1. Product Overview
The AUXITO T15 W16W LED bulbs are designed to replace original halogen bulbs, offering high brightness, energy efficiency, and a long lifespan. They feature a shock-resistant and temperature-tolerant design, enhancing illumination and warning effects for various vehicle models.
Figure 1: AUXITO T15 W16W LED bulbs with packaging, highlighting Canbus compatibility, 360° illumination, longer lasting, and low power consumption.
Figure 2: Close-up of the LED bulb showing HD projector lens design for more focused and stronger penetration, and 360° uniform illumination.
2. Safety & Warnings
- CHOKING HAZARD: Small parts. Not for children under 3 years.
- Exclusively for DC12V vehicle electrical systems. Never connect to 24V power sources to prevent LED burnout.
- Handle with care during installation; do not touch LED chips with sharp objects to prevent damage.
- Avoid touching the lamp body after illumination to prevent burns from high temperatures.
- Do not disassemble the lamp body; doing so will void the warranty.
- For turn signal/brake light models, ensure LED power compatibility to prevent flickering or failure.
3. Setup & Installation
Installation is a direct plug-in process, requiring no modifications.
- Preparation: Before installation, turn off the vehicle power and remove the key from the ignition to prevent short circuits.
- Remove Original Bulb: Locate the original bulb socket. Pinch the socket and twist to remove the original bulb, or pull it straight out.
- Install LED Bulb: Align the AUXITO LED bulb with the socket and insert it fully. Gently shake the bulb to confirm secure seating.
- Test Illumination: Turn on the vehicle power to test the new LED bulb's illumination.
- Troubleshooting (No Light): If the light fails to illuminate, remove the bulb, reverse its orientation (swap polarity), and reinsert. Ensure secure seating before replacing the socket cover.
Figure 3: Installation guide showing three steps: removing the old bulb, inserting the new AUXITO LED bulb, and connecting the socket. Compatible with T15, 912, 921, 906, 904, 902, 922, W16W, etc.
4. Operating Instructions
These LED bulbs are designed for use as reverse lights, tail lights, and brake lights, providing significantly brighter illumination compared to standard halogen bulbs.
Figure 4: Visual comparison of vehicle rear lights, showing AUXITO LED bulbs are significantly brighter (600%) than standard halogen bulbs.
The enhanced brightness improves visibility for the driver, especially when reversing, and increases the visibility of your vehicle to others.
Figure 5: Demonstration of improved visibility with AUXITO LED reverse lights, showing clearer views from both the rear view camera and outside mirrors.
5. Maintenance
- Keep the bulbs clean and free from dirt or debris for optimal performance.
- Do not attempt to disassemble or modify the LED bulb. This can damage the product and void the warranty.
- Avoid touching the LED chips directly with bare hands or sharp objects.
6. Troubleshooting
- Light Does Not Illuminate: If the bulb does not light up after installation, remove it, flip it 180 degrees to reverse polarity, and reinsert it. Ensure it is seated securely.
- CANBUS Error / Flickering: Some vehicles equipped with a CANBUS system may experience flickering or error warnings. While these bulbs are designed to be CANBUS compatible, certain sensitive vehicle models (e.g., 2019 Fiat Ducato) may still trigger an error. In such cases, suitable decoders (resistors) may be required to resolve the CANBUS issues. These decoders are not included with the bulbs.
- Flickering (Turn Signal/Brake Lights): If using for turn signals or brake lights, ensure the vehicle's electrical system is compatible with LED power requirements to prevent flickering.
7. Specifications
| Feature | Specification |
|---|---|
| Product Name | LED Light Bulb |
| Model Name | 81K T15 W16W LED |
| Batch/Serial Number | AUX-010 |
| Brand Name | AUXITO |
| Voltage | 12 V (DC12V) |
| Interface Type | T15 |
| Socket Type | T15 W16W T16 912 921 |
| Item Type | Reverse Lights |
| Application | For Car reverse light, tail light, brake light |
| Lamp Beads | 81pcs 1516 SMD |
| Color | 6500K White |
| Lifespan | 30000 hrs |
| Item Weight | 40g |
| Features | Plug and Play, 1:1 with Halogen lamp, 360 Lighting, Canbus No Error, Projector With Lens |
| Origin | Mainland China |
Figure 6: Exploded view diagram of the LED bulb components, detailing HD projector lens, 81pcs LED chips, aviation aluminum body, built-in intelligent IC, EMI-free, smart temp control, and fast heat dissipation.
8. User Tips
- While these bulbs are advertised as Canbus error-free, some specific vehicle models, particularly newer European cars, might still display a bulb-out warning. If this occurs, consider installing additional load resistors (decoders) to resolve the issue.
- Always double-check the bulb type required for your vehicle's specific light position (reverse, brake, tail) before purchasing and installing to ensure compatibility.
9. Warranty & Support
Manufacturer Information:
Manufacturer: SHENZHEN TUYAO AUTO ACCESSORIES CO.,LTD
Address: NO.504, BUILDIND 225, BULONG ROAD, MAANTANG COMMUN BANTIAN STREET, LONGGANG SHENZHEN 518028 GUANGDONG
E-mail/Tel: Tuyao_AF@163.com / +86 15220052490
EU Authorized Representative:
Company: APEX CE SPECIALISTS LIMITED
Address: Grafenberger Allee 277, 40237 Düsseldorf, DE
Contact: Wells Yan
Email: Info@apex-ce.com
Tel: +49 21312066043
Warranty Exclusions:
The following conditions are beyond the scope of warranty:
- CANBUS Problem: Issues arising from vehicle CANBUS systems requiring additional decoders not supplied with the product.
- Installation Problem: Inability to install bulbs due to limited installation space in certain vehicles.
- Natural Disaster: Damages due to irresistible natural disasters like earthquake, flood, etc.