1. Safety Information
Please read all safety instructions carefully before installation and operation to prevent injury or damage.
- Professional Installation: To avert fire, electric shock, and potentially dangerous situations, leave servicing and installation to qualified personnel.
- Power Supply: Use only in cars with a 12-volt negative ground. Ensure the unit is grounded to a negative 12V DC power supply. Do not connect to DC 24V.
- Wiring: If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you might cause a short circuit and fire. Always connect these wires to the power source through the fuse box. Insulate any loose wires with electrical tape.
- Battery Drain: Using the head unit for a long time with the engine off can drain the battery.
- Driving Safety: Do not watch or fix your gaze on the unit's display whilst driving. Avoid excessive volume levels that mask emergency vehicle sirens or road warnings.
- Environment: Do not install the unit in a spot exposed to humidity or water.
- Foreign Objects: Never leave metal items (coins, tools) or liquid inside the unit. If this occurs, turn off the car ignition and consult a mechanic or XTRONS customer support.
- Malfunction: If you hear strange noises, smell strange odors, or detect smoke, immediately turn the car ignition off and unplug the product. Consult a mechanic or XTRONS customer support.
- Modification: Do not disassemble or modify the product. This may result in fire or malfunction.
- Ventilation: Do not block vents or heat dissipation panels to prevent overheating.
- Navigation System: While navigation systems are designed for convenience, they do not replace driver attention and judgment. Always drive safely and adhere to traffic rules.
- Children: The head unit is not a toy. Do not allow children to play with or around the product.
- Flammable Areas: Turn off this unit in locations where inflammable gas or strong magnetic fields are present (e.g., petrol stations).
- Screen Protection: Do not place heavy or dangerous objects on the screen.
- Installation Expertise: Wiring and installation require technical skill. If your car has airbags or other safety equipment, contact a professional car electrician.
2. Product Overview
The XTRONS 10.1'' QLED Car Radio is an advanced single DIN car stereo running on Android 14, designed to provide a superior in-car entertainment and navigation experience. It features an Octa-core processor, built-in Wireless CarPlay and Android Auto, DSP, and 4G connectivity.
Key Features
- Operating System: Android 14
- Display: 10.1'' QLED Screen with 1280x720 resolution
- Processor: Octa-core up to 2.2GHz frequency (12nm)
- Memory: 4GB RAM, 64GB ROM
- Audio: Built-in AKM DSP, High Power Amplifier (4x45W)
- Connectivity: Built-in Wireless CarPlay & Android Auto, Bluetooth 5.0, Dual Band WiFi (2.4G/5G), Global 4G LTE support
- Sensors: Built-in Gyroscope Sensors, Inclinometer
- Video: 2K Video Playback, Screen Mirroring, Support AHD Camera
- Design: Multi-color Light Effects, Adjustable Viewing Angle (vertical, tilt, swivel)

Figure 2.1: Overview of Automotive-grade Hardware and Key Features.
3. Package Contents
Please check the package for the following items:

Figure 3.1: Product Dimensions and Included Accessories.
- 1 x 4G Antenna
- 1 x GPS Antenna
- 1 x SIM Card Slot Cable
- 1 x CANbus Cable
- 2 x USB Cables
- 1 x Camera Cable
- 1 x ISO Wiring Harness
- 1 x Microphone
- 2 x Installation Tools
- 1 x User Manual (this document)
4. Installation and Setup
4.1. Compatibility Information
This unit has a standard single DIN size of 50mm (Height) x 178mm (Width) x 110mm (Depth). It is designed for direct mount and perfect fit into a single DIN slot.
Note: If your vehicle has a Double DIN slot (approx. 100mm height), you may need to purchase the XTRONS TX122L adapter to fit this unit. For some specific car models, a custom fit fascia and ISO cable (with CANbus box) may be required. Please contact XTRONS for detailed information.

Figure 4.1: Compatibility with Single DIN and Double DIN Slots.
4.2. Wiring Harness Diagram
Refer to the diagram below for proper connection of all cables. Incorrect wiring can cause damage to the unit or vehicle.

Figure 4.2: Detailed Wiring Diagram for the Car Radio.
Wiring Connections:
- Original Radio Antenna Port
- 4G Antenna
- GPS Antenna
- USB Port 1
- USB Port 2
- USB Port 3
- SIM Card Slot
- AV-IN, Video Input
- FR-OUT, Front Right Audio Output
- FL-OUT, Front Left Audio Output
- AUX IN L, Audio Input Left
- AUX IN R, Audio Input Right
- AMP CONT, Amplifier Control Cable
- SUB WOOFER, Subwoofer Output
- F-CAM-IN, Front DVR Video Input
- MIC, External Microphone Port
- BACK, Reversing Camera Power Cable
- BT-ANT, Bluetooth Antenna
- BRAKE, Brake In Cable
- WIFI ANT, WiFi Antenna
- CAM IN, Camera Input
- IR OUT
- KEY-1, Steering Wheel Control Key1
- BACK, Reverse Control Cable
- ANT, Automatic Antenna Control
- KEY-2, Steering Wheel Control Key2
- ILLUMINATION, Illumination Cable
- ISO Wiring Harness
4.3. Monitor Assembly
Follow these 4 simple steps to assemble the monitor and the main unit. Ensure the car ignition is off and the key is removed before assembly.
- Connect the display panel to the main unit with the flat cable.
- Align the spring buckles with the main unit.
- Pull the spring buckles on both sides.
- Slide down the display panel to the right place then release the spring buckles.

Figure 4.3: Steps for Assembling the Monitor and Main Unit.
4.4. Screen Position and Angle Adjustment
The display offers full adaptability for optimal viewing and to customize your entertainment space.
- Vertical Movement: Move vertically within 50mm.
- Tilt: Tilt up to 46 degrees.
- Swivel: Swivel up to 22 degrees.

Figure 4.4: How to Adjust Screen Position and Angle.
5. Basic Operations
5.1. Main Screen Introduction
The main screen provides quick access to various functions and information.

Figure 5.1: Main Screen Layout and Icons.
Main Screen Elements:
- Home
- Time
- Volume
- Screenshot
- Screen Off
- Recent Apps
- Back
- Navigation
- Zlink (CarPlay/Android Auto)
- Bluetooth
- Radio
- Settings
- Time & Navigation with Speed (tap to switch between Km/h and mph)
- Music
- Radio
5.2. Touch Screen Gestures
- Clicking: Tap an icon or option to select it.
- Dragging: Slide your finger across the screen or use the scroll bar for up/down movement (e.g., browsing contacts).
- Zooming: Double-tap the screen or use a two-finger pinch/spread gesture (available in compatible apps like browsers).
5.3. Change Launcher
Multiple UI options are available. To switch the UI:
- Navigate to