HORACO ZX-SWG00160

Contents

HORACO 16 Port Gigabit Ethernet Switch User Manual

Model: ZX-SWG00160

1. Introduction

Thank you for choosing the HORACO 16 Port Gigabit Ethernet Switch. This unmanaged network switch is designed to expand your network capacity with high-speed Gigabit Ethernet ports, offering a simple plug-and-play solution for homes and small offices. It requires no configuration, making network expansion straightforward and efficient.

HORACO 16 Port Gigabit Ethernet Switch front view

Figure 1: HORACO 16 Port Gigabit Ethernet Switch

2. Package Contents

Please check the package contents carefully. If any item is missing or damaged, please contact your retailer.

  • 1 x HORACO 16 Port Gigabit Ethernet Switch
  • 1 x AC Power Adapter (DC 12V 1A)
  • 1 x User Manual
  • 1 x Certificate of Conformity
  • Several Footpads
Packing list and product details

Figure 2: Packing List and Environmental Details

3. Product Overview

3.1 Front Panel

The front panel features sixteen (16) 10/100/1000Mbps RJ45 ports. Each port has an associated LED indicator to show its status.

Gigabit Speed Transmission 1000Mbps

Figure 3: Front Panel with 16 Gigabit Ethernet Ports

3.2 Rear Panel

The rear panel includes the power input and the main power indicator LED.

  • DC 12V 1A Power Input: Connect the provided AC power adapter here.
  • PWR LED: Indicates the power status of the switch.
Port Specifications showing rear panel with power input and LED

Figure 4: Rear Panel with Power Input and Indicator

3.3 LED Indicators

LEDStatusDescription
Ports 1-16 (Green)OnLink is established and normal.
OffNo link or link is blocked.
FlashingData is being transmitted or received.
PWR (Green)OnThe switch is powered on.
OffThe switch is powered off.

4. Setup

The HORACO 16 Port Gigabit Ethernet Switch is designed for easy installation with its plug-and-play functionality. No software configuration is required.

4.1 Desktop Installation

  1. Place the switch on a flat, stable surface, ensuring adequate ventilation around the device.
  2. Attach the provided footpads to the bottom of the switch to prevent slipping and protect surfaces.

4.2 Wall-Mounted Installation

The switch features wall-mounting holes on the back for flexible and convenient installation.

  1. Mark the positions for two screws on the wall, matching the distance between the mounting holes on the switch.
  2. Drill pilot holes and insert wall anchors if necessary.
  3. Insert screws into the wall, leaving a small gap between the screw head and the wall.
  4. Align the mounting holes on the switch with the screws and slide the switch down to secure it.
Wall-Mounted Installation example

Figure 5: Wall-Mounted Installation

4.3 Connecting the Switch

  1. Connect the AC power adapter to the DC 12V 1A power input port on the rear panel of the switch, then plug the adapter into a power outlet. The PWR LED should illuminate.
  2. Connect your network devices (e.g., computers, smart TVs, network printers, game consoles, routers, NVRs) to any of the RJ45 ports (1-16) on the front panel using standard Ethernet cables.
  3. The corresponding port LED will light up, indicating a successful connection. If data is being transmitted, the LED will flash.
Plug and Play No Configuration Required with Ethernet cable connection

Figure 6: Plug and Play Connection

5. Operating Instructions

The HORACO 16 Port Gigabit Ethernet Switch is an unmanaged device, meaning it operates automatically without any user configuration. Once connected, it will:

  • Automatically detect the speed of connected devices (10/100/1000Mbps).
  • Support Auto MDI/MDIX, eliminating the need for crossover cables.
  • Provide full-duplex and half-duplex communication modes.
  • Forward data using store-and-forward switching architecture.

Simply connect your devices, and the switch will manage the network traffic efficiently.

6. Maintenance

To ensure optimal performance and longevity of your switch, follow these maintenance guidelines:

  • Ventilation: Ensure the switch is placed in a well-ventilated area. The device features dual-sided ventilation holes for enhanced heat dissipation. Do not block these vents.
  • Cleaning: Use a soft, dry cloth to clean the exterior of the switch. Do not use liquid or aerosol cleaners.
  • Environment: Avoid exposing the switch to extreme temperatures, high humidity, or direct sunlight. Operate within the specified working environment conditions.
  • Power: Use only the provided power adapter. Disconnect power during electrical storms or when unused for long periods.
Powerful Cooling Stable Performance with side vents

Figure 7: Cooling Design for Stable Performance

7. Troubleshooting

If you encounter issues with your switch, refer to the following common troubleshooting steps:

  • No Power:
    • Ensure the power adapter is securely connected to the switch and a working power outlet.
    • Check if the PWR LED is illuminated. If not, try a different power outlet.
  • No Link on a Port:
    • Verify that the Ethernet cable is securely connected to both the switch port and the network device.
    • Check the status of the network device (e.g., ensure it's powered on and its network interface is enabled).
    • Try using a different Ethernet cable.
    • Try connecting to a different port on the switch.
  • No Data Transmission:
    • If the link LED is on but there's no data activity, check the network configuration of the connected device.
    • Ensure there are no IP address conflicts on your network.
    • Restart the connected network device and the switch.

8. Specifications

FeatureDescription
Model NumberZX-SWG00160
Switch TypeUnmanaged Ethernet Switch
Number of Interfaces16 x 10/100/1000Mbps RJ45 ports
Transmission Rate10/100/1000Mbps (Auto-Negotiation)
Switch Capacity32Gbps
Packet Forwarding Rate23.8Mpps
MAC Address Table8K
Communication ModeFull-Duplex & Half-Duplex
Network ProtocolsIEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE 802.3z, IEEE802.3x
Network Medium10Base-T: Cat3, 4, 5 or above UTP/STP (≤100m)
100Base-TX: Cat5 or above UTP/STP (≤100m)
1000Base-TX: Cat5 or above UTP/STP (≤100m)
Power VoltageAC 100-240V, 50/60Hz (Input); DC 12V 1A (Output)
Working Temperature0°C to 40°C (32°F to 104°F)
Storage Temperature-40°C to 70°C (-40°F to 158°F)
Working Humidity10% to 90% non-condensing
Storage Humidity5% to 95% non-condensing
Dimensions (L x W x H)240mm x 102mm x 30mm
Installation MethodDesktop, Wall-mounted
Surge ProtectionPort Surge: Common mode 4KV, Differential mode 2KV (Class C)
Electrostatic ESD: Air 8KV, contact 6KV (Class C)
CertificationsCE, FCC, RoHS
Product Parameters table

Figure 8: Detailed Product Parameters

Product Dimensions diagram

Figure 9: Product Dimensions

9. User Tips

  • This Gigabit Ethernet switch is highly versatile and suitable for connecting a wide range of network devices, including smart TVs, gaming consoles, PCs, network-attached storage (NAS) devices, and more.
  • Its plug-and-play design means you can simply connect your devices and power it on without needing any complex network configuration.
  • For optimal performance, use Cat5e or Cat6 Ethernet cables, especially for Gigabit speed connections.

10. Warranty and Support

HORACO provides a 1-year free warranty for this product, along with lifetime professional technical support. For warranty claims or technical assistance, please contact your retailer or HORACO customer support.

For further detailed information, you may refer to the official user manual PDF: HORACO 16 Port Gigabit Switch User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.