LEHX 7 inch 4K Car DVR

Contents

LEHX 7-inch 4K Car DVR User Manual

Model: 7 inch 4K Car DVR

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your LEHX 7-inch 4K Car DVR. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

LEHX 7-inch 4K Car DVR showing navigation and video recording
LEHX 7-inch 4K Car DVR with integrated display, front camera, and rear camera view.

Package Contents

Verify that all items are present in your package:

Diagram of LEHX Dash Cam package contents including main unit, mounts, and cables
The package includes the 7-inch 4K Front Camera unit, Soft Plastic Base, Suction Mount Bracket, Camera Extension Cord, and Power Cord.
  • 7-inch 4K Front Camera Unit
  • Soft Plastic Base
  • Suction Mount Bracket
  • Camera Extension Cord
  • Power Cord
  • Rear View Camera (if included in your model)

Installation and Setup

Rear Interface Description

Familiarize yourself with the rear interface connections before installation. The following describes the wiring based on the provided diagram:

  • Speaker Wires: Front Left (White/White-Black), Front Right (Gray/Gray-Black), Rear Left (Green/Green-Black), Rear Right (Purple/Purple-Black). Ensure speaker cables are not grounded, shared, or touching other lines to prevent sound distortion or unit overheating.
  • Power & Control Wires:
    • Red (ACC): Connect to Ignition Switch +12V.
    • Black (GND): Connect to Ground wire B-.
    • Blue (ANT): Connect to Radio Antenna.
    • Green (ILLUMINATION): Connect to Illuminate.
    • Brown (KEY): Connect to Steering wheel control.
    • Yellow (BATTERY): Connect to Power Supply +12V.
    • Pink (REVERSE): Connect to Reversing camera trigger.
    • Orange (BRAKE): Connect to Parking brake cable.
  • Audio/Video Ports:
    • FUSE: Integrated fuse for protection.
    • Video Output 1, Video Output 2: For external displays.
    • External Microphone: For audio input.
    • Left/Right Audio Output: For external audio systems.
    • CVBS Input: Composite video input.
    • Reversing Video Input (CAM IN): For rear view camera video signal.
    • USB Port: For data transfer and charging (only some models).

Important Power Note: The unit turns on normally when the Yellow (B+) and Red (ACC) lines simultaneously receive 12V positive power. The Yellow (B+) line maintains power for memory function.

Reversing Camera Installation

Follow these steps to install the reversing camera:

  1. Locate the reverse control line (Pink wire) on the unit's power line. Connect this Pink line to the positive 12V supply. The screen will turn blue when reverse is engaged.
  2. Locate the CAM video input interface at the back of the unit.
  3. Connect the reversing camera:
    • The camera typically has two sockets. Connect the red socket to the power cable.
    • Insert the yellow plug into the video cable.
    • Twist the red wire of the power cable and the wire of the video cable together and connect them to the positive pole of the reverse lamp.
    • The black wire of the power cable is not used.
    • Connect the other end of the video cable to the CAM video input interface on the back of the unit.
    • The red line coming out of the video line connects to the reversing control line of the power line.
  4. Ensure the camera is installed at the rear of the car.
  5. Important: If the camera is not installed, do not connect the REVERSE/BACK cable to any place. Otherwise, the unit may automatically enter reverse mode, causing malfunction.

Learning Steering Wheel Controls

To program your steering wheel controls:

  1. Press and hold a button on your original car's steering wheel.
  2. On the unit's screen, find the button icon corresponding to the function you want to assign.
  3. Click the icon on the screen to change its color. Successful learning is indicated by the icon changing color.

Wireless Carplay & Android Auto Setup

LEHX Dash Cam screen showing Wireless Carplay and Android Auto interface with navigation and music
The unit supports Wireless Carplay and Android Auto for seamless smartphone integration, as shown with navigation and music apps.

Apple CarPlay (Wired/Wireless):

  • Wired Connection: Connect your iPhone using a USB data cable. The CarPlay interface will launch automatically.
  • Wireless Connection:
    1. Enable Bluetooth and Wi-Fi on your iPhone.
    2. Connect to the unit's Bluetooth.
    3. The CarPlay interface will launch automatically. (Note: Signal is transmitted via Wi-Fi. If Wi-Fi is off, CarPlay will disconnect.)

Android Auto (Wired/Wireless):

  • This feature requires "Android Auto" software installed from Google Play and an Android 6.0 or higher phone.
  • Wired Connection: Connect your Android phone using a USB data cable. The Android Auto interface will launch automatically.
  • Wireless Connection:
    1. Enable Bluetooth and Wi-Fi on your Android phone.
    2. Connect to the unit's Bluetooth.
    3. The Android Auto interface will launch automatically. (Note: Signal is transmitted via Wi-Fi. If Wi-Fi is off, Android Auto will disconnect.)

This feature allows mirroring your smartphone screen to the DVR display.

For iPhone (Some models only):

  • Connect your iPhone to the unit. The phone screen content will be projected onto the car screen.
  • Note: Touch input is NOT supported on the DVR screen for iPhones.

For Android (Some models only):

  • Connect your Android device via USB data cable. You will be prompted to install an APP.
  • After installation, reconnect the data cable to enter screen mirroring mode.
  • You can operate from both the DVR screen and your phone screen.
  • Note: Image transfer is successful immediately. Audio is transmitted only after a successful Bluetooth connection.

Bluetooth Connection

To connect your phone via Bluetooth:

  1. Turn on the unit and enable Bluetooth on your mobile phone.
  2. Search for the unit's Bluetooth name (e.g., "XXXX") on your phone.
  3. Select the unit and click "Connect".
  4. If prompted, enter the pairing password (e.g., "XXXX").
  5. Once connected, you can answer calls and play music via Bluetooth.

Mounting and Flexibility

The device offers flexible mounting options and screen rotation for optimal viewing angles.

LEHX Dash Cam showing 180 and 360 degree rotation, and various mounting positions
The dash cam features 180° and 360° rotation capabilities, allowing for versatile positioning and viewing.

Operation

Voice Control & GPS Navigation

The device supports voice control for safe driving and integrated GPS navigation.

LEHX Dash Cam screen showing GPS navigation with voice command examples
Utilize voice commands like "Hey Siri, call Jeff" or "Hi, Google! Go home" for hands-free operation and navigation.
  • Use voice commands to control functions like navigation, music playback, and calls.
  • The built-in GPS provides accurate location and routing.
  • Support for Siri and Google Assistant enhances your driving experience.

Brightness Adjustment

Adjust the screen brightness for optimal visibility during day and night driving.

LEHX Dash Cam screen showing automatic brightness adjustment for day and night
The display automatically adjusts brightness for optimal viewing in both day and night conditions.

Remote Control Function

The device comes with a remote control for convenient operation. The following describes the button functions:

  • Volume +
  • Previous Track
  • Volume -
  • Next Track
  • SEL / Enter
  • Band (FM1-FM2-FM3)
  • Menu (Return to main interface)
  • Mode: Switch mode
  • Answer Call
  • End Call
  • Mute On/Off

Note:

  • Install two AAA batteries before first use.
  • If the remote control does not work, remove, clean, and reinsert the batteries. If it still fails, replace the batteries as they may be low.

Specifications

FeatureSpecification
Power Supply Voltage12-14.4V DC, Negative Ground
Max Current Consumption15A
Max Output Power4X60W
System Setup Password"113266"
Weight0.81 kg
Power SourceCorded Electric
APP CompatibilityYES
Built-in ScreenYes
Loop-Cycle Recording FeatureYes
Audio RecordedYes
NightShot FunctionYes
Rear CameraYes
Original PackageYes
Touch ScreenYes
Screen Ratio16:9
Memory Card Required Reading SpeedClass 10
Camera Resolution3840x2160 (4K)
Video CodeH.264
Video FormatAVI, MOV, MPEG-4, TS, MP4
Batteries IncludedNo
Special FeaturesG-Sensor, Display Rotate, Digital zoom, With Rearview Mirror, Built-in GPS, Radar Detector
Max External Memory128G
Number Of Lenses1 (Front, Rear camera is separate)
Imaging SensorSony IMX327
Display Size7 inches (as per product title)
OSD LanguageAlbanian, Arabic, Armenian, Azeri, Belarusian, Boolean text (Dutch South Africa), Bulgarian, Catalan, Chinese (Simplified), Chinese (Traditional), Croatian, Czech, Danish, Dutch, English, Estonian, Filipino, Finnish, French, Galicia, Georgian, German, Greek, Haitian Creole, Hebrew, Hindi, Hungarian, Icelandic, Indonesia, Irish, Italian, Japanese, Korean, Latin, Latvian, Lithuanian, Macedonian, Malay, Maltese, Norwegian, Persian, Polish, Portuguese, Romanian, Russia, Russian, Serbian, Slovak, Slovenian, Spain's Basque, Spanish, Swahili, Swedish, Thai, Turkish, Ukrainian, Urdu India, Vietnamese, Welsh, Yiddish
BatteryNone
Assembly ModeAfter The Loading Machine Integrated
Chipset ManufacturerAllwinner
Frames Per Second60
Item TypeCar DVR
CertificationCE

*Note: There is a discrepancy in display size between some specifications (11.3 inches) and the product title/main images (7 inches). Please refer to the product packaging for the exact display size of your model.

Troubleshooting

This section addresses common issues and provides solutions.

1) Cannot boot normally

  1. Wiring Check: Ensure the Yellow (positive), Red (key control), and Black (negative) wires are correctly connected. If only two lines are connected, the unit will not start.
  2. Car Line Compatibility: If the original car line colors do not match standard wiring, connecting directly may cause damage.
  3. Original Car Plug: Do not plug the original car plug directly into the new unit if it's not designed for it, as it may not work or burn out.
  4. Fuse Check: If the three wires are connected correctly but the unit doesn't boot, check the fuse on the yellow line. If the fuse is intact, twist the yellow and red wires together, turn on the key, and press the unit's power button.
  5. Persistent Fuse Blowing: If the fuse repeatedly blows, it indicates a short circuit in the unit's protection circuit. Seek professional repair or replacement. To confirm, connect the yellow and red wires to a 12V battery (positive) and black to negative. If it boots, the car's wiring is faulty. If not, the unit is defective.

2) Automatic shut-down

  1. Cable Error: If the blue cable (automatic antenna power supply) is connected to the unit's power cable, it will automatically shut down. Correct the wiring.
  2. Unstable Voltage: Test with a stable 12V-5A power supply. If it still shuts down, the unit is faulty.

3) There is noise

  1. Speaker Power: If the original speaker power is too low, noise will occur at high volumes. Avoid excessively high volumes.
  2. Grounded Speaker Cable: If a speaker cable is grounded, connect the iron speaker cable directly to the unit's speaker cable.

4) Remote control cannot be used

  1. Test Method: Use your phone camera to view the remote control's infrared light while pressing buttons. If the light doesn't illuminate, replace the batteries. If it illuminates, the remote control is functional.

5) Settings cannot be saved (no memory)

  1. Ensure the yellow and red lines are connected correctly (yellow to positive, red to key control).
  2. If reversed, swap their positions.

6) Bluetooth not working

Turn on the unit, search for its Bluetooth name on your mobile phone, and connect. After connecting, you should be able to make calls and play music.

7) The product emits smoke

Replace the FUSE. If the problem persists, the internal circuit is burned. Contact support for service.

8) The sound cannot be adjusted

  1. Reset the unit or unplug and replug the power cord.
  2. If the volume knob is broken, it needs to be replaced.

9) Reversing camera does not display

  1. Wrong or missing wiring: Refer to the "Reversing Camera Installation" section for correct wiring.
  2. Broken Camera: If the camera's light is not lit when properly wired, the camera is likely broken and needs replacement.

10) USB devices cannot be played

Format your USB flash drive to FAT32. Re-download one or two songs and try again. If it still doesn't work, replace the USB flash drive.

11) FM does not receive the radio station

  1. Ensure the antenna plug is fully inserted and the antenna line is not disconnected.
  2. Search for stations by pressing the "AS" button for automatic search, or use the "before" or "after" buttons.
  3. If the above steps don't work, unplug the antenna plug and use a screwdriver or metal strip to insert into the antenna port.

12) No sound right after installation

If there is no sound immediately after installation, it's usually a wiring error or a short-circuited original car speaker wire. Check for short circuits and reconnect if necessary. If only 2 speaker cables are present in the original car, you may need to re-route the original car line as one speaker requires 2 wires (total 4 wires for 2 speakers).

13) No sound after a while

Disconnect all speaker cables from the unit (do not remove them). Connect an external speaker to the gray and purple tail lines. If there is sound, the car's speaker line is short-circuited or the speaker is damaged. If there is no sound, the unit is broken.

14) Restore to factory settings

If Carplay, Android Auto, or Mirrorlink connections are abnormal, you can restore factory settings: Go to "Basic Settings" -> "Restore Factory" -> Select "YES". If a reset button is available on the panel, you can also press it.

Maintenance

  • Keep the screen clean using a soft, dry cloth. Avoid abrasive cleaners.
  • Ensure all cables are securely connected and free from damage.
  • Regularly check for firmware updates (if available) to ensure optimal performance and compatibility.
  • If replacing fuses, use only fuses with the specified rating (15A).

User Tips

  • For best performance with Carplay/Android Auto, ensure your phone's operating system is up to date.
  • Use a high-quality Class 10 microSD card for reliable video recording.
  • Periodically back up important video files from the microSD card to prevent data loss.
  • When using voice control, speak clearly and directly towards the unit's microphone.
  • Adjust the screen angle and brightness to minimize glare and maximize visibility during different lighting conditions.

Warranty and Support

This product comes with a 1-year warranty from the date of purchase.

For technical support, troubleshooting assistance, or warranty claims, please contact LEHX customer service through the following channels:

  • Engine WhatsApp
  • TikTok
  • Instagram (@LEHXCARRADIO)

PDF User Manual: A detailed user manual in PDF format is available for download. View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.