's customer support or the store where you purchased this product.

© 2024 JETTING. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.