ANYFAR CarPlay Android Auto Retrofit Kit for Audi A4 A5 Q5 MMI 2G

Contents

ANYFAR CarPlay & Android Auto Retrofit Kit User Manual

Model: CarPlay Android Auto Retrofit Kit for Audi A4 A5 Q5 MMI 2G

Brand: ANYFAR

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your ANYFAR OEM Screen Upgrade Decoder Box. This kit integrates Apple CarPlay and Android Auto functionalities into your Audi's existing MMI 2G system, enhancing your driving experience with modern connectivity while retaining your vehicle's original display and controls.

2. Key Features

  • Seamless Integration: Adds CarPlay and Android Auto to your factory screen.
  • Wired & Wireless Connectivity: Supports both wired and wireless Apple CarPlay and Android Auto.
  • Retains OEM Controls: Utilizes original steering wheel buttons and MMI rotary controller for navigation.
  • Voice Control: Compatible with Siri and Google Assistant for hands-free operation.
  • Navigation Support: Use your favorite navigation apps like Google Maps, Waze, and Apple Maps.
  • Multimedia Playback: Enjoy music, podcasts, and other media from your smartphone.
  • Camera Inputs: Supports aftermarket rear-view and front-view cameras (optional).
  • Screen Mirroring: Allows mirroring of your smartphone screen (iOS and Android).
  • USB Playback: Play audio and video media directly from a USB disk.
  • Plug & Play Installation: Designed for non-destructive installation without cutting wires.
  • Bluetooth 5.0 & Wi-Fi: Built-in 2.4G and 5.8G Wi-Fi for stable wireless connections.

3. Compatibility

This CarPlay & Android Auto Retrofit Kit is designed for specific Audi models equipped with the MMI 2G system and a 6.5-inch screen. Please verify your vehicle's model, year, and MMI system before installation.

Audi MMI 2G Compatibility Table

Image: Compatibility table showing Audi A4, A5 (2009-2016) and Q5 (2009-2017) with 6.5" screen for MMI 2G.

Car ModelYearsScreen InchMMI Version
Audi A42009-20166.5"MMI 2G
Audi A52009-20166.5"MMI 2G
Audi Q52009-20176.5"MMI 2G

Note:

  • This kit is specifically for MMI 2G systems. It is not compatible with MMI 3G or other MMI versions.
  • If you are unsure about your MMI version, please consult your vehicle's manual or contact your Audi dealer.

4. Package Contents

Please check the package contents upon receipt to ensure all items are present:

Package and Accessories

Image: Diagram showing the decoder box with dimensions and all included accessories.

  • CarPlay Decoder Box (Dimensions: 151mm x 100mm x 26mm)
  • Power Cable Harness
  • AUX Converter
  • Adapter Board
  • External Microphone
  • LVDS OUT & IN Cable
  • RCA & USB Cable
  • WiFi Antenna
  • Gateway Cable

5. Setup and Installation

Installation requires disassembling parts of your car's dashboard. If you are not comfortable with this process, it is recommended to seek professional installation.

5.1. Pre-installation Check

  • Confirm your Audi model, year, and MMI 2G system.
  • Ensure the car's battery is disconnected before starting the installation.

5.2. Toggle (DIP) Switch Setup

The decoder box has toggle (DIP) switches that need to be configured according to your car's screen size. These switches are typically located on the side or back of the decoder box.

Configuration for Screen Sizes:

  • For 6.5-inch screen (400x240 resolution): Set DIP switches 1, 2, 3, 4, 5, 6, 7, 8 to the 'OFF' position.
  • For 6.5/7-inch screen (800x480 resolution): Set DIP switches 1, 2, 3, 4, 5, 6, 7, 8 to the 'ON' position.

Note: Refer to the markings on the decoder box for exact switch numbering and ON/OFF positions.

5.3. Cable Connections

Carefully follow the wiring instructions. Incorrect connections can damage the unit or your vehicle's electronics.

5.3.1. Main Decoder Box Connections

  • CAN Power: Connect the main power harness to the decoder box.
  • USB Video Switch: Connect the USB cable for media playback and smartphone connection.
  • LVDS: Connect the LVDS IN and OUT cables. These transmit video signals between the car's display and the decoder box.
  • External Microphone: Plug the external microphone into its dedicated port for voice commands and calls.
  • AUX Converter: Connect the AUX converter as per your vehicle's audio input requirements.
  • RCA Cables: Use these for optional aftermarket camera inputs (rear-view, front-view).

5.3.2. Transfer Gateway Connection (Typical for A1/Q3, A6L, Q7)

This connection involves integrating the decoder box with your car's gateway module, often located near the driver or passenger seat. The power cable harness will typically include connections for MIC IN, MIC OUT, GND, 12V Reverse Camera, 12V ACC out, Back/Reverse Detect, and 12V input reverse Detect. These connect to the corresponding wires in your vehicle's harness and the decoder box. The original gateway cable connects to the new gateway cable, which then connects to the decoder box. New LVDS cables will run from the decoder box to the OEM CD host and the screen, replacing or intercepting the original LVDS cable.

5.3.3. Transfer CAN from Air Condition Panel (Typical for A8L/D4, A6L)

For some models, the CAN bus signals are integrated via the air condition panel. This involves connecting the decoder box's CAN wires to the vehicle's CAN lines found in the air condition panel's wiring. Similar to the gateway connection, power and video signals are routed through the decoder box, intercepting the original car's wiring for seamless integration.

5.3.4. WiFi Antenna and USB-AV Cable Connection

Connect the WiFi antenna to the designated port on the decoder box. Ensure it is positioned away from metal obstructions for optimal signal. Connect the USB-AV cable to the decoder box for USB media playback and potential video input.

5.4. Physical Installation Location

The CarPlay interface decoder box should be installed in an appropriate space near or on the OEM head unit. Common locations include behind the glove box, under the dashboard, or directly behind the main display unit, ensuring it does not interfere with other vehicle components.

Image: Examples of installation locations, showing the decoder box placed near the OEM head unit or beside it within the dashboard cavity.

6. Operating Instructions

6.1. Switching Between OEM and CarPlay/Android Auto Interface

After all cables are connected and the system is powered on, you can switch between your original MMI system and the CarPlay/Android Auto interface by long-pressing the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.