Ezonetronics Wireless CarPlay Android Auto Retrofit Module for Tesla Model 3 Model Y

Contents

Ezonetronics Wireless CarPlay Android Auto Retrofit Module User Manual

For Tesla Model 3 & Model Y (2019-2024)

1. Product Overview

The Ezonetronics Wireless CarPlay Android Auto Retrofit Module enhances your Tesla Model 3 or Model Y (2019-2024) infotainment system by integrating wireless Apple CarPlay and Android Auto functionalities. This module allows seamless access to navigation, music, calls, and voice assistants directly on your Tesla's screen, providing a safer and more connected driving experience.

Ezonetronics Wireless CarPlay Android Auto Module in Tesla

Figure 1: Ezonetronics module displaying CarPlay and Android Auto interfaces on a Tesla screen.

2. Compatibility

This module is designed for specific Tesla models and years:

Compatibility table for Tesla Model 3 and Model Y

Figure 2: Compatibility details for Tesla Model 3 and Model Y.

  • Car Models: Tesla Model 3 (Intel/AMD systems), Tesla Model Y (Intel/AMD systems)
  • Years: 2019-2024
  • System Version: Compatible with Tesla systems after version 3.5 and 4.0.

3. Specifications

FeatureDescription
Brand NameEzonetronics
OriginMainland China
Supported FunctionsWireless Apple CarPlay, Wireless Huawei HiCar, Wireless Baidu CarLife, Front/Rear view video input, Rear view dynamic trajectory.
Voice ControlSupports Siri and Google Assistant.
NavigationOnline navigation via CarPlay/Android Auto apps.
Mirror-LinkSupports iOS and Android phone screen mirroring.
Package Dimensions (L x W x H)23 cm x 18 cm x 12 cm
Package Weight0.978 kg

4. Setup and Installation

This section details the installation and initial setup of your Ezonetronics module. Please follow the instructions carefully.

4.1. General Connection Overview

The module integrates with your Tesla's existing system. Physical installation typically involves connecting the module to the car's wiring harness and display. For detailed wiring diagrams, please refer to the provided PDF manual: User Manual (PDF).

4.2. Apple CarPlay / Huawei HiCar Connection

  1. Using the shortcut keys or remote control, switch the car's display to the add-on interface provided by the module.
  2. Navigate to and open the Bluetooth interface within the add-on system.
  3. On your Apple or Huawei smartphone, ensure both Wi-Fi and Bluetooth are turned ON.
  4. On your phone's Bluetooth settings, search for and select the device named "CAR Audio XXXX" (the exact name will be displayed on the car's screen).
  5. Once paired, your phone will prompt you to allow usage of CarPlay or HiCar. Accept this request.
  6. The car's screen should automatically switch to the CarPlay or HiCar interface.

Troubleshooting CarPlay Connection for Overseas Users:

  • Verify if your phone's Wi-Fi operates on 5GHz or 2.4GHz. The CarPlay core board defaults to 5GHz Wi-Fi.
  • If your phone uses 2.4GHz Wi-Fi, you may need to adjust the module's settings: Go to Factory Mode > Interconnection Settings > Hotspot Frequency Band and select channel 1, 6, or 11, depending on your local region's Wi-Fi regulations.

4.3. Baidu CarLife Connection

  1. To enable CarLife on the module: Switch to the add-on interface. Go to Add-on System Settings > Factory Settings > Mobile Interconnection Settings > Android Phone Connection. Select Baidu CarLife, then confirm.
  2. Go back one level and initiate a System Restart. After the restart, the main interface should display the CarLife application.
  3. Open the Bluetooth interface of the add-on system.
  4. On your Baidu CarLife-enabled smartphone, turn on Bluetooth.
  5. On your phone's Bluetooth settings, search for and select the device named "CAR Audio XXXX".
  6. On the car's screen, enter the Baidu CarLife connection interface. You will see a prompt in the bottom-left corner to set up your phone's personal hotspot. Ensure your phone's personal hotspot name and password exactly match what is displayed on the car screen. Keep your phone's hotspot active.
  7. Open the Baidu CarLife application on your smartphone. The car's screen will then automatically enter the CarLife interface.

4.4. Audio Output Settings

Proper audio routing is crucial for sound from CarPlay/Android Auto.

4.4.1. Audio/Video Separation Mode (If your car has Bluetooth)

  1. Connect your phone to the Ezonetronics module for CarPlay/Android Auto.
  2. Then, pair your phone with your car's original Bluetooth system.
  3. On your car's infotainment system, select Bluetooth as the audio source.
  4. Audio from CarPlay/Android Auto will now play through your car's speakers.

4.4.2. AUX OUT Mode (If your car does NOT have Bluetooth, requires microphone connection)

  1. Connect the AUX OUT cable from the CAPP data cable (part of the module's wiring) into your car's original AUX input port.
  2. On your car's original infotainment screen, navigate to the audio source settings and select AUX mode.
  3. Within the Ezonetronics module's add-on interface settings: Go to Factory Settings > Mobile Interconnection Settings.
  4. Uncheck the option labeled "Disable phone link audio".
  5. Save the settings, then go back one level and perform a System Restart. (Settings will not take effect without a restart).

4.5. Front/Rear View Camera Installation Settings

If you are installing aftermarket front or rear cameras with the module:

4.5.1. Rear View Camera Setup

  1. Install and connect your aftermarket rear view camera to the system.
  2. On the Ezonetronics module: Go to System Settings > Factory Mode > Advanced Mode.
  3. Enter the password: 888888.
  4. Navigate to MCU setup and Uncheck option A0.
  5. Go back one level and perform a System Restart to enable the aftermarket rear view camera function.

4.5.2. Front View Camera Setup

  1. Install and connect your aftermarket front view camera to the system.
  2. On the Ezonetronics module: Go to System Settings > Factory Mode > Advanced Mode.
  3. Enter the password: 888888.
  4. Navigate to MCU setup and Check options A3 and A7.
  5. Go back one level and perform a System Restart to enable the aftermarket front view camera function.

4.5.3. Camera Connection Details

  • Rear Camera: Connect the AV plug of the rear camera to the yellow input socket on the CAPP data cable. The camera requires power from the positive terminal of the reverse light or the car's ACC power supply. For vehicles without a reverse protocol, connect the reverse detection line from the CAPP data cable.
  • Front Camera: Connect the AV plug of the front camera to the blue input socket on the CAPP data cable. The camera requires power from the car's ACC power supply.

4.5.4. Reverse Trajectory Settings

  • For Touchscreen Displays: When the reverse camera image is displayed, long-press on the screen to bring up the settings interface for reverse trajectories.
  • For Non-Touchscreen Displays: Go to Decoding Settings > Display Reverse Trajectory Settings and select "Yes". After configuring, remember to change this setting back to "No" to prevent the settings interface from appearing every time you engage reverse.

5. Operating Instructions

Once the module is installed and connected, you can begin using its features.

5.1. Wireless Android Auto

Connect your Android phone wirelessly to access navigation, music, messages, and voice commands directly on your Tesla screen. Plug in once for initial setup, then enjoy both wired and wireless connectivity.

Wireless Android Auto display on Tesla screen

Figure 3: Wireless Android Auto interface showing navigation and music playback.

5.2. Intelligent Voice Control

Utilize voice commands for safer driving without taking your hands off the wheel. The module supports both Apple's Siri and Google Assistant for sensitive and extensive voice recognition.

Intelligent Voice Control with Siri and Google Assistant

Figure 4: Demonstrating voice commands for Siri and Google Assistant.

5.3. Online Navigation

Use your preferred navigation applications (e.g., Google Maps, Apple Maps, Waze) through CarPlay or Android Auto to get directions and enjoy your journey.

Online Navigation display on Tesla screen

Figure 5: Online navigation displayed on the Tesla infotainment screen.

The Mirror-Link feature allows you to directly project your smartphone screen (both iOS and Android) onto the Tesla display, enabling you to watch online videos or view other content.

Mirror-Link showing phone screen projected to Tesla display

Figure 6: Smartphone screen mirrored onto the Tesla display.

6. Maintenance

To ensure the longevity and optimal performance of your Ezonetronics module, follow these general maintenance guidelines:

  • Keep Dry: Avoid exposing the module to moisture or liquids.
  • Clean Gently: Use a soft, dry cloth to clean the unit. Do not use harsh chemicals or abrasive cleaners.
  • Temperature: Avoid extreme temperatures. Do not leave the module in direct sunlight for extended periods or in very cold conditions.
  • Connections: Periodically check that all cables and connections are secure.

7. Troubleshooting

If you encounter issues with your Ezonetronics module, refer to the following troubleshooting steps:

7.1. Connection Issues (CarPlay/Android Auto)

  • No Connection: Ensure your phone's Wi-Fi and Bluetooth are on. Re-pair the device.
  • Overseas CarPlay Wi-Fi Band: If you are in an overseas region and CarPlay is not connecting, check your phone's Wi-Fi band (5GHz vs. 2.4GHz). Adjust the module's hotspot frequency band in Factory Mode > Interconnection Settings if your phone uses 2.4GHz (select channel 1, 6, or 11).
  • CarLife Hotspot: For Baidu CarLife, ensure your phone's personal hotspot name and password exactly match what is displayed on the car screen.

7.2. Audio Issues

  • No Sound:
    • If your car has Bluetooth: Ensure your phone is paired to both the module and the car's original Bluetooth, and the car's audio source is set to Bluetooth.
    • If your car uses AUX: Ensure the AUX OUT cable is connected, and the car's audio source is set to AUX. Also, verify that "Disable phone link audio" is unchecked in the module's settings (Factory Settings > Mobile Interconnection Settings) and the system has been restarted.

7.3. Display Issues

  • Screen has no blue color: This indicates a color inversion issue.
    1. Go to Settings > Factory Mode > Advanced Mode.
    2. Enter password: 888888.
    3. Navigate to Decoding Settings > Red/Blue Inversion and set it to "Yes".
    4. Go back one level and perform a System Restart.
  • Screen shows garbled display (flower screen): This might be an LVDS mode mismatch.
    1. Go to Settings > Factory Mode > Advanced Mode.
    2. Enter password: 888888.
    3. Navigate to Decoding Settings > LVDS Mode and try switching between "NS" and "JEIDA" options.
    4. Go back one level and perform a System Restart after each change to test.
  • No Display: Check all power and video cable connections to ensure they are secure.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the Ezonetronics customer support team. Keep your purchase receipt or order details handy when contacting support.

You can also refer to the full PDF user manual for more detailed diagrams and instructions: User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.