1. Product Overview
Thank you for choosing AUXITO LED Headlights. This manual provides essential information for the safe and effective use of your new LED headlights. Please read it thoroughly before installation and retain it for future reference.
Figure 1: AUXITO LED H7 Headlights, showcasing 70W power, 30000LM brightness, and Canbus compatibility.
Product Information
- Product Name: AUXITO Car LED Headlight
- Model Numbers: H4, 9003, H7, H8, H9, H11, H16(JP), 9005 HB3, 9006 HB4, 9012 HIR2, 9007 HB5, 9008 H13
- Batch/Serial Number: AUX0001
2. Safety & Warnings
WARNING: CHOKING HAZARD - Small parts. Not for Children under 3 years.
Always handle the LED bulbs with care. Avoid touching the LED chips directly. Ensure the vehicle's power is off before installation to prevent electrical shock.
3. Product Specifications
| Attribute | Specification |
|---|---|
| LED Type | LED (16PCS CSP LED Chip) |
| Voltage | DC 12-18V (for 12V cars only) |
| Wattage | 70W/2 Bulbs |
| Lumen | 30000LM |
| Color Temperature | 6500K (Cool White) |
| Housing Material | Aviation Aluminum |
| Waterproof Rate | IP68 |
| Working Lifetime | 50,000hrs |
| Working Temperature | -40°F ~ +176°F |
| Certification | CE |
Figure 2: AUXITO LED features 16PCS CSP LED chips for superior brightness, no shadows, and longer lifespan compared to standard 6PCS chips.
Figure 3: Road illumination comparison, showing AUXITO LED is 1000% brighter than a halogen lamp with 70W power and 6500K cool white light.
4. Package Contents
The package includes:
- LED Light Bulbs (2 Pcs)
- Product Manual
- Gloves
5. Installation Instructions
Installation typically takes around 10 minutes. Always ensure the vehicle's engine is off and the lights are cool before beginning installation.
Figure 4: Easy installation guide, showing size comparison and basic steps for replacing a halogen bulb with an AUXITO LED bulb.
General Steps for H11, H8, H9, 9008 (H13), 9005 (HB3), 9006 (HB4), 9012 (HIR2), H10 (9145, 9140)
- Remove the original bulb:
- Remove the dust cover (if applicable).
- Disconnect the electrical plugs.
- Turn the original bulb counter-clockwise and carefully remove it from the light housing.
- Insert the LED bulb:
- Align the tab parts of the LED bulb with the groove sections of the light housing.
- Gently insert the LED bulb into the housing.
- Secure the LED bulb:
- While pressing down on the LED bulb, turn it clockwise until it locks securely in place.
- Connect the plug:
- Connect the electrical plug to the LED bulb.
- Finalize:
- Perform a power test to ensure the lights function correctly.
- Replace the dust cover (if applicable).
For visual guidance, refer to the installation diagrams on page 3 of the User Manual (PDF).
Specific Steps for 9004 (HB1) / 9007 (HB5)
- Remove the original bulb:
- Remove the dust cover (if applicable).
- Disconnect the electrical plug.
- Rotate the original bulb holder counter-clockwise and remove it.
- Remove the original bulb.
- Insert the LED bulb:
- Insert the LED bulb into the housing.
- Secure the LED bulb:
- Insert the vehicle's original light holder into the light housing, rotate clockwise, and lock it in place.
- Connect the plug:
- Connect the electrical plug to the LED bulb.
- Finalize:
- Perform a power test.
- Replace the dust cover (if applicable).
For visual guidance, refer to the installation diagrams on page 4 of the User Manual (PDF).
Specific Steps for 9003 (H4)
- Remove the original bulb:
- Remove the dust cover (if applicable).
- Disconnect the electrical plug.
- Press down and release the buckle.
- Remove the original bulb.
- Insert the LED bulb:
- Align the tab parts of the LED bulb with the groove sections of the light housing, then insert the LED bulb.
- Secure the LED bulb:
- Put the buckle back to secure the bulb.
- Connect the plug:
- Connect the electrical plug to the LED bulb.
- Finalize:
- Perform a power test.
- Replace the dust cover (if applicable).
For visual guidance, refer to the installation diagrams on page 4 of the User Manual (PDF).
Figure 5: CANBUS-READY Plug & Play design with an upgraded driver ensures no error or flickering for most vehicles (99%).
Figure 6: Perfect beam pattern designed to prevent blinding oncoming vehicles, offering wider and farther visibility.
6. Operation
Once installed, the AUXITO LED Headlights operate like your vehicle's standard headlights. Turn on your vehicle's lights to activate the LED headlights. No special operation is required.
7. Troubleshooting
Flickering / Error Warning
For some sensitive vehicles (e.g., Jeep, Chrysler, Dodge Ram, GMC, Ford), you might experience flickering or error warnings after changing to LED bulbs. This is often due to the vehicle's CANBUS system. Please contact us for proper decoders/resistors to resolve the problem.
No Light
- Check all wires to ensure they are connected properly and fuses are functioning.
- If only one bulb works, swap the left and right side bulbs to confirm if it's a CANBUS problem or a defective bulb.
Light is Dim
Check to make sure the bulbs are locked securely into place and that the LED chips are clean and intact.
Conditions Beyond Warranty Scope
- CANBUS Problem: Some vehicles equipped with a CANBUS system may experience issues like light flickering or error warnings. Suitable decoders may be required. If decoders do not resolve the issue, a full refund may be available.
- Installation Problem: Some vehicles may not be able to install the bulbs due to limited installation space.
- Natural Disaster: Damages due to irresistible natural disasters such as earthquakes or floods are not covered.
8. Warranty & Support
We offer a 12-month warranty on our products. If you encounter any issues, please feel free to contact us through the platform's messaging system.
How to Get a Warranty Honored
- Take a clear photo showing the code located on the bottom of the lamp.
- Send the pictures to us. We will arrange replacements after verifying the issue.
Figure 7: Example of product code location on the bottom of the lamp for warranty claims.
For further assistance, you may refer to the complete User Manual (PDF).
9. User Tips
- Vehicle Compatibility: Always verify your vehicle's specific bulb type (e.g., H7, H4) before purchasing and installing to ensure proper fitment and function.
- CANBUS Decoders: If your vehicle has a sensitive CANBUS system and you experience flickering or error messages, consider installing additional CANBUS decoders or resistors. These are often necessary for certain car models to ensure error-free operation.
- Secure Installation: Ensure the bulbs are firmly seated and locked into the headlight housing. A loose connection can lead to dim lighting or intermittent operation.
- Cleanliness: Keep the LED chips clean during installation. Any dirt or fingerprints can affect light output and lifespan.
10. Frequently Asked Questions (FAQ)
- Q: My lights are flickering or showing an error on the dashboard. What should I do?
- A: This is often a CANBUS compatibility issue with certain vehicle models. You may need to install additional CANBUS decoders or resistors to resolve the flickering or error warnings. Refer to the Troubleshooting section for more details.
- Q: The light output seems dim after installation. What could be the problem?
- A: Ensure the bulbs are correctly seated and securely locked into their housing. Also, check that the LED chips are clean and unobstructed. A loose connection or dirty chips can reduce light output.
- Q: Are these bulbs compatible with my car?
- A: These bulbs are designed for various models including H4, H7, H8, H9, H11, H16(JP), 9005 HB3, 9006 HB4, 9012 HIR2, 9007 HB5, and 9008 H13. Always verify your vehicle's specific bulb type before purchase to ensure compatibility.
11. Compliance Information
Manufacturer & EU Representative Info
- Manufacturer: SHENZHEN TUYAO AUTO ACCESSORIES CO.,LTD
- EU Authorized Representative (EC REP): APEX CE SPECIALISTS LIMITED
- Address: Grafenberger Allee 277, 40237 Düsseldorf, DE
- Contact: Wells Yan
- Email: Info@apex-ce.com
- Postal code: 40237
- Tel: +49 21312066043
This product complies with relevant EU directives and regulations, indicated by the CE mark. It also adheres to RoHS standards for restricted hazardous substances.
The WEEE symbol (crossed-out wheeled bin) indicates that this product should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Contact your local authority or the retailer for information on where and how you can take this item for environmentally safe recycling.
FC CE RoHS
MADE IN CHINA