Safety Warnings
Study, understand and follow all instructions provided with this product. Read these instructions carefully before installing, operating, servicing or repairing this tool. Keep these instructions in a safe, accessible place.
Caution: To help prevent personal injury,
- Never use this tool for any application other than for which it was designed.
- Never alter or modify this tool in any way. Improper operation and / or maintenance of the tool, or modification of the tool could result in serious injury or death.
- Always perform automotive testing in a safe environment.
- Do not attempt to operate or observe the tool while driving a vehicle. Operating or observing the tool will cause driver distraction and could cause a fatal accident.
- Wear safety eye protection that meets ANSI standards.
- Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
- Operate the vehicle in a well-ventilated work area: Exhaust gases are poisonous.
- Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests.
- Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running.
- Put the transmission in P (for A/T) or N (for M/T), and make sure the parking brake is engaged.
- Keep a fire extinguisher suitable for gasoline / chemical / electrical fires nearby.
- Don't connect or disconnect any test equipment while the ignition is on or the engine is running.
- Keep this tool dry, clean, free from oil / water or grease. Use a mild detergent on a clean cloth to clean the outside of the tool, when necessary.
1. Introduction
1.1 Vehicle Coverage
This diagnostic tool is specially designed to work with all OBD II compliant vehicles, including Controller Area Network (CAN). It is required by EPA that all 1996 and newer vehicles (cars and light trucks) sold in the United States must be OBD II compliant and this includes all American, Asian and European vehicles.
A small number of 1994 and 1995 model year gasoline vehicles are OBD II compliant. To verify if a 1994 or 1995 vehicle is OBD II compliant, check the following:
1. Vehicle Emissions Control Information (VECI) Label
It is located under the hood or by the radiator of most vehicles. If the vehicle is OBD II compliant, the label will designate OBD II Certified.

Image: Example of a Vehicle Emissions Control Information (VECI) Label.
2. Data Link Connector (DLC)
Government regulations mandate that all OBD II compliant vehicles must have a "common" 16-pin Data Link Connector (DLC).

Image: Diagram of a 16-pin Data Link Connector (DLC).
*Note: Some 1994 and 1995 vehicles have 16-pin connectors but are not OBD II compliant. Only those vehicles with a Vehicle Emissions Control Label stating OBD II Certified are OBD II compliant.
1.2 On-Board Diagnostics (OBD) II
The OBD II system is designed to monitor emission control systems and key engine components by performing either continuous or periodic tests of specific components and vehicle conditions, which will offer three pieces of such valuable information:
- Whether the Malfunction Indicator Light (MIL) is commanded "on" or "off";
- Which, if any, Diagnostic Trouble Codes (DTCs) are stored;
- Readiness Monitor status.
1.3 OBD II Definitions
The following terms and their definitions are related to OBD II systems:
- EOBD: European On-Board Diagnostics. Essentially the same as OBD II, with the same Data Link Connector and Communication Protocols.
- Communication Protocols: Allows different systems and sensors in a vehicle to communicate. There are currently five protocols: CAN Bus, J1850 VPW, ISO 9141-2, J1850 PWM, ISO 14230 KWP.
- Powertrain Control Module (PCM): The OBD II accepted term for the vehicle's "on-board computer." Controls engine management, emissions, and powertrain operation.
- DLC (Data Link Connector): The 16-cavity connector on the vehicle that allows communication between the computer system and the diagnostic tool.
- MIL (Malfunction Indicator Light): The vehicle's "Check Engine" warning light that activates when a DTC is stored.
- DTC (Diagnostic Trouble Code): A code stored in the computer system's memory, which helps to identify the fault condition that is causing the MIL to activate.
- Freeze Frame Data: Operating conditions that are stored when a DTC is stored.
- PID (Parameter Identification Data): Data returned by the vehicle's control modules to the diagnostic tool.
- Monitors: Diagnostic routines programmed into the PCM to run diagnostic tests and monitor emissions-related components.
- Enabling Criteria: Vehicle-specific events or conditions that must occur for monitors to run.
- Trip: A specific driving condition where all required "Enabling Criteria" for a monitor to run and complete its diagnostic testing are met.
- Drive Cycle: A specific mode of vehicle operation that provides conditions required to set all the readiness monitors.
- Warm-up Cycle: Vehicle operation after an engine off period where engine temperature rises to specific thresholds.
- Fuel Trim (FT): Feedback adjustments to the base fuel schedule (short-term for dynamic, long-term for gradual changes).
1.4 Diagnostic Trouble Codes (DTCs)
OBD II Diagnostic Trouble Codes are five-digit alphanumeric codes stored by the on-board computer diagnostic system. They identify problem areas and provide guidance on fault locations. The first character indicates the control system (P=Powertrain, B=Body, C=Chassis, U=Network), followed by a number (0-3) and three hex characters (0-9 or A-F) for specific details.
1.5 Location of the Data Link Connector (DLC)
The DLC is typically a 16-pin connector located 12 inches from the center of the instrument panel, under or around the driver's side for most vehicles. For some vehicles, the location may vary. If the DLC cannot be found, refer to the vehicle's service manual.
2. Product Description
The LAUNCH X431 ELITE V3.0 is a powerful bi-directional diagnostic scan tool designed for TOYOTA and LEXUS vehicles, offering comprehensive system diagnostics, advanced ECU coding, and numerous reset service functions with lifetime free updates via Wi-Fi.
2.1 Components & Controls
Video: Unboxing and overview of the LAUNCH X431 Elite diagnostic tool components.

Image: The package contents include the main unit, OBD diagnostic cable, user manual, and quick start guide.
| No. | Name | Descriptions |
|---|---|---|
| 1 | Charging port | Charge the tool via data cable (not included). |
| 2 | DB-15 diagnostic connector | Connect the diagnostic cable. |
| 3 | Power button | Turn on/off the tool. |
| 4 | Touch screen | Indicate the test results. |
| 5 | BACK button | Exit the current program or return to the previous screen. |
| 6 | HOME button | Navigate to the home (Job menu) screen. |
| 7 | Settings button | Quick dial to the Settings module. |
Key Features:
- Full-System Advanced Diagnosis: Detects all systems including engine (ENG), automatic transmission (AT), ABS, airbag (SRS), body control module (BCM), air conditioning system, suspension system, etc.
- Bi-directional Control (Active Test): Not only reads data but also sends commands to the vehicle to perform active tests (e.g., component action tests, system function checks).
- Advanced ECU Coding: Personalize car functions, generate and register unique codes for new parts, promote smooth communication between vehicle systems.
- 34+ Reset Services: Includes SAS Reset, Brake Reset, Oil Reset, IMMO Reset, TPMS Reset, BMS/BAT Match, ABS Bleeding, ETS/ELEC.TH ROTTLE R, DPF, AFS Reset, Sunroof, Gearbox Learn, EGR Adaption, Language Change, A/F, Coolant Bleed, NOx Sensor, Seats Calibration, and more. (Note: Availability of reset functions varies by vehicle model.)
- Auto VIN Scan: Smart AutoVIN technology for fast and precise vehicle identification.
- 4-in-1 Live Data Stream: Combines multiple graphs on one page for comprehensive data analysis.
- Diagnostic Report & Feedback: Generate health reports, print or send to customers, and use the feedback function for problem-solving.
- Diagnostic History: Detailed record of each diagnostic session for quick review and continued work.
- Lifetime Free Update: Software updates via Wi-Fi.

Image: The LAUNCH X431 ELITE V3.0 scanner showing diagnostic trouble codes for engine and transmission.

Image: Key programming features and examples of bi-directional control tests such as fuel rail pressure, injector buzz, mirror operation, A/C activation, and wiper tests.

Image: A visual representation of the various free service functions available on the diagnostic tool, including resets for EPB, Injector, Oil, ABS, Crankshaft, BMS, Throttle, and Seats.

Image: Advanced ECU Coding capabilities, illustrating functions like component matching, ECU replacement, personalization, and examples such as folding rear mirrors, adjusting light brightness, and auto door lock/unlock.

Image: Overview of the all-in-one diagnostic scanner features, including Auto VIN Scan, DTC Lookup, Live Data Stream, Battery Voltage Display, Online Feedback, and Diagnostic Report sharing.
3. Setup and Initial Use
3.1 Powering Up The Tool
There are two methods available for powering up the tool:
- Via Data Cable: Plug one end of the data cable (not included) into the charging port of the tool, and the other end to a PC.
- Via Diagnostic Cable: Insert the diagnostic cable into the vehicle's DLC port.
When the tool is powered on, the screen will automatically light up.
3.2 Getting Started (First-Time Use)
If it is the first time you have used this tool, you need to make some system settings:
- Press the [POWER] button to turn on the tool. The screen displays a welcome page. Tap "Start" to go to the next step.
- Choose the desired system language, and tap "Next step".
- Choose the time zone of your current location. The system will automatically configure the time according to the time zone you selected.
- The system will automatically search for all available Wi-Fi networks. Choose the Wi-Fi needed.
- After the network connection is done, tap "Next step" to configure workshop information. Input the required information, and tap "Next step" to go to the next step. (Note: After you configure it, the system will append it on the report every time a report is successfully generated.)
- Carefully read all terms and conditions of the user agreement, check "Agree to all the above terms", and tap "OK" to complete the registration process. It will automatically jump to the Job Menu.
4. Operating the Diagnostic Tool
4.1 Job Menu Overview
The Job Menu includes the following function modules:
- Diagnose: Configures the tool to operate as a professional diagnostic tool.
- OBD II: Quick check for DTCs, MIL status, monitor status, and other emission-related services.
- Upgrade: Updates vehicle diagnostic software and APK. (Requires stable network connection).
- Mall: Subscribes to extra vehicle diagnostic software or reset functions not included with the tool.
- Settings: Manages data and system settings (Network, Workshop information, Brightness, etc.).
4.2 Vehicle Connection for Diagnosis
- Turn the vehicle ignition off.
- Locate the vehicle's 16-pin Data Link Connector (DLC).
- Plug one end of the diagnostic cable into the vehicle's DLC port, and the other end to the DB-15 diagnostic connector of the tool. Tighten the captive screws.
- Turn the ignition on. The engine can be off or running.
Caution: Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
4.3 System Diagnosing
This function is designed to diagnose electronic control systems of a single vehicle model.
4.3.1 Smart Diagnosis (Auto-Detect)
This function quickly accesses vehicle electronic control systems by decoding the VIN, without manual menu selection. After connecting and turning the ignition on, the system enters auto-detect mode.
- Ensure "Automatic detection on connect" in "Settings" is ON.
- A stable network connection is recommended for successful VIN access.
- If VIN is successfully obtained, the system scans vehicle systems and generates a diagnostic report (accessible via Settings -> Data -> Diagnostic Report).
- If VIN access fails, you will be prompted to input the VIN manually.
4.3.2 Manual Diagnosis
If auto-detect fails, you can perform manual diagnosis by executing menu-driven commands and following on-screen instructions.
- Before diagnosing, ensure the corresponding vehicle manufacturer software is installed.
- The diagnostic menu may vary by vehicle make, model, and year.
4.3.3 OBD II Diagnosis Functions
After connecting to the vehicle's DLC and selecting "OBD II" from the Job Menu, the tool will automatically detect the communication protocol and display monitor status. The following functions are available:
- Read Codes: Identifies the section of the emission control system that has malfunctioned.
- Erase Codes: Clears codes from the vehicle after repairs. (Ensure ignition is ON, engine OFF. Do not erase codes if taking the vehicle for repair, as valuable information may be lost.)
- I/M Readiness: Checks if emissions-related systems are operating properly and are ready for Inspection and Maintenance testing.
- Data Stream: Retrieves and displays live data and parameters from the vehicle's ECU.
- View Freeze Frame: Captures a snapshot of operating conditions when an emission-related fault occurs.
- O2 Sensor Test: Retrieves O2 sensor monitor test results.
- On-Board Monitor Test: Retrieves test results for non-continuously monitored emission-related powertrain components.
- EVAP System Test: Initiates a leak test for the vehicle's EVAP system.
- Vehicle Info: Retrieves VIN, CID (Calibration ID), and CVN (Calibration Verification Number).
4.4 Data Stream Analysis
The tool offers three types of display modes for data viewing:
- Value: Displays parameters with numbers and lists.
- Graph: Displays parameters with wave patterns.
- Combine: Merges graphs for easier comparisons (up to 4 items simultaneously).

Image: Example of a 4-in-1 live data stream graph analysis on the LAUNCH X431 ELITE V3.0 scanner.
4.5 Special Functions
The tool offers coding, reset, relearn, and other service functions to restore vehicles to functional status after repair or replacement. Available tests vary by vehicle manufacturer, model, and year.
4.6 Diagnostic History
The tool records details of each diagnostic session. The History function provides direct access to previously tested vehicles, allowing users to resume operations without starting from scratch. Diagnostic records are listed in date sequence.
5. Maintenance and Updates
5.1 Upgrade Diagnostic Software & App
All software is updated periodically. It is recommended to update and install the latest software version for the best service, functions, and experience.
- Diagnostic software pre-installed on the tool is free of charge forever.
- Diagnostic software purchased in the "Mall" is free for one year. Renewal is required after this period.
To update: Tap "Upgrade" on the Job menu to enter the update center. Ensure a strong and stable Wi-Fi connection.
5.2 Renew Subscription
When the free period for purchased diagnostic software expires, it will be locked. To unlock, renew the subscription via the "Upgrade" menu. Input the 24-digit PIN code from a Subscription Renewal Card (purchased separately).
5.3 Clean Up
This option allows users to clear cache files and free up storage space.
5.4 Firmware Fix
Use this module to upgrade and fix diagnostic firmware. During fixing, do not cut power or switch to other interfaces.
6. Settings
The Settings menu allows you to customize various aspects of the tool's operation:
- Units of measurement: Set to Metric System or English System.
- Automatic detection on connect: Enable/disable automatic VIN detection upon connection.
- Brightness: Adjust screen brightness and standby time.
- Sound: Adjust volume and other sound settings.
- Network: Configure WLAN for registration, software updates, and email.
- Time Zone: Set the device's time zone.
- Language: Change the operating language. Supported languages include English, Traditional Chinese, Spanish, French, German, Italian, Russian, Portuguese, Japanese, Korean, and Polish.
- Workshop information: Add a personalized tag to diagnostic reports.
- Recovery: Reset the tool to default factory settings (Warning: May cause data loss).
- Screen Capture: Toggle the Screen Capture icon visibility.
- About: Displays hardware configuration and license agreement.
- Data: Access Diagnostic Record, Diagnostic Report, DTC Library, and DLC Location.
- Feedback: Send diagnostic problems for analysis and troubleshooting.
- Image: View and manage screenshots.
- User Manual: Access the integrated user manual.
7. Troubleshooting (FAQ)
1. System halts when reading data stream. What is the reason?
It may be caused by a slackened connector. Please turn this tool off, firmly connect the connector, and switch it on again.
2. Screen of the tool flashes at engine ignition start.
Caused by electromagnetic disturbing, and this is normal phenomenon.
3. There is no response when communicating with on-board computer.
Please confirm the proper voltage of power supply and check if the throttle has been closed, the transmission is in the neutral position, and the water is in proper temperature.
4. What to do if the system fails to start auto VIN detection?
Please check the following possible reasons:
- Whether the tool is properly connected to the vehicle's DLC port.
- Whether the "Automatic detection on Connect" switch is OFF. If yes, slide it to ON.
5. Why are there so many fault codes?
Usually, it's caused by poor connection or fault circuit grounding.
6. How to upgrade the system?
- Switch the tool on and ensure a stable internet connection.
- Tap "Settings" on the Job Menu, select "About" -> "Version", and tap "Detect the System Version" to enter the system upgrading page.
- Follow the on-screen instructions step by step to finish the process. It may take several minutes depending on the internet speed, please be patient. After upgrade is successfully finished, the tool will automatically restart and enters the Job menu.
8. User Tips
- For specific vehicle compatibility, especially for hybrid models or older vehicles, it's recommended to contact the seller with your car's brand, model, and release year to confirm supported functions.
- When dealing with airbag (SRS) errors after minor incidents, the tool can often identify and clear the fault message, as reported by users.
- Always ensure a stable internet connection for software updates to prevent interruptions.
9. Specifications
| Attribute | Value |
|---|---|
| Screen | 4" touch screen with a resolution of 480*800 |
| CPU | 4-core 1.3GHz processor |
| RAM | 2GB |
| ROM | 16GB (Actual available space: 24.31 GB, remainder occupied by system) |
| Wi-Fi | 802.11b/g/n 2.4GHz, 5 GHz |
| OBD II Input Voltage Range | 9~18V |
| Power (W) | 5V 1.5A 7.5W |
| Android Version | 8.1 |
| Battery Capacity | 3000mAh |
| Package Dimensions | 185*108*33.5 (mm) |
| Main Cable Length | Approximately 117 cm |
| USB Cable Length | TYPE-C interface, approximately 73.5 cm |
| Product Weight | <540 g |
| Software Version | 2026 Version |
| Hardware Version | 2026 Version |
| Communication Interface | OBD-II |
| Software Update | Yes |
| Is Batteries Included | Yes |
10. Warranty and Support
Warranty
LAUNCH® electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty is expressly limited to persons who purchase LAUNCH® products for purposes of resale or use in the ordinary course of the buyer's business.
This warranty does not cover any part that has been abused, altered, used for a purpose other than for which it was intended, or used in a manner inconsistent with instructions regarding use. The exclusive remedy for any automotive meter found to be defective is repair or replacement, and LAUNCH shall not be liable for any consequential or incidental damages.
Final determination of defects shall be made by LAUNCH in accordance with stipulated procedures.
Customer Service
If you have any questions on the operation of the unit, please contact the seller, or contact LAUNCH TECH CO., LTD.:
- Website: www.x431.com
- Website: www.cnlaunch.com
- Phone: +86 755 2593 8674
- Email: DOD@cnlaunch.com
For a detailed user manual, please refer to the official PDF document: User Manual (PDF)