1. Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your LEHX L6 Car Radio Multimedia System. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
The LEHX L6 series offers advanced features including Android 12, CarPlay, Android Auto, GPS navigation, Bluetooth 5.1, DSP audio processing, and various multimedia capabilities, designed to enhance your driving experience.

Figure 1: LEHX L6 Car Radio Multimedia System
2. Setup and Installation
2.1 Before Installation
Before proceeding with the installation, it is recommended to test the unit. Due to potential impacts during long transit, the product's functionality might be affected. Testing it beforehand can prevent issues during installation.
2.2 Rear Interface Description
Familiarize yourself with the rear connections of the unit. The diagram below illustrates the power plug and various input/output interfaces.

Figure 2: Rear Interface Wiring Diagram for L6/L6X/L6 Plus and L5 Pro/L6 Pro series.
- Power Cable: Includes White (Front speaker L+), White/black striped (Front speaker L-), Gray (Front speaker R+), Gray/black striped (Front speaker R-), Green (Rear speaker L+), Green/black striped (Rear speaker L-), Purple (Rear speaker R+), Purple/black striped (Rear speaker R-), Black (Ground Wire/B-), Yellow (Constant Power Supply +12V), Red (Ignition Switch), Orange (Illuminate Backlight), Pink (Reversing camera control line), Brown (Steering Wheel Control-2), Orange/black striped (Steering Wheel Control-1), Blue (Auto Antenna Power).
- RCA Input/Output: Video Input 2 (Front Camera Input), Right Audio Input (AUX R IN), Left Audio Input (AUX L IN), Video Input 1, Video Output, Front Right Audio Output (FR OUT), Front Left Audio Output (FL OUT), Subwoofer Output (SUB WOOF), Microphone Input (MIC), Amplifier Control (AMP CONT).
- Other Connections: BT Antenna, WiFi Antenna, USB1/2 (USB Port), Protocol Box (only for specific models).
Important Wiring Notes:
- When the yellow line B+ and the red line ACC have a 12V positive power at the same time, the unit can be turned on normally.
- The yellow line B+ keeps the power on and the machine has a memory function.
- 8 speaker cables: each cable cannot be grounded, cannot be shared, cannot touch the line, otherwise there will be no sound output, output sound distortion, machine fever and so on.
2.3 Reversing Camera Installation Method
Follow these steps to correctly install your reversing camera:

Figure 3: Reversing Camera Wiring Diagram
- Yellow cable ①: Connect to the navigation reversing video input socket.
- Red cable ②: Connect to the reverse detection line of the navigation adapter (BACK or REVERSE).
- Connect ③ and ④ together: Then connect to the positive pole of the reverse light power supply.
- Black cable ⑤: Connect to the body screw for ground or the negative pole of the reverse light power supply.
Important Note: If the reversing camera is not installed, do not connect the REVERSE/BACK cable to any place. Leave the cable unconnected. Otherwise, the machine may not display properly or may automatically enter reverse mode, causing malfunction. In such a situation, disconnect the REVERSE/BACK line as soon as possible to avoid affecting normal use.
2.4 CANBUS Connection
The CANBUS connection varies for high-end and low-end models. Ensure correct connection to avoid issues like the radio failing to shut down.

Figure 4: CANBUS Connection for High-End and Low-End Models.
Attention: If the CANBUS box and black buckle are connected simultaneously, it may cause the radio to fail to shut down after the car is turned off.
3. Operating Instructions
3.1 General UI and Features
The LEHX L6 Pro features a newly released UI version designed for convenience and aesthetic appeal, meeting daily driving needs.

Figure 5: User Interface Display for L6 Pro.
3.2 CarPlay and Android Auto
The system supports both Apple CarPlay and Android Auto for seamless smartphone integration. Note that Google Play services may be required for Android Auto in some regions.

Figure 6: CarPlay and Android Auto Interface.
- Wired Connection: Simply connect the USB data cable.
- Wireless Connection: Enable Bluetooth and Wi-Fi on your mobile phone, then connect via Bluetooth. The signal is transmitted via Wi-Fi. If Wi-Fi is off, CarPlay/Android Auto will disconnect.
- For Android Auto, you may need to download and install the "Android Auto" app from Google Play. A mobile phone with Android 6.0 or higher is required.
3.3 Audio and DSP Settings
The L6 Pro model features a 5.1 channel DSP with DTS HiFi digital audio authorization, offering advanced sound customization options including surround sound, Trubass, and Phantom Center modes. This technology reduces noise and optimizes sound conversion for high-quality music.

Figure 7: DSP Audio Settings Interface.
3.4 Navigation
The system supports offline and online GPS navigation. Pre-installed offline maps can be updated for free. It supports popular navigation apps like Waze, Navitel, Yandex, and Igo.

Figure 8: Navigation and Split Screen Display.
3.5 Bluetooth Functionality
The LEHX L6 Pro supports Bluetooth 5.1, allowing for mobile phone pairing, music streaming, hands-free calling, and clear communication for safe driving.

Figure 9: Bluetooth 5.1 Interface.
3.6 Voice Control
The system includes AI voice control for convenient operation of various functions, such as navigation, radio, and music playback.

Figure 10: Voice Control Features.
3.7 Steering Wheel Control
The intelligent steering wheel controller allows you to manage functions like changing songs and adjusting volume directly from your steering wheel, enhancing driving convenience and safety.

Figure 11: Steering Wheel Control Interface.
Learning Steering Wheel Controls: Press and hold a button on the original car's steering wheel and find the corresponding button icon on the unit. Click the icon to change its color, indicating successful learning.
3.8 Split Screen Functionality
The split screen feature allows you to use two applications simultaneously, such as navigation and music playback, or a driving recorder and maps.

Figure 12: Split Screen Examples (Maps and DVR, Maps and Music, DVR and Music, Adjustable Button Color).
3.9 Tire Pressure Monitoring System (TPMS)
The intelligent four-tire pressure detector provides real-time temperature visualization. An alarm will activate immediately if tire pressure or temperature limits are exceeded.

Figure 13: TPMS Interface.
3.10 Advanced Driver-Assistance Systems (ADAS) and Digital Video Recorder (DVR)
The ADAS recorder provides 1080P video and clear night image quality. It offers reminders if your car is too close to the vehicle in front or if it drifts from its lane at certain speeds.

Figure 14: ADAS DVR Interface.
3.11 USB and Multimedia Playback
The unit supports USB media playback. Ensure your USB flash disk is formatted to FAT32 for optimal compatibility.
The L6 Pro model features 3 USB ports, while other L6 series models have 2 USB ports. Some models may require an additional USB adapter for rear-view headrest connection.

Figure 15: USB Ports and Video Output for Headrest Connection.
3.12 Radio and DAB+
The system includes a radio module (TDA7708 for L6 Pro) and supports optional DAB+ radio receiver stick for high-quality digital audio broadcasting channels.

Figure 16: DAB+ Ready Interface.
3.13 OBD2 Support
The unit supports OBD2 diagnostics via Vgate Icar2 Bluetooth, allowing you to monitor engine management and diagnostics.

Figure 17: OBD2 Support Interface.
3.14 Customizable Button Lights
The physical buttons on the unit support multiple color display options, allowing for personalization.

Figure 18: Button Light Customization.
3.15 Boot Logo Customization
You can customize the boot logo of the unit. Navigate to Configuration > Car Information > General > Boot Logo. Enter the password (L6/L6Plus: 8888, L6Pro: 3368) and select your desired logo.
Video 1: Demonstration of various features including UI, navigation, DSP, OBD, TPMS, Bluetooth, and boot logo customization.
4. Maintenance
To ensure the longevity and optimal performance of your LEHX L6 Car Radio Multimedia System, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that could damage the surface.
- Software Updates: Periodically check for software updates from the manufacturer to ensure your system has the latest features and bug fixes.
- Connection Checks: Regularly inspect all wiring connections to ensure they are secure and free from damage. Loose connections can lead to performance issues.
- Temperature: Avoid exposing the unit to extreme temperatures.
5. Troubleshooting
This section addresses common problems and provides simple troubleshooting steps. If an issue persists after following these steps, please contact customer support.
5.1 Cannot Boot Normally
- Wiring Check: Ensure the "Yellow" (B+), "Red" (ACC), and "Black" (Ground) wires are correctly connected. The yellow wire connects to constant +12V, red to ignition switch +12V, and black to ground. Incorrect or incomplete connections will prevent the unit from booting.
- Original Car Wiring: Do not directly plug the original car's wiring into the new unit if the colors do not match, as this can cause damage.
- Fuse Check: If the 3 wires are correctly connected but the unit doesn't boot, check the fuse on the yellow wire. If it's broken, replace it. If the fuse is fine, twist the yellow and red wires together, turn on the ignition, and press the power button to test.
- Repeated Fuse Blowing: If fuses blow repeatedly, it indicates a short circuit in the unit's protection circuit. The unit may require professional repair.
5.2 Automatic Shut-down
- Cable Error: If the blue cable (automatic antenna power supply) is connected to the unit's power cable, automatic shutdown will occur. Follow correct wiring methods.
- Unstable Voltage: Test the power supply with a 12V-5A source. If the unit still shuts down automatically, the power supply is faulty.
5.3 Audio Issues (Noise, No Sound)
- Noise: If the original speaker power is too low, noise may occur at high volumes. Avoid excessively high volumes. If the speaker cable is grounded, connect it directly to the unit's speaker cable.
- No Sound After Installation: Check if speaker cables are short-circuited or incorrectly connected. Reconnect if necessary. Ensure the number of speaker cables matches your original car's setup (e.g., 2 speakers need 4 cables).
- No Sound After A While: Disconnect all speaker cables from the unit (do not remove them). Connect an external speaker to the gray and purple wires of the tail line. Test with any green group. If there's sound, the car's speaker line is short-circuited or the speaker is damaged. If no sound, the unit is faulty.
5.4 Remote Control Issues
To test the remote control, use your mobile phone's camera to view the remote's light while pressing buttons. If the light doesn't illuminate, the remote has no power (replace battery). If it lights up, the remote is functional.
5.5 Settings Not Saved (No Memory)
- Ensure the yellow and red lines are connected together (yellow to positive, red to key control).
- If yellow and red are reversed, simply swap their positions.
5.6 Bluetooth Not Working
Turn on the machine, search for its Bluetooth name on your mobile phone, and click "Connect". After connecting, you should be able to make calls and play music via Bluetooth.
5.7 Product Emits Smoke
Replace the FUSE. If the problem persists, the internal circuit is burned, and after-sales service is required.
5.8 Sound Adjustment Issues
- Reset the unit or unplug and replug the power cord.
- If the volume knob is broken, it needs to be replaced.
5.9 Reversing Camera Not Displaying
- Incorrect or Missing Wiring: Refer to section 2.3 for the correct wiring method.
- Broken Camera: If the lamp connected to the camera doesn't light up, the camera is likely broken and needs replacement.
5.10 USB Devices Not Playing
Format your USB flash disk to FAT32. Re-download one or two songs and try again. If it still doesn't work, replace the USB flash drive.
5.11 FM Radio Not Receiving Stations
- Ensure the antenna plug is fully inserted. Check if the antenna is disconnected or the line is faulty.
- Search for stations by pressing the "AS" button for automatic search or using the "before/after" buttons.
- If the above steps don't resolve the issue, unplug the antenna plug and insert a screwdriver or metal strip in its place to act as a temporary antenna.
6. Specifications
| Attribute | Value |
|---|---|
| Brand Name | LEHX |
| Operating System | Android |
| RAM | 6G |
| ROM | 32G |
| Max External Memory | 128G |
| CPU | MTK 8227 - 4core |
| Out Power | 50x4 |
| Voltage | 12 V |
| Item Weight | 1.5kg |
| Item Size | 9inch |
| Display Size | 9" |
| Resolution | QLED 1280*720 |
| Material | Abs+ |
| Certification | CE |
| Origin | Mainland China |
| TF/Micro SD Slot | 0 |
| Din | Double Din |
| Interface | For Chrysler |
| Is touch screen | Yes |
| Built-in Screen | Yes |
| High-concerned chemical | None |
| Special Features | wifi function,Support steering wheel control,Support 4G Network,Support Can-Bus,Built-in GPS,Mobile Phone,MP3 players,Voice Control,dsp,CarPlay,android auto,Reversing Input,Split Screen |
| Digital Media Format | CD,DVD-R/RW,DVD-RAM,VIDEO CD,Mp3,MP4,WMA,JPEG |
| OSD Language | Chinese (Simplified),Chinese (Traditional),albanian,Arabic,Azeri,Irish,ESTONIAN,Belarusian,Bulgarian,Icelandic,Polish,PERSIAN,Boolean text (Dutch South Africa),Danish,German,Russian,French,Filipino,Finnish,Georgian,Haitian Creole,Korean,Dutch,Galicia,Catalan,czech,Croatian,Latin,Latvian,Lithuanian,Romanian,Maltese,Malay,Macedonian,Norwegian,Portuguese,Japanese,Swedish,Serbian,Slovak,Slovenian,Swahili,THAI,Turkish,Welsh,Ukrainian,Hebrew,Greek,Spain's Basque,Spanish,hungarian,Armenian,Italian,Yiddish,hindi,Urdu India,indonesia,English,Vietnamese |
| Subwoofer Output | Support |
| AV-OUT | WiFi version support, 4G version not support |
| RCA cable | 7channels including subwoofer cable |
| Screen Display | QLED9inch 2.5D screen, QLED 1280*720 resolution 4G version IPS |
| INPUT Interface | 2*USB RCA Bluetooth |
| WIFI | Built-in |
| 4G LTE SIM | Optional |
| Steering Wheel Control | Support |
| Mirror Link | Iphone & Android |
| Microphone | Built-in |
| External Microphone | Optional |
| GPS Navigation Map | Built-in offline map free update (support navitel/Igo) |
| Bluetooth Phone Book | Support |
| Bluetooth Music | Support |
| OS Language | Support 46 countries, Russian, Spanish, Portuguese, French, Hebrew.. |
| System | Android |
| Split Screen/Picture in Picture | WIFI version and 8 core 4G SIM support,4 core 4G SIM does not support |
| RDS | Support |
7. User Tips
- Initial Power-up: After successful satellite signal search, the time and date will update automatically.
- Memory Usage: Be aware that the operating system and pre-installed applications will use a portion of the internal memory. Navigation maps, especially for large regions like Europe, can take up significant space.
- Canbus Settings: If your order includes a Canbus, ensure you set the correct Canbus type in the system settings for proper button functionality. Refer to customer service for assistance if needed.
- Professional Installation: It is highly recommended to have the unit installed by professionals to avoid any damage to your car's dashboard or the device itself.
8. Warranty and Support
All products undergo strict quality tests before leaving the factory to ensure high quality. For detailed warranty information, please refer to the official product documentation.
A comprehensive user manual in PDF format is available for download:
For further assistance or technical support, please contact customer service using the provided QR codes:

Figure 19: Customer Service Contact Information (WhatsApp, YouTube, TikTok, LEHX Car Radio).