1. Introduction
Thank you for choosing the HORACO 16 Port Gigabit Network Switch. This unmanaged switch is designed to expand your network capacity with high-speed Gigabit Ethernet connections, making it ideal for home, small office, or homelab environments. Its plug-and-play design requires no configuration, ensuring a simple and efficient setup.
2. Safety Information
Please read and follow these safety guidelines to prevent damage to the device and ensure safe operation:
- Ensure the power supply voltage matches the device's requirements (AC 100-240V, 50/60Hz, DC 12V 1A).
- Do not expose the device to water or excessive humidity.
- Avoid placing the device in direct sunlight or near heat sources.
- Ensure adequate ventilation to prevent overheating. The device features dual-sided ventilation holes for enhanced heat dissipation.
- Do not attempt to open or repair the device yourself. Refer all servicing to qualified personnel.
- The device is equipped with port lightning protection. However, avoid using it during severe thunderstorms if possible.
3. Package Contents
Verify that all items are present in your package:
- 1 x HORACO 16 Port Gigabit Ethernet Switch
- 1 x AC Power Adapter
- 1 x User Manual (this document)
- 1 x Certificate of Conformity
- Several Footpads
Table summarizing Voltage Supply, Working Environment, Physical Structure, and Packing List.
4. Product Overview
The HORACO 16 Port Gigabit Network Switch is designed for high-speed and stable network performance. It features a robust metal construction and fanless cooling for silent operation.
4.1 Key Features
- 16 x 10/100/1000Mbps RJ45 Ports
- Plug and Play: No configuration required
- Fanless Cooling for silent operation
- Port Lightning Protection Design
- Gigabit Speed Transmission (up to 1000Mbps)
- High and Low Temperature Resistance (0-40°C operating, -40-70°C storage)
- High-Speed Data Processing with EN8850DHE Chip
- Supports Auto MDI/MDIX and Auto Speed Negotiation
- Desktop or Wall-Mounted Installation
Overview of the 16-Port Gigabit Ethernet Switch with icons representing key features.
4.2 Physical Layout and Dimensions
The switch has a compact design suitable for various environments.
Detailed diagram of the switch's front (ports) and rear (power input, PWR LED), labeled as "Port Specifications".
Product structure diagram showing top, side, and front dimensions (240mm x 102mm x 30mm).
5. Specifications
| Feature | Specification |
|---|---|
| Brand Name | HORACO |
| Model Number | ZX-SWG00160 |
| Switch Type | Gigabit Switch (Unmanaged) |
| Interface | 16*1Gbps RJ45 ports |
| Transmission Rate | 10/100/1000Mbps |
| Switch Capacity | 32Gbps |
| Packet Forwarding Rate | 23.8Mpps |
| Packet Buffer | 4.1Mbit |
| MAC Address Table | 8K |
| Communication Mode | Full-Duplex & Half-Duplex |
| Forwarding Mode | Store and Forward |
| Network Protocols | IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3ab, IEEE802.3az (Energy Efficient Ethernet) |
| VLAN Support | No |
| Power Consumption | ≤12W (Mainboard Power Consumption: 6.78W) |
| Power Supply | AC 100-240V, 50/60Hz, DC 12V 1A |
| Fan Quantity | 0 (Fanless) |
| Installation Method | Desktop, Wall-mounted |
| Product Dimensions (L*W*H) | 240mm * 102mm * 30mm |
| Product Net Weight | 0.59Kg |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10%-90%, non-condensing |
| Storage Humidity | 5%-95%, non-condensing |
| Surge Protection | Port Surge: Common mode 4KV, Differential mode 2KV (Class C) |
| Electrostatic ESD | Air 8KV, contact 6KV (Class C) |
| Certifications | CE, FCC, RoHS |
Image illustrating the "Metal Construction Withstands High Temperatures," showing resistance to hot weather (40°C) and cold weather (0°C).
6. Setup Instructions
The HORACO 16 Port Gigabit Network Switch is designed for easy plug-and-play installation.
6.1 Desktop Installation
- Place the switch on a stable, flat surface.
- Attach the included footpads to the bottom of the switch to prevent slipping and protect surfaces.
6.2 Wall-Mounted Installation
This product can be wall-mounted using the dedicated holes on the back for flexible and convenient placement.
- Choose a suitable location on a wall, ensuring it is within reach of power and network cables.
- Mark the positions for drilling using the wall-mounting holes on the back of the switch as a template.
- Drill holes and insert appropriate wall anchors (not included, depending on wall material).
- Securely mount the switch to the wall using screws (not included).
Image of the switch mounted vertically on a wall next to a desk, illustrating wall-mounted installation.
Image showing the wall-mounted installation, highlighting the wall-mounting holes on the back for flexible and convenient setup.
6.3 Connecting the Switch
- Connect the included AC power adapter to the switch's DC 12V 1A power input port and then plug it into a power outlet. The PWR LED will illuminate green when powered on.
- Connect your network devices (computers, servers, network printers, etc.) to any of the 16 RJ45 ports using standard Ethernet cables. The switch supports MDI/MDIX auto-sensing, so you don't need to worry about cable types (straight-through or crossover).
- The ports also feature auto-negotiation for 10/100/1000Mbps speeds.
Image demonstrating the "Plug and Play" feature, with an Ethernet cable connecting to a port, highlighting Auto MDI/MDIX and Auto Speed Negotiation.
Image detailing the "Plug and Play No Configuration Required" feature, including MDI/MDIX auto-sensing and 10/100/1000Mbps auto-negotiation.
7. Operating the Switch
The HORACO 16 Port Gigabit Network Switch is an unmanaged device, meaning it operates automatically without requiring any user configuration. Once connected, it will immediately begin forwarding network traffic.
7.1 LED Indicators
The LEDs on the switch provide visual feedback on its status:
- PWR (Power) LED (Green):
- On: The switch is powered on.
- Off: The switch is powered off.
- Ports 1-16 LEDs (Green):
- On: A network link is established and normal.
- Off: No network link is established or the link is blocked.
- Flashing: Data is being transmitted or received through the port.
Diagram illustrating Gigabit speed transmission at 1000Mbps, with data flowing from the switch to various devices.
Image emphasizing "Gigabit High-Speed Transmission" with 16 Gigabit Ethernet ports supporting up to 1000Mbps.
8. Maintenance
The HORACO 16 Port Gigabit Network Switch is designed for low maintenance due to its fanless operation and robust metal casing.
- Cleaning: Use a soft, dry cloth to clean the exterior of the switch. Do not use liquid or aerosol cleaners.
- Ventilation: Ensure that the ventilation holes on the sides of the switch are not obstructed to maintain optimal cooling.
- Environment: Operate the switch within the specified temperature and humidity ranges to ensure longevity and stable performance.
Close-up of the switch's side, showing ventilation holes for powerful cooling and stable performance.
Image showing the "Powerful Cooling Stable Performance" with dual-sided ventilation holes for enhanced heat dissipation.
9. Troubleshooting
9.1 No Power
- Ensure the power adapter is securely connected to the switch and a working power outlet.
- Verify that the power outlet is functional by plugging in another device.
- Check if the PWR LED on the switch is illuminated green. If not, try a different power adapter (if available and compatible).
9.2 No Link/Activity on a Port
- Ensure the Ethernet cable is securely connected to both the switch port and the network device.
- Check the status of the corresponding port LED. If it's off, there's no link.
- Try using a different Ethernet cable.
- Connect the device to a different port on the switch.
- Verify that the connected network device is powered on and functioning correctly.
- The switch supports Auto MDI/MDIX, so cable type should not be an issue, but ensure the cable is not damaged.
9.3 Slow Network Speed
- Ensure all connected devices and cables support Gigabit Ethernet (1000Mbps) for optimal performance.
- Check for excessive network traffic or bottlenecks on other devices.
- Verify that the port LEDs are flashing, indicating data transmission.
10. User Tips
- Users have reported super fast data transmission, making it excellent for demanding network tasks.
- The sturdy metal construction contributes to its good quality and durability.
- Its plug-and-play nature makes it very easy to set up, even for those less familiar with networking equipment.
11. Frequently Asked Questions (FAQ)
- Q: Is the switch casing metal, and can it be mounted?
- A: Yes, the switch features a durable metal construction and supports both desktop and wall-mounted installation.
- Q: Does this switch require any configuration?
- A: No, it is an unmanaged switch with plug-and-play functionality, requiring no software configuration.
- Q: Does it have Power over Ethernet (PoE) ports?
- A: No, this model does not support PoE.
12. Warranty and Support
For detailed warranty information and technical support, please refer to the official HORACO website or contact your retailer. A comprehensive user manual in PDF format is also available for download from the product page or by clicking here.
13. Regulatory Compliance
This device complies with the following standards:
- CE
- FCC
- RoHS
Diagram showing the switch with a lightning shield icon, indicating Port Lightning Protection Design.
Image reinforcing "Port Lightning Protection Design," mentioning built-in protection circuit for stable operation during thunderstorms.