1. Introduction
The ATS-20 Plus Si4732 is an advanced portable shortwave radio receiver designed for enthusiasts and casual listeners alike. This upgraded version of the ATS-20 radio features a convenient Type-C input for charging and connectivity. It is capable of receiving a wide range of frequency bands, including FM, AM (Medium Wave & Shortwave), Long Wave, and Single Sideband (SSB), which encompasses both Lower Sideband (LSB) and Upper Sideband (USB).
Key functionalities include a radio search feature for easily finding broadcasts, and the ability to directly input frequencies. For amateur radio operators, a dedicated HAM band quick channel provides swift access to common HAM radio frequencies.
Designed for portability, the device is equipped with a clear 0.96-inch color display, ensuring a smooth and readable user experience. It also includes a 3.5mm stereo earphone jack for private listening (stereo earphones are not included). The robust handheld casing is crafted from durable, wear-resistant aluminum alloy, contributing to its longevity and reliability.
Power is supplied by a built-in large-capacity lithium battery, offering extended usage times. The included Type-C cable facilitates charging with a maximum current of 1.5A. The integrated Si4732 chip is renowned for its high sensitivity and selectivity, guaranteeing stable performance and excellent reception across all supported bands, even for weaker signals.
2. Package Contents
Upon unboxing, please ensure all the following items are present:
- 1 x Radio Receiver (ATS-20+ Si4732)
- 1 x Telescopic Antenna
- 1 x Type-C USB Charging Cable
Note: Other products shown in promotional images are not included.
3. Safety & Warnings
Warning!
- This product is intended for adult use only.
- Keep the device out of reach of children and pets to prevent accidental injury or ingestion of small parts.
- Before initial use, carefully check that all components are correctly installed and secured.
- If you observe any abnormal noise or equipment malfunction during operation, immediately cease use of the device.
- Always follow all instructions provided in this manual for proper use. Misuse may lead to harm or damage to the device.
- Store the product in a dry and shaded environment, away from high temperatures, excessive humidity, and direct sunlight.
4. Product Overview
Familiarize yourself with the components and controls of your ATS-20+ radio receiver.

Features the display, tuning knob, and various function buttons.

Includes USB download, power switch, Type-C charge, headphone jack, and ANT connector.

Shows the integrated speaker grill.
Controls and Ports:
- Display: 0.96-inch color screen for frequency and status information.
- TUNE/BFO/ATS Knob: Used for tuning frequencies, adjusting Beat Frequency Oscillator (BFO) for SSB, and potentially for Automatic Tuning System (ATS).
- BAND+ / BAND- Buttons: For cycling through frequency bands.
- VOL+ / VOL- Buttons: For adjusting the volume level.
- STEP Button: To change the tuning step size.
- AGC Button: Activates or deactivates Automatic Gain Control.
- BW Button: Adjusts the bandwidth for reception.
- MODE Button: Switches between reception modes (FM, AM, LSB, USB).
- OFF/ON Switch: Power switch for the device.
- TYPE-C Charge Port: For connecting the Type-C USB cable to charge the internal battery.
- Charge LED: Indicator light for charging status.
- Headphone Jack: 3.5mm stereo output for private listening.
- USB Download Port: For potential firmware updates or data transfer (specific cable for this function may not be included).
- ANT Connector: BNC connector for attaching the external antenna.
5. Setup
5.1 Initial Inspection
Before using your ATS-20+ radio receiver for the first time, carefully inspect the unit and all included accessories to ensure there is no visible damage.
5.2 Charging the Battery
The radio features a built-in rechargeable lithium battery. To charge the device:
- Connect the included Type-C USB charging cable to the TYPE-C Charge Port on the rear panel of the radio.
- Connect the other end of the USB cable to a compatible USB power source (e.g., a computer USB port, a USB wall adapter, or a power bank).
- The Charge LED will illuminate to indicate that charging is in progress.
- Allow the device to charge fully before first use. The maximum charging current is 1.5A.
5.3 Attaching the Antenna
For optimal reception, especially on shortwave bands, it is crucial to properly attach the antenna:
- Locate the BNC ANT connector on the rear panel of the radio.
- Align the provided telescopic antenna's BNC connector with the radio's ANT connector.
- Push the antenna connector onto the radio's connector and twist it clockwise until it locks securely into place.
- Extend the telescopic antenna fully for best reception.
6. Operating Instructions
6.1 Power On/Off
To power on the radio, slide the OFF/ON switch on the rear panel to the 'ON' position. To power off, slide it to the 'OFF' position.
6.2 Band Selection
Use the BAND+ and BAND- buttons on the front panel to cycle through the available frequency bands: FM, AM (MW & SW), LW, LSB, and USB.
6.3 Tuning
Once a band is selected, use the large TUNE/BFO/ATS knob to adjust the frequency. Rotate clockwise to increase frequency and counter-clockwise to decrease it.
6.4 Volume Adjustment
Adjust the audio output level using the VOL+ and VOL- buttons.
6.5 Step Size
Press the STEP button to change the tuning increment (e.g., 1 kHz, 5 kHz, 10 kHz). Select an appropriate step size for fine-tuning or quick scanning.
6.6 AGC (Automatic Gain Control)
The AGC button controls the Automatic Gain Control feature, which helps maintain a consistent audio output level despite varying signal strengths. Toggle it on or off as needed for different reception conditions.
6.7 Bandwidth (BW)
Use the BW button to select different audio bandwidths. A narrower bandwidth can help reduce interference and noise, especially on crowded bands, while a wider bandwidth provides fuller audio quality for strong signals.
6.8 Mode Selection (FM, AM, SSB)
Press the MODE button to switch between different demodulation modes:
- FM: For Frequency Modulation broadcasts.
- AM: For Amplitude Modulation broadcasts (Medium Wave and Shortwave).
- SSB (LSB/USB): For Single Sideband reception, used for amateur radio and utility stations. The TUNE/BFO/ATS knob may also function as a BFO control in SSB mode for fine-tuning the pitch of the received audio.
6.9 Radio Search and HAM Band Quick Channel
The radio supports a broadcast search function to automatically find active stations. Additionally, a HAM band quick channel feature allows for rapid access to common amateur radio frequencies. Consult the on-screen menu or specific button combinations for these advanced functions.
7. User Tips
- SSB Tuning: Be aware that the tuning step in SSB mode might be 1 kHz, which can make precise tuning to voice signals challenging. Patience and careful use of the TUNE/BFO/ATS knob are recommended.
- Antenna Security: Ensure the telescopic antenna is securely fastened to the BNC connector to prevent it from becoming loose or sliding down during use.
- Noise Reduction: If you experience excessive noise, even without the antenna connected, try operating the radio in different locations, away from potential sources of electrical interference (e.g., computers, chargers, fluorescent lights).
- Charging Cable: The included Type-C cable is primarily for charging the device. While there is a 'USB download' port, a specific cable for data transfer or firmware updates may not be included or required for general operation.
8. Maintenance
8.1 Cleaning
To clean the radio receiver, use a soft, dry cloth. Do not use liquid cleaners, aerosols, or solvents, as these can damage the device's finish or internal components.
8.2 Storage
When not in use, store the product in a dry and shaded place. Keep it away from extreme temperatures, high humidity, and direct sunlight. Ensure it is stored out of reach of children and pets.
8.3 Battery Care
To prolong the life of the built-in lithium battery, avoid fully discharging it frequently. If storing the device for an extended period, charge it to approximately 50-70% capacity and recharge every few months.
9. Troubleshooting
9.1 No Power
- Ensure the OFF/ON switch is in the 'ON' position.
- Check the battery charge level. If low, connect the Type-C charging cable and allow it to charge.
- Verify that the Type-C charging cable is securely connected to both the radio and the power source.
9.2 No Reception or Weak Signals
- Ensure the antenna is properly attached and fully extended.
- Check that you are on the correct frequency band and mode for the station you are trying to receive.
- Try adjusting the BW (Bandwidth) setting.
- Move to a different location, as buildings, terrain, or electronic devices can interfere with reception.
- Ensure the AGC (Automatic Gain Control) is set appropriately.
9.3 Noisy Reception
- Try adjusting the BW (Bandwidth) to a narrower setting.
- Move away from potential sources of electrical interference (e.g., computers, Wi-Fi routers, power adapters, LED lights).
- Ensure the antenna is fully extended and positioned optimally.
- If the noise is present even without the antenna, it might be internal; try a different power source or location.
9.4 Difficulty Tuning SSB
- SSB reception requires precise tuning. Use the TUNE/BFO/ATS knob carefully.
- The 1 kHz tuning step can make fine-tuning challenging. Make small, incremental adjustments.
9.5 Abnormal Noise or Equipment Error
- Immediately power off the device using the OFF/ON switch.
- Disconnect any cables.
- If the issue persists after restarting, contact customer support.
10. Specifications
| Feature | Detail |
|---|---|
| Model | ATS-20+ |
| Chipset | Si4732 |
| Supported Bands | FM, AM (MW & SW), LW, SSB (LSB & USB) |
| Display | 0.96-inch Color Display |
| Audio Output | Built-in Speaker, 3.5mm Stereo Earphone Jack |
| Charging Interface | Type-C USB |
| Charging Current | Max 1.5A |
| Battery | Built-in Large-Capacity Lithium Battery |
| Shell Material | Aluminum Alloy |
| Dimensions (L x W x H) | Approximately 15 cm x 15 cm x 5 cm |
| Weight | Approximately 0.335 kg |
| Color | As Shown (Typically Black) |
11. Warranty & Support
11.1 Manufacturer Information
Manufacturer: Chongqing Hongcanyu Trading Co., Ltd.
Address: Unit 1-1, Building 4, Unit 1, No. 1580 Zhiyun Avenue, Yudong Street, Banan District, Chongqing, China. Postal code: 500113.
Email: hongtaok6969@outlook.com
Phone: +86 17875509102
11.2 EU Authorized Representative
Representative: AC WORKS CONSULTING Srl
Address: DE-Via Vilfredo Pareto 125
Email: acworksltd@outlook.com
Phone: +49 0039054729444
11.3 Additional Resources
A detailed user manual in PDF format is available for download at: ATS-20+ User Manual (PDF)
12. Frequently Asked Questions (FAQ)
Q: Does this radio receive VHF frequencies?
A: No, the ATS-20+ Si4732 Portable Shortwave Radio Receiver is designed to receive FM, AM (MW & SW), LW, and SSB (LSB & USB) bands. It does not support VHF reception.
Q: Is the radio powered only via USB, or does it also use disposable batteries?
A: The radio features a built-in large-capacity lithium battery for power. It is charged via the Type-C USB port and does not use disposable batteries.