1. Product Overview
The LiitoKala Lii-100 series is a versatile single-slot smart charger designed to automatically identify 3.7V lithium-ion (Li-ion) and 1.2V nickel-metal hydride/nickel-cadmium (Ni-MH/Ni-Cd) batteries. It features adjustable charging current for Li-ion cells, a USB reverse output function (power bank), and a four-segment LED display for battery level indication.

Figure 1: LiitoKala Lii-100, Lii-100B, and Lii-100C models
Video 1: Charger operation demonstration (Lii-S2 model shown, similar functionality)
2. Setup
- Power Connection: Connect a 5V/2A USB power adapter (not included) to the charger's Micro-USB input port using a Micro-USB cable. The charger's LEDs will briefly illuminate upon connection.
- Battery Insertion: Insert a compatible rechargeable battery into the charging slot. Ensure the positive (+) and negative (-) poles of the battery align correctly with the markings on the charger. The charger will automatically detect the battery type (Li-ion or Ni-MH/Ni-Cd).
- Current Selection (for Li-ion batteries only): For Li-ion batteries, you can adjust the charging current. Long-press the multi-function button for 2 seconds to cycle between 1000mA and 2000mA. The selected current will be indicated by the LEDs. Ni-MH/Ni-Cd batteries are charged at a fixed 500mA and do not require current selection.
- Initiate Charging: Charging will automatically begin approximately 5 seconds after battery insertion and current selection (if applicable). The corresponding battery level LEDs will flash to indicate the charging progress.

Figure 2: LiitoKala Lii-100C charger and packaging
3. Operating Instructions
3.1 Charging Process
- LED Indicators: The four-segment LEDs (25%, 50%, 75%, 100%) display the battery's charge status. During charging, the LEDs will flash sequentially according to the current charge level.
- Full Charge: Once the battery is fully charged, the 100% LED will remain constantly lit, and the charger will automatically stop the charging process.
3.2 USB Output (Power Bank Function)
- The charger can function as a power bank, providing a 5V/1A USB output to charge external devices like mobile phones.
- Compatibility: This function is only available when a Li-ion battery is inserted in the charging slot. If a Ni-MH/Ni-Cd battery is inserted, the USB output will be automatically disabled.
- Activation: Connect your device to the USB-A output port on the charger. The charger will automatically begin supplying power.

Figure 3: Power display and current selection (1.0A/2.0A)

Figure 4: Power bank function in use

Figure 5: Micro USB charging via laptop
4. Maintenance
- General Care: Keep the charger away from water, high temperatures, and flammable materials.
- Operating Temperature: Ensure the charger is used within an ambient temperature range of 0°C to 50°C.
- Cleaning: To clean the charger, use a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the charger in a cool, dry place away from direct sunlight.
5. Troubleshooting
- No Charging / No Display:
- Check the Micro-USB power supply and ensure it is properly connected.
- Verify that the USB power adapter is functioning correctly and provides 5V/2A.
- Ensure the battery is inserted with the correct polarity.
- Display Error: If the charger displays an error or behaves abnormally:
- The battery might be reversed, damaged, or incompatible. Remove the battery and try a different one.
- Slow Charging:
- Ensure you are using a 5V/2A USB power adapter. Lower power adapters may result in slow charging.
- For Li-ion batteries, ensure the charging current is set to 2000mA for faster charging (if desired).
- USB Output Not Working:
- The USB output (power bank function) only works with Li-ion batteries. If a Ni-MH/Ni-Cd battery is inserted, the USB output is disabled.
- Abnormal Operation: In case of any abnormality, immediately disconnect the power supply and check the battery polarity and compatibility.

Figure 6: Multiple protection schemes for safe charging
6. Specifications
| Parameter | Value |
|---|---|
| Input Power | Micro-USB DC 5V/2A |
| Li-ion Output Voltage | 4.2V ±1% |
| Li-ion Output Current | 1000mA / 2000mA (adjustable) |
| Ni-MH/Ni-Cd Output Voltage | 1.48V |
| Ni-MH/Ni-Cd Output Current | 500mA (fixed) |
| USB Output (Power Bank) | 5V/1A |
| Compatible Batteries | Li-ion/IMR: 18650, 21700, 26650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440; Ni-MH/Ni-Cd: AA, AAA |
| Size (L×W×H) | 111mm × 38mm × 32mm |
| Weight | 45g |
| Protection Features | Overcharge, Short Circuit, Reverse Polarity, Overheat |
| Certifications | CE, FCC, RoHS |

Figure 7: Compatible battery types
7. User Tips
- Power Adapter Quality: For optimal performance and faster charging, always use a high-quality 5V/2A USB power adapter. Using lower-power adapters may result in slower charging or inability to reach fast charge speeds.
- Micro-USB Port: While functional, the charger uses a Micro-USB port. Consider using a dedicated Micro-USB cable for best connection, as USB-C adapters might not always provide stable power.
- Battery Health Check: If a battery is not charging or shows an error, try it in another known-good charger if available, to determine if the issue is with the battery or the charger.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims.
A detailed user manual (PDF) for the Lii-100C model is available for download from the manufacturer's official website or can be accessed via this link: LiitoKala Lii-100C User Manual (PDF).