1. Introduction
The Tuya WiFi Intelligent Energy Meter is designed for high-precision measurement and real-time monitoring of power production and consumption in solar photovoltaic (PV) systems. This device allows you to track voltage, current, power, power factor, and frequency for both forward (consumption) and reverse (generation) energy flows directly through a mobile application. With its automation features and detailed power statistics, it provides comprehensive insights into your energy usage and generation.
2. Safety Information
- WARNING: To avoid danger of suffocation, keep this plastic bag away from babies and children.
- Always ensure the main power supply is disconnected before attempting any installation or wiring.
- Installation should only be performed by qualified personnel or a licensed electrician to prevent electric shock or damage to the device.
- Do not expose the device to moisture, extreme temperatures, or corrosive environments.
- Do not attempt to open or modify the device; there are no user-serviceable parts inside.
3. Package Contents
Please check the package contents upon unboxing:
- 1 x Tuya WiFi Intelligent Energy Meter Module
- 1 or 2 x Current Transformers (CTs), depending on the purchased variant
- 1 x User Manual (this document)
4. Product Overview
The energy meter consists of a main module and one or two Current Transformers (CTs). The main module processes data and connects to your WiFi network, while the CTs inductively measure current flow without direct contact with the wiring.
Key Features:
- High-Precision Measurement: Accurate monitoring of voltage, current, power, power factor, and frequency.
- Real-time Monitoring: View live energy data for both generation and consumption.
- Mobile App Control: Full control and data visualization via the Tuya Smart application.
- Power Statistics: Daily, monthly, and yearly energy usage and generation reports.
- Automation Function: Set custom power or current thresholds to trigger smart home actions.
- Calibration: Fine-tune measurement accuracy through app-based calibration.
- Easy Installation: Designed for 35mm DIN rail mounting.
Figure 1: Tuya WiFi Energy Meter Module and CTs
5. Specifications
| Parameter | Value |
|---|---|
| Product Name | Tuya Wifi Intelligent Energy Meter Solar PV System Power Production Consumption Bidirectional Monitoring Meter |
| Model | E24493 |
| Batch/Serial Number | ALI1498019535 |
| Input Voltage | AC 100-240V, 50/60Hz |
| Measuring Range | 0.2-80A |
| Accuracy Grade | 1.0 |
| Wireless Type | 2.4GHz WiFi |
| Operating Temperature | -10℃ to 55℃ |
| Material | PC |
| Meter Dimensions | 47 x 47 x 18mm (1.85 x 1.85 x 0.71in) |
| CT Dimensions | 28 x 40mm, Φ10mm aperture, 0.7m cable |
Figure 2: Device Dimensions
6. Setup & Installation
6.1. Mounting
The energy meter is designed for easy installation on a standard 35mm DIN rail. Simply clip the module onto the rail in your electrical panel.
Figure 3: 35mm DIN Rail Mounting
6.2. Wiring Diagram
Follow the wiring diagram carefully. Ensure all connections are secure and made with the power supply turned OFF.
- Connect the Live (L) wire from your AC distribution box to the 'L' terminal on the meter.
- Connect the Neutral (N) wire from your AC distribution box to the 'N' terminal on the meter.
- For each Current Transformer (CT), connect its two wires to the corresponding 'S1' and 'S2' terminals on the meter. For example, if you have two CTs, one might connect to 'A S1' and 'A S2', and the other to 'B S1' and 'B S2'.
- Clip the CTs around the live wires of the circuits you wish to monitor. Ensure the direction of the CT is correct for accurate forward/reverse readings.
Important Note: When installing, please ensure that the circuit measured by the CT is in the same phase as the circuit powering the energy meter module.
Figure 4: Wiring Diagram
Figure 5: Measuring Forward and Reverse Energy
6.3. Mobile App Connection
- Download the