Introduction
Thank you for choosing the Akko RAY68 HE Mechanical Keyboard. This manual provides detailed instructions on how to set up, operate, and maintain your keyboard, ensuring optimal performance and longevity. The RAY68 HE features a 65% layout, magnetic switches with rapid trigger technology, 8K polling rate, RGB lighting, and a built-in 8000mAh battery for versatile connectivity options.

Package Contents
Please ensure all items are present in your package:
- Akko RAY68 HE Mechanical Keyboard
- USB Type-C Cable
- 2.4G Wireless Receiver (for Tri-mode versions)
- Keycap Puller
- Switch Puller
- User Manual (this document)
Specifications
| Feature | Detail |
|---|---|
| Model | RAY68 HE |
| Keyboard Standard | 68 keys (65% Layout) |
| Operation Style | Mechanical (Magnetic Switches) |
| Switches Hot-swap | Yes |
| Rapid Trigger | 0.005mm actuation |
| Polling Rate | 8K |
| Interface Type | USB (Wired), Bluetooth, 2.4G Wireless (Tri-mode) |
| Backlight Type | Multicolor (RGB) |
| Keycup Material | ABS plastic |
| Keycup Printing | Doublshot |
| Battery | 8000mAh (Included) |
| Application | Desktop, Laptop, Tablet |
| Language | English |
| Origin | Mainland China |
| Certification | CE, WEEE |
| Package Dimensions | 38cm (L) x 20cm (W) x 7cm (H) |
| Package Weight | 1.35 kg |
Setup and Connectivity
Mode Switch
The mode switch for the RAY68 Tri-mode version is located under the Caps Lock key. This switch allows you to toggle between Wired, 2.4G Wireless, and Bluetooth modes.

Wired Connection
- Ensure the mode switch is set to the wired position (usually indicated by a cable icon or 'USB').
- Connect the keyboard to your computer using the provided USB Type-C cable.
- The keyboard will be automatically recognized by your system.
Bluetooth Pairing
- Turn on the keyboard.
- Set the mode switch to Bluetooth mode (indicated by 'BT').
- Press and hold Fn + E, Fn + R, or Fn + T to enter Bluetooth pairing mode for BT1, BT2, or BT3 respectively. The indicator light will flash, signifying it's ready for pairing.
- On your device (computer, laptop, tablet), search for Bluetooth devices and select "Akko RAY68 HE" to connect.
- Once connected, the indicator light will stop flashing.
2.4G Wireless Pairing
- Turn on the keyboard.
- Set the mode switch to 2.4G mode (indicated by '2.4G').
- Press and hold Fn + Y to enter 2.4G pairing mode. The indicator light will flash.
- Plug the 2.4G wireless receiver into a USB port on your computer.
- The keyboard should automatically connect to the receiver. The indicator light will stop flashing once connected.
Switches Setting and Calibration
The Akko RAY68 HE features hot-swappable magnetic switches. After replacing switches, it is important to calibrate the keyboard using the dedicated software to ensure proper functionality. Unlisted switches may not work correctly without calibration.

Operation
Combination Keys (Fn Functions)
The keyboard utilizes an Fn key for various secondary functions. Below is a table outlining common Fn key combinations:
| Function | Win Combination | Mac Combination |
|---|---|---|
| F1 | Fn + 1 | Fn + 1 |
| F2 | Fn + 2 | Fn + 2 |
| F3 | Fn + 3 | Fn + 3 |
| F4 | Fn + 4 | Siri |
| F5 | Fn + 5 | N/A |
| F6 | Fn + 6 | N/A |
| F7 | Fn + 7 | Fn + 7 |
| F8 | Fn + 8 | Fn + 8 |
| F9 | Fn + 9 | Fn + 9 |
| F10 | Fn + 0 | Fn + 0 |
| F11 | Fn + - | Fn + < |
| F12 | Fn + = | Fn + > |
| Volume Down | Fn + C | Fn + C |
| Mute | Fn + M | Fn + M |
| Insert | Fn + I | Ins |
| Caps Lock Indicator | Caps | Caps |
| Win Lock | Fn + L | Fn + L |
| Backspace (5s) | Fn + Backspace (5s) | Fn + Backspace (5s) |
| Left Win Key | Fn + L_Win | Fn + L_Win |
| Right Alt Key | Fn + R_Alt | Fn + R_Alt |
| Right Ctrl (3s) | Fn + R_Ctrl (3s) | Fn + R_Ctrl (3s) |
| Left Ctrl | Fn + L_Ctrl | Fn + L_Ctrl |
| 0 (3s) | Fn + 0 (3s) | Fn + 0 (3s) |
Backlight Control
- Fn + \: Adjusts the backlight color through 7 single colors and an RGB cycle in all RGB Lighting modes.
- Fn + L_Alt: In side lighting mode, adjusts the light color through 7 single colors and an RGB cycle.


Battery Level Check
To check the battery level, press Fn + Space. The indicator lights on keys 1-0 will show the battery status:
- Below 30%: Red light on keys 1-2.
- Below 40%: Green light on keys 1-3.
- Below 50%: Green light on keys 1-4.
- Below 60%: Green light on keys 1-5.
- Below 70%: Green light on keys 1-6.
- Below 80%: Green light on keys 1-7.
- Below 90%: Green light on keys 1-8.
- Below 100%: Green light on keys 1-9.
- Fully Charged: Green light on keys 1-0.
Software Configuration
The Akko RAY68 HE keyboard supports custom software for advanced configuration, including key remapping, macro creation, and detailed magnetic switch settings like rapid trigger actuation points. This software allows for precise control over your typing and gaming experience.

Maintenance
- Cleaning: Use a soft, dry cloth to wipe the keyboard surface. For deeper cleaning, remove keycaps using the provided keycap puller and use compressed air to clear debris.
- Keycaps: The keyboard uses durable Doublshot ABS plastic keycaps. Avoid using harsh chemicals or abrasive materials that could damage the keycap legends or surface.
- Switches: The hot-swappable design allows for easy switch replacement. Use the provided switch puller to carefully remove and insert switches. Ensure proper alignment to avoid bending pins.
- Liquid Spills: In case of a liquid spill, immediately disconnect the keyboard from power. Turn it upside down to drain liquid and allow it to dry completely before reconnecting. Do not attempt to use the keyboard while wet.
Troubleshooting
- Keyboard not responding:
- Check the connection cable for wired mode, or ensure the 2.4G receiver is properly plugged in and the keyboard is in 2.4G mode.
- For Bluetooth, ensure the keyboard is paired and selected as the input device on your computer. Try re-pairing if necessary.
- Ensure the keyboard battery is charged.
- Keys not registering or double-typing:
- This could indicate a faulty switch. Since the switches are hot-swappable, try replacing the problematic switch.
- Ensure the switches are properly seated.
- If using custom switches, ensure they have been calibrated using the Akko software.
- Backlight not working or incorrect colors:
- Check Fn key combinations for backlight control.
- Ensure the keyboard software is up-to-date and settings are correctly configured.
- Bluetooth/2.4G connection drops frequently:
- Ensure the keyboard is within range of your device/receiver.
- Minimize interference from other wireless devices.
- Ensure the keyboard battery is sufficiently charged.
- Try re-pairing the device.
User Tips
- Software Customization: Utilize the Akko software to fine-tune actuation points for the magnetic switches, create custom macros, and personalize RGB lighting effects for an enhanced gaming and typing experience.
- Switch Experimentation: Take advantage of the hot-swappable design to try different magnetic switches. Remember to calibrate them via the software after installation.
- Battery Management: For optimal battery life, consider turning off RGB lighting when not needed, especially during wireless use. Regularly check the battery level using Fn + Space.
Warranty and Support
Akko provides a one-year warranty for customers in mainland China. For customers in other regions, please contact your specific seller or Akko distributor for details on their warranty policy.
Disassembling the keyboard without manufacturer/seller instructions will void the warranty.
For further assistance, you may refer to the official user manual PDF: Akko RAY68 HE User Manual (PDF)
Contact Information
Shenzhen Yinchen Technology Co., Ltd
- Website: www.akkogear.com
- Phone: 0769-22114578
- Address: Tower B, 35th Floor, Evergrande, Jiannan Road, Nanshan District, Shenzhen, China
Frequently Asked Questions (FAQ)
- Q: How do I switch between wired, 2.4G, and Bluetooth modes?
- A: Use the mode switch located under the Caps Lock key. Slide it to the desired mode (USB for wired, 2.4G for wireless, BT for Bluetooth).
- Q: Can I use my own switches with this keyboard?
- A: Yes, the Akko RAY68 HE features hot-swappable magnetic switches. However, after installing new switches, you must calibrate them using the Akko software for proper functionality.
- Q: How do I customize the RGB lighting?
- A: You can use the Fn + \ combination to cycle through preset colors and RGB modes. For more advanced customization and effects, download and use the Akko software.
- Q: What is Rapid Trigger and how does it work?
- A: Rapid Trigger allows for dynamic actuation and deactuation points, meaning a key registers as soon as it moves a tiny distance (0.005mm) and deactivates as soon as it moves back up. This provides extremely fast response times, especially beneficial in competitive gaming. You can configure Rapid Trigger settings via the Akko software.