EzoneTronics RM-BSJ3945F (for Porsche PCM 3.0)

Contents

Ezonetronics Wireless CarPlay Android Auto Retrofit Kit User Manual

Model: RM-BSJ3945F

Brand: EzoneTronics

Introduction

Preface

Thank you for choosing this Intelligent Car Information System. Our product adds CarPlay and Android Auto to vehicles lacking these features, letting you use them for music, navigation, and more—all via your car's original screen. A seamless upgrade, it bridges your smartphone and in-car display, bringing familiar interfaces without altering your vehicle's factory setup. Easy to integrate, it enhances connectivity safely, turning your existing infotainment system into a smart, intuitive hub. Modernize your drive affordably, leveraging what your car already has.

Safety Precautions

  • Install only by qualified professionals to avoid damaging vehicle electrical systems.
  • Disconnect car battery before installation to prevent short circuits.
  • Ensure all connections are secure and insulated to avoid fire hazards.
  • Do not block airbags, driver visibility, or vehicle controls during installation.
  • Avoid modifying essential vehicle safety systems or wiring.
  • Operate connected devices only when parked; never distract from driving.
  • Regularly check for loose connections or overheating during use.
  • Stop using immediately if unusual smells, sounds, or malfunctions occur.
  • Ensure product usage complies with local traffic laws and regulations.
  • Keep product away from water, extreme temperatures, and direct sunlight when not in use.

Features

Function Introduction

  • Apple CarPlay: CarPlay lets iPhone users connect to car systems, mirroring key apps. Access navigation, music, calls, and messages via the car's screen or voice commands. It enables hands-free operation, syncing contacts and playlists, enhancing driving safety and convenience seamlessly.
  • Android Auto: Android Auto connects Android phones to car displays, bringing essential apps safely. Access navigation, music, calls, and messages via voice or touch. It prioritizes driving-focused features, enabling hands-free use to keep focus on the road, enhancing convenience and safety.
  • Front/Rear/360 Input: The intelligent module supports video decoding and can be equipped with frontview, rear view (with intelligent dynamic trajectory display and radar support), as well as a 360° panoramic view.
CarPlay interface displayed on a Porsche PCM 3.0 screen

Image: CarPlay interface displayed on a Porsche PCM 3.0 screen.

Diagram showing how to switch between OEM car system and CarPlay/Android Auto by long-pressing the NAVI button

Image: Switching between OEM car system and CarPlay/Android Auto by long-pressing the NAVI button.

Illustrations of retaining original car functions: steering wheel buttons, central control panel, and touch screen for control

Image: Retaining original car functions: steering wheel buttons, central control panel, and touch screen for control.

Display of an optional aftermarket rear view camera on the car screen

Image: Optional aftermarket rear view camera display on the car screen.

Car screen showing AUX input selection for sound output

Image: Car screen showing AUX input selection for sound output.

Screenshots demonstrating intelligent voice control with Siri and Google Assistant

Image: Intelligent voice control with Siri and Google Assistant.

Wireless Android Auto interface on car screen and a smartphone showing Android Auto

Image: Wireless Android Auto interface on car screen and a smartphone.

Online navigation map displayed on the car screen

Image: Online navigation map displayed on the car screen.

Compatibility

Applicable System and Car Models (Porsche PCM 3.0)

Car Model Years Screen Size
911 2006-2012 7"
Cayenne 2007-2009
Cayman 2009-2012
Panamera 2009-2010
Boxster 2009-2012

Please contact support if you are unsure about your car system compatibility.

Diagram illustrating how to identify different Porsche PCM versions (3.0, 3.1, CDR 3.1, 4.0) based on button layout

Image: Diagram for identifying Porsche PCM versions (3.0, 3.1, CDR 3.1, 4.0).

Installation

Package Contents

  • 1 x PCM 3.0 CarPlay box
  • 1 x Power Harness
  • 1 x Adapter Board
  • 1 x Screen Signal Cable
  • 1 x USB Cable
  • 1 x User Manual
Image showing the decoder box with dimensions (124mm x 80mm x 27mm) and included cables: Adapter Cable, Power Cable, Screen Signal Cable, RCA/USB Cable

Image: Package contents including the decoder box and various cables.

Wiring Diagram

Wiring diagram for connecting the CarPlay decoder box to the factory screen FPC, power harness, and AUX input

Image: Installation wiring diagram showing connections for the decoder box, factory screen FPC, power harness, and AUX.

Setup

DIP Settings & Switch

Refer to the table below for DIP switch settings based on your car model and screen size. Ensure the dial is set to "ON" for the selected options.

Car Model Year Screen Size DIP
911 2006-2012 7" 234567 ON
Cayenne 2007-2009 7" 148 ON
Cayman 2009-2012 7" 148 ON
Panamera 2009-2010 7" 148 ON
Boxster 2009-2012 7" 148 ON

Note: Please note that the dial is down to "ON". Since screen configuration cannot be obtained directly from the original system, we have provided all DIP options. Please try them one by one in order. After switching the DIP, be sure to restart the decoder for the changes to take effect.

Wireless Connection

5.1 Wireless CarPlay Connection Steps

  1. Turn on your phone's Bluetooth and Wi-Fi, and keep it on.
  2. Select the Bluetooth Device name as "CAR Audio_XXXX" and pair.
  3. Confirm the pairing request on your phone.
  4. After successful Bluetooth pairing, follow the on-screen prompts to complete the CarPlay connection.
Multiple phone screenshots showing the steps to connect Wireless CarPlay via Bluetooth pairing

Image: Screenshots detailing the Wireless CarPlay connection process on a smartphone.

5.2 Wireless Android Auto Connection Steps

To connect Wireless Android Auto, ensure your phone's Bluetooth is on. The system will prompt you to connect via Bluetooth or insert a USB cable if a wireless connection isn't established.

Car screen displaying a prompt to connect Android Auto via Bluetooth or USB cable

Image: Car screen prompt for Wireless Android Auto connection.

Operation

Button Control

Button Operation Function
NAVI Long press Switch OEM screen to interface screen OR interface screen to the OEM screen
Warning Light (Triangle) Double Click Switch OEM screen to interface screen OR interface screen to the OEM screen
Screen Touch screen Control function
Rotary Knob Swipe Increase/Decrease the volume
Image showing the car's central control panel with buttons and rotary knob, indicating their functions

Image: Car's central control panel with button and knob functions.

External Settings

6.1 Rear View Camera Input

This CarPlay interface supports camera input for clear rear view imagery. After connecting the camera, ensure proper wiring as shown in the diagram.

Wiring diagram for rear view camera input to the CarPlay module

Image: Wiring diagram for rear view camera input.

6.2 Radar and Trajectory Settings

If your aftermarket camera supports reversing trajectory lines, uncheck the A1 box in the MCU Setup to display them. For aftermarket radar options, uncheck the A2 box to enable it. If you want to connect a front camera, choose the "A3" option.

  1. Enter system settings: Click "Factory mode" > "Advanced mode" > Enter password "888888" > "MCU Setup" > Uncheck "A0" option.
  2. Return to the previous level and click "Restart system" to successfully enable the reversing rear view function.
Screenshot of the MCU Setup screen showing options for radar and trajectory settings

Image: MCU Setup screen for radar and trajectory settings.

Specifications

Parameter Value
Operating voltage 9-16V, 14.4V (rated)
Storage temperature -30 ~ +85°C
Operating temperature -30 ~ +75°C
Ambient humidity <98% (at 45°C), 65±5% (rated)
Power consumption current 1A (rated), 3A (Max) Shutdown current: 300mA (Clock is on)
Quiescent current less than 3mA
Charging current ≤2A, when the USB charging current >1A, the host machine should activate the circuit protect function to control the current within 15A and avoid products burning.

Troubleshooting

8.1 Why does the Box's Bluetooth disconnect?

The working principle of wireless CarPlay involves confirming device information through Bluetooth pairing, after which a Wi-Fi connection is established to transmit data. To avoid interference, the Bluetooth connection will be disconnected. This is a normal phenomenon.

8.2 I cannot connect CarPlay, but Bluetooth is already paired.

Please forget the device's Bluetooth connection and reset Wi-Fi in your iPhone settings (Settings > General > Transfer or Reset [Device] > Reset > Reset Network Settings).

8.3 Why is the wireless CarPlay connection not stable?

  1. Ensure that the mounted position of the CarPlay box is not blocked by metal components, as this may impair Wi-Fi signal transmission.
  2. Switch the Wi-Fi channel. Enter the CarPlay box settings: Click Factory Mode > Connectivity Settings > Hotspot Band > Select 1, 6, or 11, depending on the current region.

User Tips

Specific user tips based on buyer reviews or Q&A content are not available in the provided data. Always ensure your car's firmware is up to date for optimal performance.

Warranty & Support

For any technical issues or support, please contact:

A detailed user manual in PDF format is also available for download: User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.