Fosi Audio Magnetic Back Clip

Contents

Fosi Audio Magnetic Back Clip User Manual

Mobile Phone Magnetic Back Clip for DAC Dongles and Wired IEM Earphones

1. Introduction

Thank you for choosing the Fosi Audio Magnetic Back Clip. This accessory is designed to securely attach your portable DAC dongle to your smartphone, providing a convenient and organized audio setup for use with wired in-ear monitors (IEMs) or headphones.

Fosi Audio Magnetic Back Clip attached to a smartphone, holding a DAC dongle, with wired in-ear monitors (IEMs) connected.

Figure 1: Magnetic Back Clip in use with a smartphone, DAC, and IEMs.

2. Package Contents

  • Fosi Audio Magnetic Back Clip
  • Adhesive Metal Ring (for non-MagSafe compatible devices)
A close-up view of the Fosi Audio Magnetic Back Clip, showing its textured surface and elastic band.

Figure 2: Fosi Audio Magnetic Back Clip.

3. Setup Instructions

  1. For MagSafe Compatible Devices (e.g., iPhone 12 and newer):
    • Simply align the Fosi Audio Magnetic Back Clip with the MagSafe area on the back of your smartphone or MagSafe-compatible case. The magnets will automatically snap it into place.
  2. For Non-MagSafe Compatible Devices:
    • Clean the back surface of your smartphone or phone case thoroughly with an alcohol wipe and let it dry completely.
    • Peel off the protective film from the adhesive side of the included metal ring.
    • Carefully center and press the metal ring firmly onto the desired location on the back of your phone or case. Apply pressure for about 30 seconds to ensure strong adhesion.
    • Allow the adhesive to cure for at least 1 hour before attaching the magnetic clip.
    • Once the metal ring is securely attached, align the Fosi Audio Magnetic Back Clip with the ring. The magnets will connect.
  3. Inserting Your DAC Dongle:
    • Gently slide your DAC dongle into the elastic band on the Fosi Audio Magnetic Back Clip. Ensure it is snug and securely held by the band.
    • Connect your DAC to your smartphone and your IEMs/headphones to the DAC.
The Fosi Audio Magnetic Back Clip shown alongside its adhesive metal ring, ready for installation.

Figure 3: Magnetic Back Clip with adhesive metal ring for non-MagSafe devices.

A visual representation of the magnetic (MagSafe compatible) attachment of the back clip to a smartphone.

Figure 4: Magnetic attachment mechanism.

4. Operating Instructions

  • Ensure the magnetic clip is firmly attached to your phone or case before use.
  • Verify that your DAC dongle is securely held by the elastic band to prevent accidental dislodgement.
  • The clip provides a stable platform for your DAC, reducing strain on cables and connectors during portable use.
A hand holding a smartphone with the Fosi Audio Magnetic Back Clip securely holding a DAC dongle.

Figure 5: Securely holding a DAC dongle.

5. Maintenance

  • Cleaning: Wipe the surface of the magnetic back clip with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Storage: Store the clip in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
  • Adhesive Ring: If using the adhesive metal ring, avoid frequent removal and reattachment, as this may weaken the adhesive bond.

6. Troubleshooting

  • Clip Not Sticking Securely (Non-MagSafe):
    • Ensure the phone/case surface was clean and dry before applying the metal ring.
    • Apply firm pressure to the metal ring for an extended period during installation.
    • Allow sufficient curing time for the adhesive (at least 1 hour).
  • DAC Dongle Feels Loose in Band:
    • Ensure the DAC is fully inserted into the elastic band.
    • The elastic band is designed to accommodate various DAC sizes; ensure your DAC is positioned centrally for the best grip.
  • Magnetic Connection Feels Weak:
    • Check for any obstructions between the clip and your phone/metal ring.
    • Ensure proper alignment of the clip with the MagSafe area or the installed metal ring.

7. Specifications

FeatureDescription
MaterialPlastic
FeaturesCable Clip, Magnetic Attachment
CompatibilityMagSafe compatible devices, or any smartphone/case with included adhesive metal ring
ColorBlack
DimensionsCompact and lightweight design

8. User Tips

  • This magnetic back clip is ideal for smaller DAC dongles, providing a snug and secure fit.
  • The design helps organize your DAC and cables, reducing cable stress and potential wear.
  • Its strong magnetic connection ensures your DAC stays in place, even with movement.
  • The narrow elastic band design allows for easier access to volume buttons on many DAC dongles compared to wider holders.
  • Fully compatible with iPhone 15 and other MagSafe-enabled devices.

9. Warranty and Support

Fosi Audio products are designed for durability and performance. For any questions or support regarding your Fosi Audio Magnetic Back Clip, please contact our customer service team.

  • Email: support@fosiaudio.com
  • Website: www.fosiaudio.com

Please refer to your purchase documentation for specific warranty details.

© 2024 Fosi Audio. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.