1. Introduction
Thank you for choosing this electric vehicle mid-drive motor square taper crank arm set. This product is specifically designed for square taper (square taper hole) mid-drive motors and serves as a core drive component of the electric bicycle power transmission system.
The crank arms are made of high-strength aluminum alloy, precision-forged or CNC-machined, significantly reducing weight while maintaining strength. The anodized surface treatment provides wear resistance, corrosion protection, and an attractive finish. The set includes one left and one right crank arm, available in four lengths: 140mm, 152mm, 165mm, and 170mm, to suit different riding needs and body proportions.
Core Features:
- High-Strength Material: Aluminum alloy forged/CNC-machined for high strength and light weight.
- Square Taper Design: Standard square taper hole compatible with mainstream mid-drive motors.
- Multiple Sizes: 140/152/165/170mm available for different riding needs.
- Anodized Finish: Wear and corrosion-resistant for lasting color.
- Left & Right Matched: Sold as a complete set for guaranteed consistency.
- Lightweight: Significantly lighter than original steel crank arms.
2. Technical Specifications
General Parameters:
| Parameter | Specification |
|---|---|
| Core Functions | Power transmission, pedal drive |
| Main Material | Aluminum Alloy |
| Surface Finish | Anodized (Black) |
| Size Options (Center-to-Center Distance) | 140mm, 152mm, 165mm, 170mm |
| Safety Certifications | CE, RoHS |
| Compatible Motors | BAFANG BBS series, TONGSHENG TSDZ2/8, and other square taper mid-drive motors |
| Interface Type | Square Taper (Square taper hole, standard size) |
| Pedal Thread Size | 9/16" (Standard bicycle pedal thread) |
| Pedal Thread Direction | Left crank: Left-hand thread (tighten counter-clockwise) Right crank: Right-hand thread (tighten clockwise) |
| Weight | Approx. 392g - 450g per pair (depending on size) |
| Operating Temperature | -20°C ~ +60°C |
| Package Contents | 1 Left Crank Arm, 1 Right Crank Arm |
Crank Arm Dimensions:


3. Setup & Installation
3.1 Safety Warning
Important: Disconnect battery power and ensure the motor is powered OFF before installation!
3.2 Required Tools
| Tool Name | Specification | Purpose |
|---|---|---|
| Hex Wrench | 8mm | Remove/install crank fixing bolt |
| Socket Wrench | 14mm/15mm | Install pedals (depending on pedal specification) |
| Torque Wrench | Recommended | Ensure accurate bolt torque |
| Grease | Lithium-based | Lubricate threads for anti-seize |
| Crank Puller | Square taper type | Remove original crank (if needed) |
3.3 Pre-Installation Checks
- Verify Motor Shaft Type: Check that the motor shaft is a square taper type.
- Confirm Crank Length: Select the appropriate length based on your riding needs.
- Check Thread Direction: Verify the pedal thread direction for left and right cranks.
- Clean Mounting Surfaces: Wipe the motor shaft and crank square taper hole to ensure they are free of oil and debris.
3.4 Removing the Original Crank (if applicable)
- Use an 8mm hex wrench to loosen the crank fixing bolt counter-clockwise. Keep the bolt and washer safe.
- Remove the dust cover (if present).
- Use a square taper crank puller to remove the crank from the motor shaft. Ensure the puller tool is correctly installed.
- Clean the motor shaft surface to remove oil and debris.
3.5 Installing the New Crank Arms
- Apply a small amount of grease to the motor shaft and the crank square taper hole. This prevents corrosion and eases future removal.
- Align the crank arm with the motor shaft and push it into place. Ensure the square taper hole fully engages with the shaft.
- Install the crank fixing bolt and hand-tighten. Confirm smooth threading.
- Use a torque wrench to tighten the bolt to the recommended torque: 35-40 N·m.
- Repeat steps 2-4 to install the other side crank arm. Left and right crank arms are NOT interchangeable.
3.6 Installing Pedals
- Apply a small amount of grease to the pedal threads. This prevents corrosion.
- Confirm pedal markings (L for left / R for right). Left and right pedals are NOT interchangeable.
- Hand-thread the pedal into the crank arm pedal hole. Ensure threads are aligned correctly.
- Tighten the pedal using a wrench. Recommended Torque: 30-35 N·m.
3.7 Installation Diagram & Video


4. Operating & Riding Experience
4.1 Crank Arm Length Selection Guide
| Length | Recommended Height | Riding Scenario | Description |
|---|---|---|---|
| 140mm | 150-160cm | City commuting, children/youth bikes | Short crank, suitable for shorter riders |
| 152mm | 160-170cm | City commuting, casual riding | Shorter crank, light pedaling feel |
| 165mm | 170-180cm | All-around riding | Standard length, fits most riders |
| 170mm | 180cm+ | Off-road, long-distance, racing | Long crank, greater torque output |
4.2 Size Selection Recommendations
- City Commuting: Recommended 152mm or 165mm
- Mountain Off-Road: Recommended 165mm or 170mm
- Long-Distance Riding: Recommended 165mm
- Racing: Recommended 165mm or 170mm
- Women / Shorter Riders: Recommended 140mm or 152mm
4.3 Post-Installation Checks & Test Ride
- Check Item: Bolt Tightness - Check crank fixing bolt. Should be tightened to specified torque.
- Check Item: Rotation Test - Spin the cranks. Should have smooth rotation, no binding.
- Check Item: Pedal Installation - Check if pedals are tight. Should have no looseness.
- Check Item: Motor Test - Power on and test. Motor should run normally, no abnormal noise.
- Perform a low-speed test ride in a safe area.
- Check for any abnormal noise while pedaling.
- After riding 5-10 minutes, re-check crank fixing bolt torque.
5. Maintenance
5.1 Regular Maintenance
| Maintenance Item | Frequency | Description |
|---|---|---|
| Bolt Tightness Check | Monthly | Check crank fixing bolt torque. |
| Cleaning | Monthly | Wipe crank surfaces with a damp cloth. |
| Pedal Check | Monthly | Check for pedal looseness. |
| Rust Prevention | Quarterly | Check bolts for rust. |
5.2 Cleaning Method
- Surface Cleaning: Wipe crank surfaces with a damp cloth to remove dirt and mud.
- Thread Cleaning: Clean debris from threads when disassembled.
- Lubrication: Apply a small amount of grease to threads during reinstallation.
5.3 Precautions
- Avoid directing high-pressure water at the crank bearing area.
- Regularly check crank fixing bolts for looseness.
- Replace immediately if the crank arm is deformed or cracked.
6. Troubleshooting
| Symptom | Possible Cause | Troubleshooting Steps |
|---|---|---|
| Crank Loose | 1. Fixing bolt not tightened. 2. Square taper hole worn. 3. Motor shaft worn. | 1. Re-tighten to recommended torque. 2. Inspect crank square taper hole. 3. Inspect motor shaft condition. |
| Abnormal Noise While Riding | 1. Bolt loose. 2. Pedal loose. 3. Crank interfering with frame. | 1. Check and tighten all bolts. 2. Re-tighten pedals. 3. Check crank to frame clearance. |
| Pedal Wobble | 1. Pedal not tight. 2. Pedal threads damaged. | 1. Re-tighten pedals. 2. Inspect threads; replace if necessary. |
| Crank Difficult to Install | 1. Debris in square taper hole. 2. Burr on motor shaft. | 1. Clean square taper hole. 2. Inspect and clean motor shaft. |
| Pedal Thread Direction Error | Left and right pedals installed on wrong sides. | Verify L/R markings and reinstall. |
7. User Tips
- Offset Design: The offset design of these crank arms helps prevent chainstay rub, providing a smoother pedal stroke.
- Versatile Application: These crank arms are suitable for various uses, including electric bicycles and even kayak pedal systems.
- Package Contents: Always double-check the package contents upon arrival to ensure you have received both left and right crank arms as ordered.
8. Safety Warnings & Support
8.1 Important Safety Instructions:
- Professional Installation: Installation is recommended to be performed by a mechanic with bicycle repair experience.
- Torque Control: Strictly follow the specified torque values. Over-tightening may damage threads; under-tightening may cause loosening.
- Regular Inspection: Check crank fixing bolts for tightness before each ride.
- Correct Pedal Installation: Ensure left and right pedals are installed on the correct side (L left / R right). Reversing will damage threads.
- Ride Safety: After initial installation, always perform a test ride in a safe area.
- No Modifications: Do not drill, grind, or otherwise modify the crank arms.
- Timely Replacement: Replace immediately if the crank arm is deformed, cracked, or the square taper hole is worn.
8.2 Disclaimer
This product is a specialized crank arm set for electric vehicle mid-drive motors. The user is responsible for ensuring installation is performed by a qualified technician or a professional bike shop. The manufacturer assumes no liability for damage or safety incidents resulting from user modification, improper installation, overload, or installation not following these instructions.
8.3 Contact & After-Sales Support
Manufacturer / Support Information:
- Email: service@powallon-e.com
- Official Website: www.powallon-e.com