KKMOON AP-6

Contents

KKMOON AP-6 Car Head-Up Display User Manual

OBDⅡ+GPS Smart Gauge High Definition Speedometer

1. Introduction

The KKMOON AP-6 Car Head-Up Display (HUD) is a multi-functional LCD meter designed to enhance driving safety by projecting essential vehicle information directly into the driver's line of sight. It combines OBDⅡ and GPS systems to provide a wide range of data, including speed, RPM, water temperature, voltage, and more. This device helps drivers stay informed without looking down at the dashboard, ensuring focus on the road.

KKMOON AP-6 Car Head-Up Display on a car dashboard showing various metrics like speed, RPM, temperature, voltage, and pressure.

Figure 1: The AP-6 Multi-function LCD meter with OBD2+GPS system and ambient light, installed on a car dashboard.

2. Features

  • Dual System: Supports both OBDⅡ and GPS modes for comprehensive vehicle data.
  • High-Definition Display: Clear and bright display lens, unaffected by external light.
  • Multi-functional Data Display: Shows vehicle speed, engine RPM, water temperature, voltage, driving distance, driving time, fuel consumption, local time, oil temperature, turbine pressure, 100 km acceleration test, altitude, driving direction, number of satellites, and compass.
  • Safety Alarms: Includes overspeed alarm, rotate speed alarm, fatigue driving alert, high water temperature alarm, low voltage alarm, and engine fault alarm.
  • Adjustable Bracket: Allows for two installation methods: on the dashboard or stick to the windshield.
  • Exquisite Design: New tooling design with a clock visible in the right corner.
  • Ambient Light: Integrated ambient light for enhanced aesthetics.

3. Package Contents

Please check the box for the following items:

  • 1 x Car Head-Up Display (AP-6)
  • 1 x OBDⅡ Cable
  • 1 x User Manual
  • 1 x Magic Tape (for installation)

4. Setup and Installation

4.1 Installation Methods

The AP-6 HUD offers two primary installation methods:

  1. Dashboard Placement: Place the HUD directly on your vehicle's dashboard. Ensure it is stable and does not obstruct your view.
  2. Windshield Adhesion: Use the provided magic tape to securely attach the HUD to your windshield. Choose a location that provides optimal visibility without impeding your driving view.

4.2 Connecting the Device

  1. Locate your vehicle's OBDⅡ port. This is typically found under the dashboard on the driver's side.
  2. Connect one end of the provided OBDⅡ cable to the HUD.
  3. Connect the other end of the OBDⅡ cable to your vehicle's OBDⅡ port.
  4. Once connected, the device will power on automatically when the vehicle is started.

4.3 Initial Setup and Mode Selection

The device supports both OBDⅡ and GPS modes. Upon initial power-on, it will attempt to connect via OBDⅡ. If your vehicle does not support OBDⅡ or if you prefer GPS mode, you may need to switch modes.

Note: OBDⅡ mode cannot be used for diesel vehicles. For diesel vehicles, the device needs to be manually switched to GPS mode.

Refer to the "Operating Instructions" section for details on how to switch between OBDⅡ and GPS modes using the device buttons.

Front view of the AP-6 Car Head-Up Display with dimensions: 86mm height, 109mm width. Labels indicate OK button, Left button, Right button, Clock, and Ambient Light.

Figure 2: Front view of the AP-6 HUD showing dimensions and button layout.

5. Operating Instructions

5.1 Button Functions

The device features three main buttons for navigation and settings:

  • OK Button: Used to confirm selections or enter settings menus.
  • Left Button: Used to navigate left, decrease values, or cycle through options.
  • Right Button: Used to navigate right, increase values, or cycle through options.

5.2 Display Modes

The AP-6 operates in two main modes:

  • OBDⅡ Mode: Displays real-time data from your vehicle's On-Board Diagnostics system. This includes vehicle speed, rotate speed (RPM), water temperature, voltage, driving distance, driving time, fuel consumption, local time, oil temperature, turbine pressure, and 100 km acceleration test results.
  • GPS Mode: Utilizes GPS signals to display data. This includes speed, voltage, mileage, driving time, local time, altitude, driving direction, number of satellites, acceleration test results, and compass.

To switch between OBDⅡ and GPS modes, typically press and hold one of the navigation buttons (Left or Right) during startup or access the system settings menu.

5.3 Display Interfaces

The AP-6 offers 9 different display interfaces, allowing you to customize the information layout to your preference. You can cycle through these interfaces using the Left or Right buttons.

A grid of nine different display interfaces for the AP-6 Car Head-Up Display, showing various combinations of speed, RPM, voltage, fuel, temperature, mileage, direction, acceleration, and brake test data.

Figure 3: Examples of the 9 available display interfaces.

5.4 Alarm Functions

The device is equipped with several alarm functions to alert the driver to potential issues:

  • Overspeed Alarm: Alerts when the vehicle exceeds a preset speed limit.
  • Rotate Speed Alarm: Alerts when engine RPM exceeds a preset limit.
  • Fatigue Driving Alert: Reminds the driver to take a break after a set duration of continuous driving.
  • High Water Temperature Alarm: Warns of engine overheating.
  • Low Voltage Alarm: Indicates potential issues with the vehicle's electrical system.
  • Engine Fault Alarm: Notifies of detected engine diagnostic trouble codes (DTCs).

Alarm thresholds can typically be adjusted within the device's settings menu.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the display screen and the device body. Do not use abrasive cleaners or solvents, as they may damage the surface.
  • Storage: If not in use for an extended period, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cable Care: Ensure the OBDⅡ cable is not pinched or excessively bent, which could damage the wiring.
  • Avoid Water: The device is not waterproof. Avoid exposure to water or other liquids.

7. Troubleshooting

  • Device Not Powering On:
    • Check if the OBDⅡ cable is securely connected to both the HUD and the vehicle's OBDⅡ port.
    • Ensure your vehicle's ignition is on.
    • Test the OBDⅡ port with another compatible device if available.
  • No Data Displayed in OBDⅡ Mode:
    • Verify that your vehicle supports the OBDⅡ protocol.
    • For diesel vehicles: OBDⅡ mode is not supported. Switch the device to GPS mode.
    • Ensure the vehicle is running, not just in accessory mode.
  • Inaccurate Speed Reading in GPS Mode:
    • Ensure the device has a clear view of the sky to receive strong GPS signals.
    • Speed accuracy can be affected by tunnels, dense urban areas, or heavy tree cover.
  • Display is Dim or Unreadable:
    • Adjust the brightness settings in the device's menu.
    • Ensure the display lens is clean and free from smudges.

8. Specifications

ParameterDetail
Item TypeCar Head-Up Display
ModelAP-6
MaterialABS + PC
Product ColorBlack
Item Size109mm x 86mm x 75mm
Package Weight400g
Package Size110mm x 110mm x 70mm
Display TypeLCD
System CompatibilityOBDⅡ, GPS

9. User Tips

  • Optimal Placement: Experiment with different dashboard or windshield positions to find the spot that offers the best visibility without obstructing your view of the road.
  • Customizing Display: Take time to explore all 9 display interfaces to find the one that best suits your driving needs and preferences.
  • Alarm Settings: Adjust alarm thresholds (e.g., overspeed, RPM) to match local regulations and your personal driving style for maximum benefit.
  • Diesel Vehicle Note: Always remember to switch to GPS mode if you are using the device in a diesel vehicle, as OBDⅡ mode will not function.

10. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.

11. Compliance and Disposal

This device complies with relevant European Union directives. The "CE" mark, visible on the product and packaging, indicates conformity with health, safety, and environmental protection standards.

The crossed-out wheeled bin symbol, also visible on the product and packaging, indicates that this product should not be disposed of with household waste. It should be handed over to an applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

Refer to the product or its packaging for the exact CE Mark and WEEE (Waste Electrical and Electronic Equipment) symbol.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.