HYULIGHTS HYU-150B

Contents

HYULIGHTS HYU-150B 180W LED Moving Head Light

User Manual

Model: HYU-150B | Brand: HYULIGHTS

1. Introduction

Thank you for choosing the HYULIGHTS HYU-150B 180W LED Moving Head Light. This professional lighting fixture is designed to provide powerful and versatile effects for various events and stages. To ensure your safety and proper operation, please read this manual thoroughly before installation and use.

This device is a powerful and versatile lighting solution, featuring beam, spot, and zoom capabilities, 24 rotating prisms, 14 gobos, and an 11-color wheel with a rainbow effect.

2. Safety Information

CAUTION! Keep this device away from rain and moisture!

CAUTION! Unplug mains lead before opening the housing.

Every person involved with the installation, operation, and maintenance of this device must:

  • Be qualified.
  • Follow carefully the instructions of this manual.

For your own safety, please ensure that installation and operation are performed by a verified technician who strictly follows these instructions.

3. Package Contents

Upon unpacking, please verify that all items are present and undamaged. In the carton box, you should find:

  • 1 x HYULIGHTS HYU-150B Moving Head Light
  • 1 x Power Cable
  • 1 x User Manual (PDF version available here)
  • 1 x DMX Cable
  • 1 x Omega Bracket

If any damage occurred during transportation, please consult your dealer and do not attempt to install the device.

4. Setup and Installation

4.1 Mounting Considerations

For added protection, mount the fixtures in areas outside walking paths, seating areas, or any location where unauthorized personnel might reach the fixture.

Before mounting to any surface, ensure the installation area can support a minimum point load of 10 times the device's weight. Always secure the fixture with a secondary safety attachment, such as an appropriate safety cable.

Never stand directly below the device when mounting, removing, or servicing it. Ensure the fixture is kept at least 0.5m (1.5ft) away from any flammable materials (e.g., decorations).

4.2 Clamp Mounting

The LED moving head features a unique mounting bracket assembly that integrates the bottom of the base, the included 'omega bracket', and the safety cable rigging point into one unit.

Rear view of the moving head light showing DMX In/Out and Power ports, and mounting points.
Rear view of the moving head light with DMX and power connections, and mounting points.

The diagram below illustrates the clamp mounting components:

Diagram showing omega-holders, clamp, safety-rope, and quick-lock fastener for mounting.
Mounting components: (1) Omega-holders, (2) Clamp, (3) Safety-rope, (4) Quick-lock fastener.

4.3 DMX-512 Control Connection

Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the moving head. Multiple moving heads can be chained together through serial linking. The cable required is a two-core, screened cable with XLR input and output connectors.

DMX connection diagram showing 3-pin XLR input and output, with pin assignments for Ground, Data (-), and Data (+).
DMX connection diagram: 3-pin XLR for DMX In/Out and Power. Pin assignments: 1: Ground, 2: Data (-), 3: Data (+).

5. Operating Instructions

5.1 Menu Instructions (LCD Display Screen)

The control panel features an LCD Display Screen and buttons for navigation (DMX, OK, Up, Down, Left, Right, ERR). Use these to access and adjust settings.

Video demonstrating the moving head light's features, including pan/tilt, color wheel, gobo wheel, prism effects, and control panel navigation.

Set Menu

  • Running mode: Select DMX mode (14 channels), Sound control, Auto mode (Demonstration 1-4), or Random mode. These modes allow the fixture to operate as a host or with other lights.
  • Address code: Set the DMX address code from 1-512.
  • Channel mode: Set the DMX channel to 14 channels.
  • Sound Sensitivity: Adjust sound sensitivity from 1-99.
  • Pan reverse: Reverse pan movement.
  • Tilt reverse: Reverse tilt movement.
  • Pan/Tilt exchanges: Swap pan and tilt functions.
  • Code wheel: Enable or disable encoding code wheel correction.
  • Signal timeout: Choose to maintain or cut light when the console is disconnected or the host signal is lost.
  • Screen Saver: Enable or disable the screen saver.
  • Colour Smooth: Adjust color smoothing.
  • Restore factory settings: Reset all settings to default.

Test Mode

Allows for testing individual channels. Initial values will change based on the selected mode (self-take or console mode).

Offset Adjustment

  • Pan Set offset: Adjust pan direction offset.
  • Tilt offset: Adjust tilt direction offset.
  • Color offset: Adjust color offset.
  • Gobo offset: Adjust gobo offset.
  • Focus offset: Adjust focus shift.
  • Magnification lens & 7-Color wheel offset: Adjust offset for magnification lens and 7-color wheel sheet.

Advanced Settings

  • Language switch: Switch menu language to Chinese or English.
  • Screen Reverse display: Switch the display direction of the screen.
  • Hours Clear: Clear the total time of use.
  • Top Protection temperature: If the detection temperature exceeds the set protection temperature, the brightness of the light decreases to prevent overheating.

Hardware Information

View information related to hardware components such as Pan Hall, Tilt Hall, Colour Hall, Gobo Hall, Gobo 2 Hall, Hall 7, Pan Code Hall wheel, Pan steps, and Tilt Code Hall wheel.

5.2 DMX Channels (14 Channels)

The fixture operates using 14 DMX channels. Below is a detailed breakdown of each channel's function and corresponding values:

ChannelFunctionChannel S (Values)Explanation
1Dimmer0-255Dimmer 0-100%
2Strobe0-10
11-255
No Strobe
Slow to fast Strobe
3Pan0-255Pan movement
4Pan fine0-25516bit Pan fine adjustment
5Tilt0-255Tilt movement
6Tilt fine0-25516bit Tilt fine adjustment
7Pan Tilt speed0-255Pan Tilt Speed adjustment
8Color0-4
5-9
10-14
15-19
20-24
25-29
30-34
35-39
40-44
45-49
50-54
55-59
60-64
65-69
70-74
75-79
80-84
85-89
90-94
95-99
100-104
105-109
110-114
115-119
120-200
201-255
White
White light + color 1
Color 1
Color 1 + color 2
Color 2
Color 2 + color 3
Color 3
Color 3 + color 4
Color 4
Color 4 + color 5
Color 5
Color 5 + color 6
Color 6
Color 6 + color 7
Color 7
Color 7 + color 8
Color 8
Color 8 + color 9
Color 9
Color 9 + color 10
Color 10
Color 10 + color 11
Color 11
Color 11 + White
Color clockwise fast to slow
Color clockwise slowly to fast
9GOBO0-5
6-10
11-15
16-20
21-25
26-30
31-35
36-40
41-45
46-50
51-55
56-60
61-65
66-70
75-80
81-150
151-200
201-255
White
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo 8
Gobo 9
Gobo 10
Gobo 11
Gobo 12
Gobo 13
Gobo 14
Gobo shake 1-14
Gobo clockwise fast to slow
Gobo clockwise slowly to fast
10Focus0-255Focus adjustment
11Magnification lens & 7-Color wheel0-127
128-191
192-255
Off
Magnification lens
7-Color wheel
12Prism0-127
128-136
137-255
Off
24 Prism
Prism slow to fast rotate
13Macro function0-5
6-55
56-105
106-155
156-205
206-255
NO effect
Auto 1
Auto 2
Auto 3
Auto 4
Random mode
14Restoration0-25NO effect (Resets Pan/Tilt/XY Motor)

6. Technical Specifications

FeatureSpecification
VoltageAC110-240V 50-60Hz
Light source180W White LED
Total power200W
Control panelLED Display Screen
Pan scan540° (16bit) Electric correction
Tilt scan270° (16bit) Electric correction
Color wheel11 Colors + Half color effect + Color rotating speed. Infinite rotating
Gobo wheel14 Gobos + Shake + Gobo Rotating speed. Infinite rotating
Prism1pcs 24 Rotating prisms
Lens1PCS 6 X Magnification lens, 1PCS 7-Color wheel
Beam zoom angle1.5° - 15°
FunctionsSound control, Auto, Master/Slave, DMX 512, RDM
Strobe25 times/sec
DMX channel14 channels
Dimmer0-100% With regulated constant color control
Net Weight (N.W)6.7 KG
Gross Weight (G.W)7.8 KG
Packing size41*28*27.5cm
CertificationCE, FCC, RoHS, UL, WEEE

7. Troubleshooting

If you encounter any issues during the use of this product, please refer to the following common solutions or contact customer support.

  • No light output: Check power connection, DMX signal, and dimmer settings. Ensure the fixture is not in strobe mode with a low value.
  • Incorrect movement: Verify Pan/Tilt reverse settings and DMX channel assignments.
  • Unresponsive controls: Check DMX cable connection and DMX address. Ensure the control panel is not locked.
  • Overheating: The fixture has a Top Protection temperature feature. If the internal temperature exceeds the set limit, the brightness will automatically decrease. Ensure adequate ventilation around the fixture.

Note: This product performs best with a smoke machine to enhance beam visibility.

If you have any questions during the use, please contact customer support for assistance.

8. User Tips

  • For optimal visual effects, consider using this moving head light in conjunction with a smoke or fog machine.
  • Always ensure proper ventilation around the fixture to prevent overheating and maintain performance.
  • Regularly check DMX connections for secure fit to avoid signal interruptions during operation.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to your purchase documentation or contact the seller directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.