1. Introduction
The CYCPLUS M2 is a smart GPS bike computer designed to track and display various cycling data. It features a 2.5-inch LCD screen, ANT+ and BLE 5.0 connectivity for external sensors, and a long-lasting battery.

Key Features:
- Accurate Positioning: Enjoy rapid 10-second GPS positioning in open environments.
- Large Display: 2.5-inch LCD screen for clear data visibility.
- Long Battery Life: Up to 70 hours of usage on a single charge.
- Smart Features: Auto backlight and auto awakening for convenience.
- Sensor Compatibility: Supports ANT+ and BLE 5.0 sensors for comprehensive data tracking.
2. Package Contents
The following items are included in your CYCPLUS M2 GPS Bike Computer package:

- CYCPLUS M2 GPS Bike Computer
- Bike Computer Mount
- Rubber Pad
- Instruction Manual
- Rubber Band x 3
- Type-C Charging Cable
3. Setup
3.1. Installation Instructions
To install the bike computer mount:
- Overlap the base and rubber mat.
- Hang the rubber rings on the base.
- Cross the rubber rings and secure them to the handlebars.
- Rotate the M2 cycling computer into the base until it clicks securely.
3.2. Button Description
The CYCPLUS M2 features several buttons for control and navigation:
- L1 Button (Left-Front):
- Press: Start/Pause Recording
- Long Press: Power On/Off
- L2 Button (Left-Rear):
- Press: Count Lap
- Long Press: Save Record
- R1 Button (Right-Front):
- Press: Go to next page (in data display) / Modify digit (in settings)
- Long Press: Enter/Quit Settings
- R2 Button (Right-Rear):
- Press: Turn on/off Backlight
4. Operating Instructions
4.1. Power On/Off
- To power on, long press the L1 button.
- To power off, long press the L1 button.
4.2. Starting a Ride
- Long press the L1 button to power on the device.
- Wait for the GPS signal to connect. The GPS icon will light up when connected.
- Press the L1 button to start recording your ride. The recording icon will appear.
4.3. Saving a Record
After your ride, long press the L2 button to save the recording data. The recording icon will disappear once the data is saved.
4.4. Backlight Control
Press the R2 button to turn the backlight on or off. The device also features auto backlight and auto awakening:

- The device will automatically wake up from hibernation after 10 minutes of no displacement and no vibration.
- The backlight automatically turns on between 18:00 and 9:00 the next day.
5. Settings
To enter the settings menu, long press the R1 button. Press the R1 button repeatedly to cycle through the different setting pages (C1-C8). Long press R1 again to exit settings.
5.1. ANT+ Sensor Connection (C2)
The M2 maximizes compatibility by working perfectly with ANT+ sensors. Multiple sensors can be connected at once.

- Long press R1 button to enter settings.
- Short press R1 button until C2 is displayed.
- Press L1 button to start searching for ANT sensors.
- Data will appear on the screen when a sensor has been connected.
- The device will return to the home page after 10 seconds.
To Unpair Sensors (C9):
- Switch to C9 page in settings.
- Press the L1 button to unpair all paired sensors.
5.2. Wheel Circumference Setting (C3)
- Long press R1 button to enter settings.
- Short press R1 button until C3 is displayed.
- Press L1 button to start setting. The first digit will flash.
- Press R1 button to modify the flashing digit.
- Press L2 button to switch to the next settable digit.
- Repeat steps 4 and 5 until the desired circumference is set.
- Press L1 button to finish setting. All digits will flash.
- Long press R1 button to return to the home page.
5.3. Time Zone Setting (C4)
- Long press R1 button to enter settings.
- Short press R1 button until C4 is displayed.
- Press L1 button to start setting. The time zone digits will flash.
- Press R1 button to modify the time zone. Refer to the Time Zone Setting Comparison table below.
- Press L1 button to finish setting. The time zone digits will flash.
- Long press R1 button to return to the home page.
| UTC+1 | UTC+2 | UTC+3 | UTC+4 | UTC+5 | UTC+6 |
|---|---|---|---|---|---|
| +1 | +2 | +3 | +4 | +5 | +6 |
| UTC+7 | UTC+8 | UTC+9 | UTC+10 | UTC+11 | UTC+12 |
| +7 | +8 | +9 | +10 | +11 | +12 |
| UTC-1 | UTC-2 | UTC-3 | UTC-4 | UTC-5 | UTC-6 |
| -1 | -2 | -3 | -4 | -5 | -6 |
| UTC-7 | UTC-8 | UTC-9 | UTC-10 | UTC-11 | UTC-12 |
| -7 | -8 | -9 | -10 | -11 | -12 |
5.4. Speed Unit Setting (C5)
- Long press R1 button to enter settings.
- Short press R1 button until C5 is displayed.
- Press L1 button to start setting. The unit (KMH or MPH) will flash.
- Press R1 button to switch between KMH and MPH.
- Press L1 button to finish setting. The unit will flash.
- Long press R1 button to return to the home page.
5.5. Temperature Unit Setting (C6)
- Long press R1 button to enter settings.
- Short press R1 button until C6 is displayed.
- Press L1 button to start setting. The unit (°C or °F) will flash.
- Press R1 button to switch between °C and °F.
- Press L1 button to finish setting. The unit will flash.
- Long press R1 button to return to the home page.
5.6. Factory Reset (C7)
- Long press R1 button to enter settings.
- Short press R1 button until C7 is displayed.
- Press L1 button to start setting.
- Long press L2 button to restore factory settings. The computer will turn off automatically after reset.
5.7. Odograph Setting (C8)
- Long press R1 button to enter settings.
- Short press R1 button until C8 is displayed.
- Press L1 button to start setting. The first digit of the odograph will flash.
- Press R1 button to modify the flashing digit.
- Press L2 button to switch to the next settable digit.
- Repeat steps 4 and 5 until the desired odograph value is set.
- Press L1 button to finish setting. All digits will flash.
- Long press R1 button to return to the home page.
6. App Connection
The CYCPLUS M2 can connect to the "CYCPLUS Fit" app for more detailed data viewing and analysis. Scan the QR code or search for "CYCPLUS Fit" on Google Play (Android) or the App Store (iOS) to download the app.

7. Specifications
| Feature | Specification |
|---|---|
| Model Number | M2 |
| Display Size | 2.5 inch LCD |
| Display Color | Black and White |
| Product Dimensions | 70 x 70 x 21.5 mm |
| Product Weight | 69 g |
| Battery Capacity | 1000 mAh 3.7 V |
| Using Time | 70 hours |
| Charging Interface Type | Type-C |
| Charging Time | Nearly 2.5 hours |
| Memory Capacity | 150 hours |
| App Connection | BLE 5.0 |
| Peripheral Connection | ANT+ |
| Supported Peripherals | Speed sensor, Cadence sensor, Heart rate monitor, Powermeter |
| Waterproof Level | IPX6 (Rain-proof, not soakable) |
| Automatic Sleep | Yes |
| Auto-pause | Yes |
| Navigation | No |
| Touch Screen | No |
| Language | English |
| Origin | Mainland China |
7.1. Tire Circumference Chart
Use this chart for your reference. Tire size is shown on the side of a tire. Tire circumference may vary depending on tire pressure.
| ETRTO | Size | L(mm) | Inch | ETRTO | Size | L(mm) | Inch |
|---|---|---|---|---|---|---|---|
| 47-203 | 12x1.75 | 935 | 28-590 | 26x1-1/8 | 1970 | ||
| 54-203 | 12x1.95 | 940 | 12 | 37-590 | 26x1-3/8 | 2068 | |
| 40-254 | 14x1.50 | 1020 | 14 | 37-584 | 26x1-1/2 | 2100 | 26 |
| 47-254 | 14x1.75 | 1055 | 650C Tubular 26x7/8 | 1920 | |||
| 40-305 | 16x1.50 | 1185 | 20-571 | 650x20C | 1938 | ||
| 47-305 | 16x1.75 | 1195 | 16 | 23-571 | 650x23C | 1944 | |
| 54-305 | 16x2.00 | 1245 | 25-571 | 650x25C 26x1(571) | 1952 | ||
| 28-349 | 16x1-1/8 | 1290 | 40-590 | 650x38A | 2125 | ||
| 37-349 | 16x1-3/8 | 1300 | 40-584 | 650x38B | 2105 | ||
| 32-369 | 17x1-1/4(369) | 1340 | 25-630 | 27x1(630) | 2145 | ||
| 40-355 | 18x1.50 | 1340 | 28-630 | 27x1-1/8 | 2155 | 27 | |
| 47-355 | 18x1.75 | 1350 | 18 | 32-630 | 27x1-1/4 | 2161 | |
| 32-406 | 20x1.25 | 1450 | 37-630 | 27x1-3/8 | 2169 | ||
| 35-406 | 20x1.35 | 1460 | 40-584 | 27.5x1.50 | 2079 | ||
| 40-406 | 20x1.50 | 1490 | 50-584 | 27.5x1.95 | 2090 | ||
| 47-406 | 20x1.75 | 1515 | 54-584 | 27.5x2.1 | 2148 | 27.5 | |
| 50-406 | 20x1.95 | 1565 | 57-584 | 27.5x2.25 | 2182 | ||
| 28-451 | 20x1-1/8 | 1545 | 18-622 | 700x18C | 2070 | ||
| 37-451 | 20x1-3/8 | 1615 | 20 | 19-622 | 700x19C | 2080 | |
| 37-501 | 22x1-3/8 | 1770 | 22 | 20-622 | 700x20C | 2086 | |
| 40-501 | 22x1-1/2 | 1785 | 23-622 | 700x23C | 2096 | ||
| 47-507 | 24x1.75 | 1890 | 24 | 25-622 | 700x25C | 2105 | |
| 50-507 | 24x2.00 | 1925 | 28-622 | 700x28C | 2136 | ||
| 54-507 | 24x2.125 | 1965 | 30-622 | 700x30C | 2146 | ||
| 25-520 | 24x1(520) | 1753 | 32-622 | 700x32C | 2155 | ||
| 24x3/4 Tubular | 1785 | 700C Tubular | 2130 | 700C | |||
| 28-540 | 24x1-1/8 | 1795 | 35-622 | 700x35C | 2168 | ||
| 32-540 | 24x1-1/4 | 1905 | 38-622 | 700x38C | 2180 | ||
| 25-559 | 26x1(559) | 1913 | 40-622 | 700x40C | 2200 | ||
| 32-559 | 26x1.25 | 1950 | 42-622 | 700x42C | 2224 | ||
| 37-559 | 26x1.40 | 2005 | 44-622 | 700x44C | 2235 | ||
| 40-559 | 26x1.50 | 2010 | 45-622 | 700x45C | 2242 | ||
| 47-559 | 26x1.75 | 2023 | 47-622 | 700x47C | 2268 | ||
| 50-559 | 26x1.95 | 2050 | 54-622 | 29x2.1 | 2288 | 29 | |
| 54-559 | 26x2.10 | 2068 | 56-622 | 29x2.2 | 2298 | ||
| 57-559 | 26x2.125 | 2070 | 60-622 | 29x2.3 | 2326 | ||
| 58-559 | 26x2.35 | 2083 | |||||
| 75-559 | 26x3.00 | 2170 |
8. Maintenance
8.1. Data Recording and Memory
- To start recording data, press the L1 button after powering on.
- Always long press the L2 button to save your ride data after finishing.
- When the memory is full, the computer will overwrite previous records chronologically.
8.2. Cleaning
Wipe the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
8.3. Waterproofing
The device is IPX6 waterproof, meaning it is rain-proof. However, it is not designed to be soaked in water for extended periods.
9. Troubleshooting
9.1. GPS Signal Issues
If the device takes a long time to acquire a GPS signal, ensure you are in an open, barrier-free area. Remain static for a few minutes after powering on to allow the device to connect to satellites.
9.2. Display Readability
If the display's readability or contrast is low, ensure the backlight is on (press R2 button). Consider using the device in appropriate lighting conditions for optimal visibility.
10. User Tips
- Explore Features: The CYCPLUS M2 is a great counter, very nice and functional. Take time to explore all its features and settings to get the most out of your cycling experience.
- Regular Data Saving: Always remember to long press the L2 button to save your ride data to prevent loss.
- App Integration: Connect to the "CYCPLUS Fit" app to view and analyze your ride data in more detail.
11. Warranty and Support
Company: Chengdu Chendian Intelligent Technology Co., Ltd.
Address: No. 88, Tianchen Road, Chengdu, Sichuan Province, China
Warranty: Free repair or replacement within 2 years for damage not caused by human factors.
Contact: steven@cycplus.com
To continuously improve product functionality and user experience, the design, features, or accessories of the product may be adjusted. The actual item received may differ from the description in this manual. Please refer to the physical product as the final reference. The company reserves the right to modify products without prior notice. Thank you for your understanding and support!
12. Compliance Information
12.1. FCC Statements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
12.2. Safety Warning
WARNING
Keep it out of the reach of children. Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention immediately.