LEHX 11.3 inch 4K Car DVR

Contents

LEHX 11.3 inch 4K Car DVR User Manual

Model: 11.3 inch 4K Car DVR

LEHX 11.3 inch 4K Car DVR with navigation and car view on screen, highlighting 4K Ultra HD, 360° rotatable camera, Wireless Carplay, and Android Auto.

LEHX 11.3 inch 4K Car DVR with navigation and car view on screen, highlighting 4K Ultra HD, 360° rotatable camera, Wireless Carplay, and Android Auto.

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your LEHX 11.3 inch 4K Car DVR. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

2. Setup

2.1 Packaging List

Before installation, please verify that all components are present in the package:

Detailed packaging list showing the Host (11.3 inch screen), Soft Plastic Base, Suction Mount Bracket, Power Cord, AUX Cable, User Manual, Back up Camera (Optional), and 64G/128G TF card (Optional).

Detailed packaging list showing the Host (11.3 inch screen), Soft Plastic Base, Suction Mount Bracket, Power Cord, AUX Cable, User Manual, Back up Camera (Optional), and 64G/128G TF card (Optional).

  • Host (11.3 inch screen)
  • Soft Plastic Base
  • Suction Mount Bracket
  • Power Cord
  • AUX Cable
  • User Manual
  • Back up Camera (Optional)
  • 64G/128G TF card (Optional)
  • Camera extension cord (for 11.3 inch 4K Front Camera model)

2.2 Rear Interface Description and Wiring

The following diagram illustrates the rear interface connections for the device. Ensure all connections are made correctly to prevent malfunction or damage.

Diagram illustrating the 2 cameras and 3 recording channels: Front (360° Rotatable), Inside/Right (360° Rotatable), and Rear (1080P, 140°).

Diagram illustrating the 2 cameras and 3 recording channels: Front (360° Rotatable), Inside/Right (360° Rotatable), and Rear (1080P, 140°).

Rear interface wiring diagram for the LEHX Dash Cam, showing connections for speakers, power, antenna, and video inputs/outputs.

Rear interface wiring diagram for the LEHX Dash Cam, showing connections for speakers, power, antenna, and video inputs/outputs.

Wiring Connections:

  • Power (ACC): Red wire to Ignition Switch +12V.
  • Ground (GND): Black wire to Ground wire B-.
  • Battery (B+): Yellow wire to Power Supply +12V.
  • Illumination: Green wire to Illuminate.
  • Antenna: Blue wire to Radio Antenna.
  • Steering Wheel Control: Brown wire to KEY.
  • Reversing Camera: Pink wire to REVERSE.
  • Parking Brake: Orange wire to Parking brake cable.
  • Speakers: Front (White, White/black striped), Rear (Green, Green/black striped, Purple, Purple/black striped), Gray, Gray/black striped.
  • Video Outputs: Video Output 1, Video Output 2.
  • Audio Outputs: Left Audio Output, Right Audio Output.
  • Inputs: CVBS Input, External microphone, Reversing Video Input.
  • USB Port: (Available on some models).

Important Wiring Notes:

  • For normal operation, ensure both the yellow B+ and red ACC lines receive 12V positive power simultaneously.
  • The yellow B+ line maintains power for memory function.
  • Speaker cables must not be grounded, shared, or touch other lines to avoid sound distortion, no sound output, or device overheating.

2.3 Reversing Camera Installation

Follow these steps to install the reversing camera:

Reversing camera installation diagram showing connections to reverse light and the dash cam's CAMIN input.

Reversing camera installation diagram showing connections to reverse light and the dash cam's CAMIN input.

  1. Locate the reverse control line (pink wire) on the unit's power line. Connect this pink wire to the positive 12V supply. This will trigger the screen to turn blue when reversing.
  2. Locate the CAM video input interface on the back of the unit. Identify the positive and negative terminals of the backup light.
  3. The camera has two sockets: the red socket connects to the power cable, and the yellow socket inserts into the video cable.
  4. Connect the red wire of the camera's power cable and the video cable wire together to the positive pole of the reverse lamp. The black wire of the camera's power cable is not used.
  5. Connect the other end of the video cable to the CAM video input interface on the back of the unit.
  6. Connect the red line coming out of the video line to the reversing control line of the power line.

Note:

  • If the camera is not installed, do not connect the REVERSE/BACK cable anywhere. Connecting it without a camera will cause the unit to automatically enter reverse mode and malfunction.
  • If the camera is broken (e.g., the lamp doesn't light up when properly wired), replace it with a new one.

2.4 General Installation and Compatibility

Image comparing quick and easy dash cam installation to complex traditional car stereo wiring, and showing compatibility with various 12-32V vehicles.

Image comparing quick and easy dash cam installation to complex traditional car stereo wiring, and showing compatibility with various 12-32V vehicles.

The LEHX 11.3 inch 4K Car DVR is designed for quick and easy installation, compatible with a wide range of 12-32V vehicles, including cars, trucks, and RVs.

3. Operating Instructions

The device supports Apple CarPlay, Android Auto, and Mirrorlink for seamless smartphone integration. These functions can be used via wired or wireless connections (where optional).

Screenshots of the Wireless Carplay & Android Auto interface on the dash cam, displaying icons for music, navigation, messages, calls, news, and mobile apps, along with Mirror Link.

Screenshots of the Wireless Carplay & Android Auto interface on the dash cam, displaying icons for music, navigation, messages, calls, news, and mobile apps, along with Mirror Link.

Apple CarPlay (Wired/Wireless - Optional)

  1. Wired Connection: Connect your iPhone using a USB data cable. The CarPlay interface will launch automatically.
  2. Wireless Connection: Enable Bluetooth and Wi-Fi on your iPhone, then connect to the device's Bluetooth. CarPlay will launch automatically. (Note: Signal is transmitted via Wi-Fi. If Bluetooth is off, it will still transmit normally. If Wi-Fi is off, CarPlay will disconnect.)

Android Auto (Wired/Wireless - Optional)

This feature may not be supported in all countries and requires Google Play services to be available locally.

  1. Download and install the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.