1. Product Overview
The KAWA MINI7 Pro is a compact, high-performance 4K front dashcam designed to provide clear and reliable video recording for your vehicle. It features a stealth display, voice control, WiFi 6 connectivity, and built-in GPS for comprehensive driving data.
Figure 1: KAWA MINI7 Pro Dashcam - Mini Size, Pro-Level 4K, Stealth Display, Smart Voice Control
1.1 Package Contents
Ensure all items are present in the package:
- KAWA MINI7 Pro Dash Cam
- User Manual
- Type-C Cable (3.5m Power Cord)
- Car Charger
- Electrostatic Sticker
- TF Card (64GB or 128GB, depending on purchased SKU)
Figure 2: Diagram of included accessories
Figure 3: Unboxed KAWA MINI7 Pro Dashcam and accessories
1.2 Device Components
Refer to the diagram below for an overview of the dashcam's parts:
Figure 4: KAWA MINI7 Pro Dashcam Component Diagram
- LED Indicator
- Microphone (MIC)
- Function Button
- Holder
- Cooling Hole
- Camera Lens
- Speaker
- Power Port (DC IN)
- TF Card Slot
- Heat-resistant Adhesive Paper
2. Setup and Installation
2.1 TF Card Insertion
- Ensure the dashcam is powered off.
- Locate the TF card slot (9) on the device.
- Insert the TF card into the slot until it clicks into place.
Figure 5: Inserting the TF Card
2.2 Mounting the Dashcam
- Clean the area on your windshield where you intend to mount the dashcam.
- Remove the electrostatic sticker from its backing and place it on the cleaned windshield in the appropriate position. This sticker helps in easy removal without leaving residue.
- Peel off the adhesive backing from the dash cam holder.
- Firmly stick the dash cam (with its holder) onto the electrostatic sticker.
- Route the 3.5m power cord along the edge of your windshield and dashboard to the car charger port, ensuring it does not obstruct your view or interfere with driving controls.
Figure 6: Dashcam Installation Steps
Figure 7: Dashcam installed on windshield
3. Operating Instructions
3.1 Powering On/Off and Basic Functions
The Function Button (3) controls various operations:
| Operation | Function |
|---|---|
| Press for 1 second | Turn on the dash cam |
| Press for 3 seconds | Turn off the dash cam |
| Press for over 10 seconds | Restart the dash cam |
| Press once | Turn on/off Wi-Fi |
| Press twice | Turn on/off audio recording |
| Press 3 times | Format the TF card |
| Press 5 times | Reset to factory settings |
3.2 Indicator Lights and Screen Display
The LED indicator and stealth display provide visual feedback on the dashcam's status:
| Status | Function |
|---|---|
| Green Steady | Camera is recording |
| Green Slow Flash | Camera is paused |
| Green Fast Flash | TF card error |
The stealth display shows essential icons and turns off automatically after 60 seconds of inactivity to minimize distraction:
- WiFi Icon: Blue when app accesses dashcam, off when WiFi is off.
- MIC Recording Icon: On when recording, off when not.
- TF Card Icon:
- 'X': TF card unavailable.
- 'F': TF card needs formatting (red), turns white during formatting.
- '<16': TF card is less than 16GB.
- Normal icon: TF card is normal.
- '
- Satellite Status Icon: On when GPS acquired, gray when no GPS signal.
- Recording Status Icon: 'REC' for normal, 'REC' with red background for emergency, 'REC' with strike-through for stopped.
- Parking Settings Icon: 'AO' for auto power-off, 'T' for time-lapse, 'P' for parking monitor (blue), 'PT' for both parking monitor and time-lapse.
Figure 8: Stealth Display Icons
3.3 KAWA AUTO App Installation and Connection
The KAWA AUTO app allows for easy control and management of your dashcam:
- Download the "KAWA AUTO" app by scanning the QR code below or searching in your app store.
- Open the app, click on the "+" in the upper right corner, and select "KAWA Dash Cam MINI 7 Pro".
- Follow the in-app instructions to connect your phone to the dashcam's hotspot.
Hotspot Name: KAWA_MINI7Pro_XXXX
Default Password: 12345678
Important Notes:
- The first recording requires an app connection. Once recording starts, the app can be disconnected.
- If VPN is enabled on your phone, disable it before connecting to the dashcam.
- If you forget the hotspot password, press the dashcam's Function Button 5 times to restore the default password.
Figure 9: Scan to download KAWA AUTO App
3.4 Advanced Features
- Loop Recording: The dashcam continuously records, overwriting the oldest video when the TF card is full. Video clip duration can be set to 1, 2, or 3 minutes via the app. For optimal user experience, video clips are limited to 3 minutes when using a 256GB memory card.
- G-Sensor: In the event of a collision or significant vibration, the G-sensor automatically triggers emergency video recording and locks the footage to prevent overwriting.
- Parking Mode (Requires Hardwire Kit): When connected to an optional hardwire kit (sold separately), the dashcam provides 24-hour parking surveillance. It automatically records and locks video upon detecting a collision while parked.
- Time-Lapse Recording (Requires Hardwire Kit): With the hardwire kit, this feature enables 24-hour continuous monitoring, compressing 30 minutes of footage into 1 minute to save storage space.
- Voice Control: Control various dashcam functions hands-free by speaking commands. Supported languages include English, Japanese, French, Russian, Thai, and Vietnamese. For other languages, please use English commands.
| Voice Command | Function |
|---|---|
| "Take photo" | Capture a still image |
| "Lock the video" | Save current recording as an emergency video |
| "Turn on audio" | Enable audio recording |
| "Turn off audio" | Disable audio recording |
| "Turn on WiFi/hotspot" | Activate Wi-Fi hotspot |
| "Turn off WiFi/hotspot" | Deactivate Wi-Fi hotspot |
Video: Overview of KAWA MINI7 Pro features including mini design, voice control, stealth display, and night vision capabilities.
4. Maintenance
4.1 TF Card Usage Guide
- Specifications: Supports 32GB-256GB capacity with Class 10 or higher speed rating.
- Quality: Use high-speed TF cards from reputable brands. Low-quality cards may lead to abnormal video recording or card failure.
- Initial Setup: Format the TF card via the dashcam after initial insertion. Remember to back up any important data beforehand, as formatting deletes all content.
- Routine Maintenance: Format the TF card monthly to maintain optimal read/write performance and prevent data corruption.
- Handling: Avoid inserting or removing the TF card while the dashcam is powered on to prevent damage to the card or device.
- Replacement: Replace the TF card immediately if it experiences read/write errors or abnormal capacity issues due to repeated overwriting.
5. Troubleshooting (FAQs)
- TF card incompatible: If the dashcam prompts about an incompatible TF card, follow the voice prompts to format it. If the issue persists, replace the TF card with a compatible one (Class 10 or higher, 32GB-256GB).
- Wi-Fi shows unavailable on phone (No Internet Connection): This is normal as the dashcam's Wi-Fi is a local hotspot. Ignore the warning and reconnect the dashcam via the KAWA AUTO app.
- Cannot find recorded video: In the KAWA AUTO app, navigate to "Live Preview > Album" to view all recorded videos.
- Dash cam not recording: Try resetting the dashcam (press Function Button for over 10 seconds) or replacing the TF card.
- Emergency recording frequently: The G-sensor sensitivity might be too high. Adjust the sensitivity settings in the KAWA AUTO app or turn it off if not needed.
- Forgot the modified hotspot password: Press the Function Button 5 times to reset the dashcam to factory settings, which will restore the default password (12345678).
- App crashes or lags: Avoid using the dashcam's Wi-Fi in environments with multiple devices or strong signal interference. Ensure your phone's Wi-Fi is stable.
- Unable to connect to the dashcam: Check your phone's permissions for the KAWA AUTO app. If necessary, restart the app, restart your phone, and retry the connection.
- Dash cam not working: Ensure the device is powered with 5V=2A. Check if the car charger and the device's power interface are working properly.
6. Specifications
| Parameter | Value |
|---|---|
| Product Type | DASH CAMERA |
| Model | MINI 7 Pro |
| Camera Resolution | 4K (3840x2160) @ 30FPS 3K (2880x1620) @ 30FPS 1440P (2560x1440) @ 30FPS HDR |
| Wide Angle | 150° |
| Special Features | Voice Control; Stealth Display; G-Sensor; Real Time Surveillance; WiFi Function; Parking Monitor; Speed and Coordinates Recording; NightShot Function; Audio Recorded; Loop-Cycle Recording |
| Working Temperature | -20°C to 65°C (-4°F to 149°F) |
| Storage Temperature | -30°C to 80°C (-22°F to 176°F) |
| TF Card Capacity | 32GB-256GB |
| Power Supply | 5V ≈ 2A |
| Power Interface | Type-C |
| Video Code | H.265 |
| Video Format | MP4 |
| GPS Logger | Internal |
| Certifications | CE, FCC, RoHS, WEEE |
IMPORTANT WARNING:
Please use the original car charger, USB cable, or Hardwire Kit provided with the device (the Hardwire Kit is sold separately). If using non-original accessories, ensure the output voltage does not exceed 5V, as higher voltage may damage the device.
7. User Tips
- Discreet Installation: The compact size of the MINI7 Pro allows for a discreet installation that doesn't obstruct your view.
- Voice Control Convenience: Utilize voice commands for hands-free operation, such as taking photos or locking videos, to maintain focus on the road.
- App Connectivity: The KAWA AUTO app offers a user-friendly interface for quick connection and easy menu navigation.
- Parking Surveillance: For 24/7 parking monitoring and time-lapse features, consider purchasing and installing the optional hardwire kit.
- TF Card Management: Regularly format your TF card (monthly is recommended) to ensure optimal performance and prevent recording issues. Always back up important footage before formatting.
- G-Sensor Sensitivity: If you find the dashcam frequently triggering emergency recordings, adjust the G-sensor sensitivity in the app to suit your driving conditions.
- Wi-Fi Troubleshooting: If experiencing issues connecting to the dashcam's Wi-Fi, ensure no VPN is active on your phone and check the app's permissions. Restarting the app or device can often resolve minor connectivity problems.
8. Warranty and Support
For technical support, warranty inquiries, or further assistance, please contact KAWA customer service:
- Email: support@kawa-in.com
- Website: www.kawa-in.com
- Manufacturer: KAWA ELECTRONICS COMPANY LIMITED
- Address: FLAT A 21/F CHEUNG LEE IND BLDG 9 CHEUNG LEE ST CHAI WAN HONG KONG
You can also download the KAWA AUTO app for additional resources and support:
Scan this QR code to download the KAWA AUTO App.